Counting matching models…
I designed this upgraded Bag Coat Hanger (Heavy Duty Version) as an upgrade to my original design. Like the original model this version has been designed to be an easy support free print as long as you orientate it as shown in the bed…
If you like this check out my Vernier & Pen Desk Organiser and Watch Stand that goes with this. Vernier & Pen Desk Organiser by SD-3D | Download free STL model | Printables.com Watch Stand by SD-3D | Download free STL model |…
I designed this Bag Coat Hanger to carry on with my wardrobe organisation as we have too many bags in the house that are always in the way. This is a simple self-supporting print that requires no supports if you orientate the part as…
Another cable clip! I designed this as I wanted to do a project with my son to use up the last bits of PLA left on our spools. It’s a simple design with a slight taper on the gap that prevents the cables from popping back out. Easily…
I designed the Rope Hook to fit easily over guide lines that are already secured. No need to undo the guide line, just simply slip the hook over the existing rope. I have added grooves to prevent the rope from slipping out. This should…
I designed this phone stand with two positions for your tablet or phone. It can be printed in a single colour or in two colours to bring out the side features as I have done using the Orca multi colour setting. It is designed so no…
I designed this double coat hook with an added strengthening rib running through the centre of the part to add extra wall loops inside the hook. This is the same feature I've added to previous models I designed to increase their strength.…
I designed this to organise my wardrobe and create more space. If you want to do the same you may also want to check out my other models in this collection. Bag Coat Hanger (Smaller Hook) by SD-3D | Download free STL model |…
I designed this as the final version of my Coat Hanger Hook collection. Even though my previous two versions were extremely well received, there were a few requests for a smaller version as not all bags could fit over the hook profile.…
I designed this Heavy Duty Grocery Bag Carrier with an added strengthening rib running through the model the same as the Bag Coat Hangers I designed. These strengthening ribs add extra wall loops in the centre of the part. That means the…
Fishing Rod Holder with a left and right bracket for a total of four fishing rods that can be either wall or ceiling mounted. For an easy hassle-free print orientate them model as shown in the bed picture. As always, I'd love to see…
I designed these hooks to organise my garden shed by hanging all my garden tools along the wall out of the way. It is a simple practical self-supporting design that anyone can easily print. I have strengthened the countersunk holes by…
This is an updated version of my original minimalist Glasses Stand. I wanted a design that was complex and bold while still being a practical model that could be used every day. The gyriod structure is mesmerising to look at and is also…
I designed this to replace the existing rope tensioners that came with my tent. I've added three sizes, but you can scale the model as desired. Add some to your backpack in case of emergencies when camping or hiking or put a handful in…
Clip the Croc and Shark beach towel clips to the corners of your towel and stake them into the sand to stop your towel from blowing away. I printed these using the Orca multilayer setting to change the filament colour and give these guys…
I designed this paracord winder with added holes in the handle to attach to your backpack when hiking or camping, so you always have spare paracord when needed. If you like this model, check out my Rope Tensioner, Rope Hook and Webbing…
Fishing Lure Mould for casting your own silicone lures at home.
This is a set of spoon rests that come in three different sizes, but can be scaled to whatever size you need.
This is the upgraded version of my original Rope Hook model. The main difference is this version has a carabiner feature that allows items to be clipped in securely. It is designed to fit easily over guide lines that are already secured.…
I designed this putting aid to help improve my sons aim with the added benefit of the ball rolling back to him if he doesn’t manage to get it in the target spot. I have also added a blank insert if you just want to have some fun getting…
I designed this as it is that time of year here in the UK to start getting the garden ready for the summer. There are two sizes depending on the size of your hands. The large is just right for me but is too large for my wife so I added a…
I designed this for my wife to hang her bag on the table/desk to keep it off the floor. It can be printed in a single colour or in two colours to bring out the side features as I have done using the Orca multi colour setting. It has been…
I designed this addition to my garden shed organisers to be able to hold my ‘T’ shape handled tools. Like the original this is an easy self-supporting print that needs no supports as long as it is orientated as shown in my printer bed…
This finger guard is designed to reduce the risk of cuts when using a knife. I made a small version for my son as he loves to cut his own vegetables and we always worry about him cutting himself. It can be scaled to whatever size best…
I designed this Horse Bridle Bracket to help organise the stables that my wife attends and as a gift to say thanks for all their help. The hook has the added inner wall loops running through the centre that I have been adding to most of…
I designed this replacement pull cord in four different sizes for 3mm; 4mm; 5mm & 6mm cords. The holes are oval to ensure no supports are required when printing as shown in my printer bed picture. As always, I would love to see pictures…
Decorative bowl that can also be used as a plant pot.
