Counting matching models…
Part of learning CAD, decided to model up a 16 x 16 MILS template. I have not converted my city to MILS, but may do in future. Prints should be under 150grams, which is way cheaper than the going rate for bulk bricks to waste underneath…
CADed this up, printed mine with esun black and yellow, and prusament orange in PETG on my Klipperised Mega X, whilst klipperising my Prusa Mini+.
Just made the chamfers parallel is all **Update, klipperised my Prusa Mini, and had horrible walls, needed to reduce retraction speeds due to the bondtech extruder (which is weird because it was fine before at higher speeds) and play…
Again, uploading as a proof of concept, this fits whatever make and model of the luggage I was asked if I could make it for. I'm taking on anything to learn CAD better at the moment, so I'll likely revise this to make a more generic one,…
So someone in the MMCC asked if anyone could CAD this from some shots from season 3, so I did. With blasters, I like to cut them in half and print each side and then join them together. I haven't printed this one, but I aimed to make it…
I tried so many downloaded roku remote battery covers, there must be many versions. Printed it in PETG at 0.2mm, the "I made this" on the back might be nicer with a smaller nozzle and/or lower layers, but this was my second revision and I…
I recreated the original which is awesome for USB and other small cables, this one is a bigger bro for appliance size cables, shown in my pic on my dremel next to a regular sized one. I can make bigger if you want, hit me with the cable…
This exists because I am procrastinating on making progress with python, Linux and learning to better utilise my pis. I have driven this around my house using a pi & Adafruit motor hat like a little FPV car, controlling it from my PC, and…
Have not printed this yet, however I have used the same variations in the stud diameter and the stud hole diameter that I have used on printable parts with all of my printers that are compatible with my real lego, printed on any of my…
So yeah, troubleshooting random crashes, short version, removed all the vertical graphics card hardware (didn't solve the problem) and wanted something to fill the empty slots that wasn't using all the screws and kept dust out a bit…
Broke it this evening before making my kiddo his dinner, grabbed my trusty non digital calipers after dinner and banged this out. Printed mine with my standard PETG profile on my Voron 0.1 and it fit nicely. The dimensions match where…
Got a new weber slate, it came with big clunky clips, my tongs and stuff had smaller holes so I made these to be able to hang them on the side.
UPDATED I have added a bunch of shapes with a flat bottom, these are to place under modular (thin) baseplates on a flat surface, one raises the studs to be on the same level as a plate, one is for two plates, the other takes the studs to…
Was working on a DFRobot chassis with a pi and some hats and Adafruit nylon standoffs and wanted something to be able to grab them in between or under PCBs or the chassis and came up with this and working on a few other tiny tools now.
Klipperised my mini, still having some dramas getting a decent bed mesh with defined bad spots for the magnet locations, designed this spiral with concentric chamfers so it has no little spots to extrude on and takes a nice path, when…
My pics aren't the best, hopefully the functionality is better though, I printed this in wood pla that I can't seem to get as nice as PETG. The pot itself should have plenty of drainage for any small plant or bonsai. Whacked a miyagi do…
Been using pouring epoxy resin to cover PLA+ printed armour and helmets and stuff, was making a few small things that I wanted to coat in resin to be able to clean them easily and came up with this solution. No idea how many mils it is, I…
Found a similar idea ages ago on thingiverse, but made this one from scratch. Prints well in PETG, likely better in PLA, do the pause print thing and contrast colour change.
Still finalising my HEPA filter desk fan using 3 x 140mm corsair fans I had lying around, it needed a grille/duct to focus the output, and I went with the aperture style. It looked cool so I made a thinner version, in case anyone's PC…
https://www.tactixtools.com/productinfo-2342.html https://www.tactixtools.com/productinfo-2356.html I got these for hardware, but they needed more sub divisions. You can mix and match to add more subdivisions as you please. I can fit all…
Did this ages ago. Doing some PC maintenance and decided to use the ones I had printed and left in my watercooling parts box. Bottom of the pic is a chunky earlier prototype, the file is the narrow one closer to the CPU block. Updated to…
** UPDATED Got better at CAD, so redesigned the shroud, and the bump bit around the switch that cradles the group head. With the shroud the stock one grabs the group head too much so you have to wriggle to not still make a mess. This new…
I made two versions, both can utilise colour changes at layers in order to have a tombstone colour, a lettering colour and a bird logo colour. I started printing mine before I finished the design because I was impatient. I'd suggest…
I printed it all out in PETG with my tuned profiles and for some reason I couldn't get the nut and bolt to screw together, so I CADed up a new one, it is a bit bigger, but small enough that it still rests on a flat face so it shouldn't…
I have been using a lot of eSun's refillable PETG spools and filament these: https://esun3dstore.com/products/esun-3d-filament-reusable-spool-pc-transparent-3d-printing-removable-filament-spool-for-1kg-pla-petg-spooless-refilament. Unless…
Yeah yeah, the petg is a bit stringy, but it works, I made the gap between rows bigger in the released file, the rest is the same, do a layer change, get your contrast, then you can put the bits in here and use the magnetic driver to take…
This will hold a D5 pump res nicely in front of 140mm fans. It will add 5mm on to the bolt length needed. Uses the supplied rubber anti vibration part around the pump. The top support is not tight on the lid, it is purely there to prevent…
I have a red billetworks shifter and reverse lockout on my IRL car, so I figured why not replicate it for my PC. Modelled off the IRL one, I've made two versions one with bulging piston rings and one with cutouts, the reason being that…
I bought a bunch of magnets ages ago and have started embedding them in projects, these use some tiny 3mm diameter discs that are 2mm thick, and the voron spec magnets I had leftover, 6mm diameter discs 3mm thick. More of a proof of…
Been using the trianglelab heater core since it came out, tried their dragon on my 0.1 build but it didn't last long, there must have been a tolerance issue causing a tiny leak that built up over time. Their new TD6 hotend has a dragon…
I really wanted to see how my mini would go with klipper, but I didn't want to snap the mainboard and mod the prusa board. I also wanted to add neopixels for lighting the camera view. I wanted to get rid of the need for the external pi…
Was making a different addon to the OEM knob when I decided to model up and make an old red steam valve. First one in PETG couldn't handle the heat, so I went back in to CAD and made a higher temp insert part. I have printed mine in Sunny…
Remix from here: https://www.printables.com/model/57214-mini-printable-parts
So basically, I've been raising seedlings and whatever on my windowsill, and had the idea of being able to pour water through the screen of the open window without having to cut through or lift the edge of the insect screen. I had some…
Wanted a handle that I could flick on and off. Ended up modelling the OEM part then making this to fit, there's 2 versions, one where the handle aligns with the bump on the original, and one that aligns to the gap between them, so you can…
Got these bad boys to sort my lego by building under a lego city table with them, they come in four sizes and they slot together well. Once I'm finished sorting and I have fully assembled I'll take a decent pic. Critical flaw is that the…
These are all currently available results.
