109 models
I made this for my chronic rhinitis, I can now breathe well through my nose, and different models for different noses It takes some getting used to having it in your nose, I don't have now to use a medicinal nasal spray anymore This can…
I made a nice Phone Amplifier Passive Speaker Bottom 204.29 x 165.83 x 35 mm Top 215.29 x 176.83 x 15 mm Horn 111.35 x 111.35 x 131 mm Phone Hole 80 x 15 mm
I made a nice Pipe Clamp Pipe Clamp Ø 12/15/22 mm pipe hole Ø 4.5 mm screw hole Ø 8 mm top screw hole Pipe Clamp Bottom 12 mm:55 x 20 x 18.75 mm 15 mm: 26 x 20 x 20 mm 22 mm: 63 x 20 x 20 mm Pipe Clamp Top 12 mm: 49 x 27 x 14 mm 15 mm: 50…
I made a nive Coin Bank Coin Bank 180.2 x 180.2 x 150 mm - Coin Bank 241.7 x 110.3 x 15 mm - Carrier 60 x 60 x 11.9 mm - Clossing Lid 25 x 124 x 19.5 mm - Intermediate Beam 7 x 34.9 x 4.7 mm - Wedge
I made this triangle ruler for the, Flash Contest - Back To School. Triangle Ruler Used for 10cm 124 x 124 x 5mm
I made a clothespins, this one can you hang on the laundry rack. ClothesPins 47.5 x 74.5 x 7.5mm I made one extra with serrations.
I made a nice egg holder. Egg 57 x 45 mm format Egg M/L
I made this long triangle ruler for the, Flash Contest - Back To School. Long Triangle Ruler Used for 10cm x 17cm 203 x 117.25 x 5mm
I Made a nice FlagPole Swivel Mount ( ring ) Use only outside support, remove support then press the ring loose I made an extra swivel mount for the top, for a better movement FlagPole Swivel Mount Ø 30 mm inside 47 x 62 x 34 mm FlagPole…
I made a nice MakeUp Organizer for mine daugther My daugther make the drawnig, i made the design and printed it MakeUp Organizer 369 x 175 x 169 mm - MakeUpOrganizerDrawer 369 x 175 x 119 mm - MakeUpOrganizerTop 53 x 38 x 6 mm - LockSlide…
I made this ruler for the, Flash Contest - Back To School. Ruler Used for 20cm 210 x 20 x 5mm
I made a nice marble game. Drop the marbles above in de board en see the poins they wil fall in. MarbleDrop 250 x 255 x 143mm Ø 16mm - marble
I made a nice chess board game, with flat pieces and a box with a lid. Box 100.5 x 71 x 28 mm Boxlid 100.5 x 71 x 11 mm Board 280 x 280 x 4 mm Pieces 30 x 30 x 4 mm
I made a nice Marble Roller Track MarbleTrack 250 x 110 x 213mm Ø 16mm - marble
Zrobiłam ładny alfabet-puzzle Dzieci mogą go używać do zabawy i nauki Można go używać jako tablicy z literami Alfabet-puzzle - Ramki 101.25 x 125 x 10 mm - dla lewej ramki 102.5 x 125 x 10 mm - dla środka 101.25 x 125 x 10 mm - dla prawej…
I made a nice Tile Constellation Sign - Virgo Tile 150 x 150 x 5 mm
I made a nice Tile Constellation Sign - Capricorn Tile 150 x 150 x 5 mm
I made a nice Tile Constellation Sign - Libra Tile 150 x 150 x 5 mm
I made a nice Tile Constellation Sign - Aquarius Tile 150 x 150 x 5 mm
I made a nice Tile Constellation Sign - Scorpio Tile 150 x 150 x 5 mm
I made a nice Tile Constellation Sign - Gemini Tile 150 x 150 x 5 mm
I made a nice Tile Constellation Sign - Aries Tile 150 x 150 x 5 mm
I made a nice 3d Puzzle Cube 3d Puzzle Cube 150 x 150 x 150 mm
I made a nice Coin Bank Piggy Coin Bank 173.6 x 80 x 177.7 mm - Piggy 37.7 x 60 x 3 mm - Lid
I made nice playing cards. PlayCards 87.5 x 57.5 x 3 mm
I made a nice Tile Constellation Sign - Cancer Tile 150 x 150 x 5 mm
I made a nice Tile Constellation Sign - Pisces Tile 150 x 150 x 5 mm
I made a nice Tile Constellation Sign - Taurus Tile 150 x 150 x 5 mm