I designed these hooks to organise my garden shed by hanging all my gardening hand tools along the wall out of the way. It is a simple practical self-supporting design that anyone can easily print and is an addition to the Garden Spade…
I designed this as I am always using my verniers at work and home, but never get round to putting them back into their cases to keep them protected. They just end up left on my desks where on day someone is bound to knock them off. This…
I designed this Shark Chip Clip for a bit of fun in the kitchen with the kids. The only problem is they like taking it off and on which means the crisps don't last that long. I've printed mine with the Orca slicer multilayer setting to…
I designed this bracket to organize our bike shed as my sons’ scooters are always in the way and it makes it difficult to get the bikes in and out of our Keter Bike Shed. My original design has a cut out feature in the back to mirror the…
I designed this bird feeder for a single fat ball because the grey squirrels here in the UK eat all the bird seed left out for the birds. This is a simple support free print if orientated as shown in the print bed picture. The feeder is…
I designed this so I can attach my webbing easily to a rope that can then be secured to the ground or another anchor point. Once the webbing is attached to the tensioner, thread the rope trough the holes and tension as required. I have…
I designed this because I lost my original one and think every toolbox should have one. This is made in two pieces with interlocking features to ensure both sides line up and the blade can’t ride up through the clamped faces when pressure…
I designed this as my wife got sick of having to get the hairdryer out of the draw and plug it in everyday when she needed it. Our room doesn't have enough surface space to leave it out all the time. It is desinged to be printed support…
Printed on Ender 3 V3 SE at 0.2mm layer height with 0.4mm nozzle. Purple = eSUN PLA+ 1.75mm Yellow = eSUN PLA+ 1.75mm
I designed this hook because my parents have just moved into a rented accommodation and are not allowed to drill holes in the doors to hang their coats and bathrobes. There is a choice of either a single or double hook. I have added extra…
Printed on Ender 3 V3 SE at 0.2mm layer height with 0.4mm nozzle. Green = eSUN PLA+ 1.75mm Updated version: I have added extra ribs to the part and different shaft diameter options.
Printed on Ender 3 V3 SE at 0.2mm layer height with a 0.4mm nozzle using Orca multi layer setting. White = Ender Series PLA 1.75mm Red = eSUN PLA+ 1.75mm Blue = Ender Series PLA 1.75mm
I designed this because the hairbrushes in our house are always full of hair and even though I have a shaved head, I'm the only one who cleans the hair out of them. I printed this in PLA at a 0.12mm layer height to achieve a smoother…
I designed this Snake Chip Clip for a bit of fun in the kitchen with the kids. The only problem is they like taking it off and on which means the crisps don't last that long. I've printed mine with the Orca slicer multilayer setting to…
I designed this Coat Hook with a concealed wall mount to hide the mounting screws and give the hook a cleaner look. This hook has a rib running through the centre of the hook feature to add extra wall loops inside the hook. This is the…
I designed this Old School Fingerboard Deck for my son as he’s always wanted one but we just can’t seem to get our hands on a Tech Deck version. We printed the deck on its side with tree supports and he sanded the sides to remove the…
If you like this check out my glasses holder that goes with this. Glasses Holder by SD-3D | Download free STL model | Printables.com I designed this for my size watch so I suggest that you print the loop first to check the fit of your…
I designed this because I’m vegan and my wife is vegetarian, so we eat a lot of tinned pulses and legumes with most meals. Using a standard sized colander seems overkill for one tin. This colander is large enough for the contents of one…
I designed this plant pot with a hidden compartment to keep my valuables close to hand but out of site. It's a simple support free print that is held together by 6 x Ø8mm strong round magnets. I also modelled the internal pot to be a…
I designed this Coat Hook with a concealed wall mount to hide the mounting screws and give the hook a cleaner look. This hook has a rib running through the centre of the hook feature to add extra wall loops inside the hook. This is the…
This is a more aesthetically pleasing updated version of my original Vernier & Pen Desk Organiser. I have been using my original version every day at home and work since I made it. The original was designed to be functional with not much…
Printed on a Ender 3 V3 SE at 0.2mm layer height with a 0.4mm nozzle. Red = eSUN PLA+ 1.75mm Black = GratKit PLA+ 1.75mm Yellow = eSUN PLA+ 1.75mm
Printed on Ender 3 V3 SE at 0.2mm layer height with a 0.4mm nozzle. White = Ender Series PLA 1.75mm Red = eSUN PLA+ 1.75mm Black = Ender Series PLA 1.75mm
Simple photo clip to display your precious memories.
I designed this fingerboard obstacle for my son as he really loves finger boarding and wanted something different. He told me what he wanted and we designed it together. I used the multicolour setting in Orca Slicer to achieve the red…
Printed on Ender 3 V3 SE at 0.2mm layer weight with a 0.4mm nozzle using Orca multi material option. Orange = eSUN PLA+ 1.75mm White = Ender Series PLA 1.75mm Black = GratKit PLA 1.75mm
I made this for my son to go with his other basketball 3D prints. Lakers Logo by SD-3D | Download free STL model | Printables.com NBA Logo by SD-3D | Download free STL model | Printables.com Bulls Logo by SD-3D | Download free STL model |…
I made this for that person we all know. As always, I would love to see pictures of your prints.
I designed this for my son so he could open his own tins of soup for lunch.
I designed these brackets because I'm running out of desk space and don't always use my Windows Surface. I've made it as a two-piece design so they could be used with different-sized laptops, but they may need scaling to suit your needs.…
Some 2D wall art for my gym to make me put that little extra effort in when exercising. As always, I would love to see pictures of your prints.
I made this cake topper for my sons birthday cake. I would love to see pictures of it on your cakes.
I designed this Printables Coffee Coaster made in two parts to enter into the Flash Contest: Single Extruder – Dual Colour. I have an Ender 3 V3 SE so this was a perfect contest to take part in. I used Prusa PLA Galaxy Black and Orange…
These are all currently available results.
