14 models
Testmodel to test the layer adhesion of PETG. PETG tends to lose layer adhesion or become brittle when the humidity is to high. Model details: 25x25x25 (mm) 1mm Wall thickness 0.95m Filament 2.85g Filament
Speficication IKEA Samla 22L 4mm thickness Printing TPU or other soft/flexible filament 35mm/s Printing Speed 100% Fan at Layer 2 0.8mm Retraction Lenght 0.5 Z hop when retracting 150mm/s Travel Speed Versions 4 Part Model for average…
I found this TUSH Remix on Thingiverse and just wanted to Share this on Printables as well.
I printed the Thingiverse VAG - Tampon PEZ dispenser in two different colors for my wife and a friend of her. Both found it very funny. I noticed that thicker tampons tend to work better. However, the design doesn't work with smaller…
There are two models, one for double side tape and one with boreholes. Dimensions 160mm wide 40mm tall 80mm with the extension 5mm boreholes Print 50%+ infill PLA+/ABS/ASA No support needed
Pin dimensions Pin: Diameter 4.9mm, length 9mm Pin base: 13.9mm high, 10mm wide, 2mm thick. Pin pad: 17mm long, 10mm wide, 2mm thick Printing Printed with support 50% infill Ideal for PLA, ABS, ASA etc.
Speficication ESP32 Camera Camera Module + ESP32 Printing PETG/ABS/ASA 50mm/s Printing Speed 40% Fan 0.4mm Retraction Lenght 0.5 Z hop when retracting 150mm/s Travel Speed
The Shopping Cart Token has the same dimensions than 1 Euro Coin Update: 01.05.2025 I made a stronger Version of the V2 Model and did some minor Tweaks. With 15% Infill you need only 1,72g Filament and with 100% Infill only 1,83g.…
The Mount is designed for the IKEA LACK Enclosure Hack. The Tapo C100/110 Camera fits perfectly. I designed two versions, one for double adhesive tape and the second for M4 Screws.
Chair Leg Protective Cap Diameter: 21mm, with wall 19mm Inner diameter Wall: 2mm Printing 15% filling Printed in PP Perfect for soft materials like TPU, PP etc.
I designed this holder to secure the bottle on a shoulder/neck strap. Fits perfectly and tight! Printing: PETG/PCTG 15/25% infill
Kaeptn's simple drip tray I needed a simple drip tray. The printing is quick and easy. Waterproof with PLA? Yes 25% Infill > 3 Walls STEP-File I also added the STEP-File of the 100mm drip tray if you want create your own Remix.
IKEA PAX Wall Bracket A simple model to attach an IKEA PAX cabinet to the wall. Designed according to the original model. The model should ideally be printed in PETG/PCTG or ABS/ASA. PLA is not recommended. Warning: This Model should be…
Kaeptn's shower curtain rod I made this shower curtain rod because the brackets in the ceiling never held due to the sand plaster. Rod Connector Dimensions Outer diameter: 20mm Innter diameter: 17mm Screws: M4 Flat Rod Connector…
These are all currently available results.
