P
PrintablesAst0815
Gridfinity holder for folding ruler
Print the model twice and space them with 4 empty Gridfinity slots in between for a “standard” metric folding ruler.
- Downloads
- 138
- Likes
- 18
- Rating
- 5
All models
Counting matching models…
P
PrintablesAst0815
5-inch rack (10inch halfrack) Raspberry Pi 4B mount
A mounting solution for Raspberry Pi 4B in a 5-inch rack / 10-inch halfrack . Requires 6 ISO 10642 countersunk M3x10 screws and fitting heat set inserts. The M2.5 screws to mount the Pi screw directly into the plastic.
- Downloads
- 87
- Likes
- 19
- Rating
- 5
P
PrintablesAst0815
Bluetti EB3A 120 mm Fan Mount
The Bluetti EB3A has a small internal fan that spins up periodically when charging, even in “silent charging” mode. It is quite loud and annoying. With this silent 12V 120 mm fan mounted to the exhaust, I hope to prevent this from…
- Downloads
- 74
- Likes
- 11
- Rating
- 0
P
PrintablesAst0815
Minimal Dremel / rotary tool flexible shaft holder
A very simple holder for my rotary tool flexible shaft. Mounts to anything with two M4 screws.
- Downloads
- 58
- Likes
- 9
- Rating
- 0
P
PrintablesAst0815
5-inch rack 10-inch half-rack system
The 10-inch rack system is just a bit too big for my printer. Also I wanted to be more flexible with how I fill my network rack. So I created the 5-inch rack system, or the 10-inch halfrack system! Nothing complicated, just a half-rack…
- Downloads
- 51
- Likes
- 15
- Rating
- 5
P
PrintablesAst0815
Cetus3D Tool Holder
Simple tool holder to hold the tools that came with the Cetus 3D printer. Fusion360 project link: https://a360.co/2JfKc77 Print Settings Printer: Cetus 3D Rafts: No Supports: Doesn't Matter Resolution: 0.25 mm / 0.5 mm Infill: 15 %…
- Downloads
- 41
- Likes
- 6
- Rating
- 0
P
PrintablesAst0815
Simple mount for 5-inch rack / 10-inch halfrack
A simple solution to mount box-shaped things in a 5-inch rack or 10-inch halfrack . The brackets are held in place with ISO 10642 countersunk head M3x10 screws.
- Downloads
- 30
- Likes
- 8
- Rating
- 0
P
PrintablesAst0815
Towel rail TP holder
A TP holder to fit my towel rail. There is something pleasing about things clipping snugly together... Fusion360 link: https://a360.co/2uPJLvU Print Settings Printer: Cetus 3D Rafts: No Supports: No Resolution: z: 0.25 mm, x/y 0.5 mm…
- Downloads
- 30
- Likes
- 3
- Rating
- 5
P
PrintablesAst0815
Soft jaw for vice
My little vice has indents on one jaw, but is flat on the other. To make it easier to hold flat things like PCBs, I designed and printed this soft jaw to fit over the flat end. Fusion360 link: https://a360.co/2VyZfn9 Printed upside down,…
- Downloads
- 28
- Likes
- 7
- Rating
- 0
P
PrintablesAst0815
Improved Cetus MkII fan duct w/ cooling control
I designed a new fan duct for my Cetus MkII. It is closely modelled after the original. I added a wall under the duct to the thermal barrier, to insulate the heating block from the air flow some more. It also has a little "control…
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
PrintablesAst0815
Coffee grinder nut adapter for cordless drill operation
I have a manual coffee grinder, but am annoyed by the manual operation. Instead of buying an automatic grinder, I printed an adapter to use my cordless drill. https://a360.co/2Utmwoj In Action Category: Kitchen & Dining
- Downloads
- 25
- Likes
- 1
- Rating
- 0
P
PrintablesAst0815
Parametric vase-mode insert for sorting boxes
I had to reorganize one of my cheap sorting boxes and getting the tiny parts out of a compartment was a pain. So I decided to never do that again and designed these inserts. The boxes are parametric, designed in FreeCAD. Print in vase…
- Downloads
- 25
- Likes
- 2
- Rating
- 5
P
PrintablesAst0815
Towel Rail TP Holder Mk2
Made with FreeCAD, fully parametric.
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
PrintablesAst0815
Coffee-grinder to moka-base adapter
I dropped my coffee grinder and broke the receptacle for the ground beans. Having no coffee is no option, so I designed and printed an adapter to screw the grinder directly to the lower half of the moka pot. Added a vertical tube to keep…
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
PrintablesAst0815
Magnetic kitchen hood hook
A simple hook to be attached to my kitchen hood using a 10x10x4 mm magnet. https://a360.co/2VVPGxu Category: Kitchen & Dining
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesAst0815
Cetus Mk2 custom X-axis endstop mount
I upgraded the CPU of my Cetus Mk2 with a Tinyfab CPU ( https://www.tinyfab.xyz/ ). That meant I had to add some end stops. Fixing them with hot glue worked well as a temporary measure, but something more permanent was in order after it…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
These are all currently available results.