I made a nice marble Track modular blocks You can made your own idee to stack the tracks I use a tree support for the tracks, with 1 layer minus of the top for a beter release. I was updated the tracks a littlebit Marble Track PipeBottom…
I made a nice EggHolder for 12 eggs EggHolder 150 x 200 x 133mm
I made a nice MörkrÄdd Night Light Cover The cover give less light on the top You can use difirent filaments to make a filter You can fix it with double sided tape or (super) glue MörkrÄdd Night Light Cover 49.9 x 29.3 x 20 mm Ø 45 mm…
I made a nice Tile Constellation Sign - Sagittarius Tile 150 x 150 x 5 mm
I made a nice holder, you can use it for a tablet or a phone I use it for mine Lenovo Idea Tab 11" Holder 120 x 155 x 80 mm
I made for my co-worker @work a nice Diamond Painting Tray Diamond Painting Tray 106 x 156 x 13 mm
I made my own Soup Bowl. You can scale it for you own wishes. Soup Bowl 157.5 x 125.5 x 75mm Ø 120 mm You can use filament what's safe for food. The Best Food-Safe 3D Printer Filaments in 2024
I made a nice Halloween Coffin Vase Halloween Coffin Vase 98 x 98 x 135 mm
I made a nice Tile Constellation Sign - Leo Tile 150 x 150 x 5 mm
Kit Spatulas I printed for the first time with ePETG. 4 mm 6 mm 8 mm 10 mm
A nice Geometric Lion Keychain Scale it according to needs. 71.2 x 68.4 x 3.75 mm
I made a nice marble Track modular blocks You can made your own idee to stack the tracks Marble Track Ø 16mm - marble Top01 Top02 Top03 Top04 Between11.43mm Between40x40x40mm Bottom40x40x40mm Bottom40x40x34.33mm Bottom40x40x28.71mm…
I made a nice insert Box for the Bosch Kiox Display Headunit BUI330 It's easy to take it with you in your pocket Insert Box 55.11 x 26.5 x 59 mm
I made a nice Emoji Smiley Keychain Emoji Smiley Keychain Ø 50mm
I made nice playing cards. Other wil follow (Diamonds, Joker) . PlayCards 87.5 x 57.5 x 3 mm
I made a nice Halloween Candle Lantern Halloween Candle Lantern 175 x 175 x 237 mm
Ich habe ein schönes Puzzlealphabet gemacht Kinder können es als Spiel zum Spielen und Lernen verwenden Sie können es als Buchstabentafel verwenden Puzzlealphabet - Rahmen 101.25 x 125 x 10 mm - für den linken Rahmen 102.5 x 125 x 10 mm -…
I made a fun solitaire game in a box. You can use your own marbles, or make them yourself. Box 155 x 155 x 25 mm Marbles 16 mm ( standard size )
I made a Fish Scratcher for scratching a fish with an itch Fish Scratcher 40 x 26 x 200 mm
I made a nice legs for the coffee table You can use it also for other tableś or projects legs 200 x 360 x 90 mm
I made a Tile for a marble game outside. Marble Tile 300 x 300 x 60mm Ø 25mm - Marble
Our mailbox on the inside of the front door keeps giving off a cold draft, so I made this one. Print it all on de backside flat Use the insulating tape, which you stick on the wide edges against which the lid falls I used nano tape to…
I made a nice Valentine Sphere Valentine Sphere Ø 207 x 207 x 204 mm Valentine Sphere Holder Ø 225 x 225 x 39 mm
I made nice playing cards. Other wil follow (Joker) . PlayCards 87.5 x 57.5 x 3 mm
I made a nice Love Emoji Smiley Keychain Love Emoji Smiley Keychain Ø 100mm
For a request @work i made this Tv Remote Control Holders Tv Remote Control Holders Cap - 9.5 x 9.5 x 3 mm Cap - 9.5 x 9.5 x 6 mm TvRemoteControlHolder - 61 x 51 x 115 mm TvRemoteControlHolderflat - 61 x 51 x 100 mm
A nice Geometric Lion You can hang it on the wall, there is a hole on the back. Scale it according to needs. 237.4 x 228 x 12.5 mm
I made a nice Halloween Candy jar Halloween Candy jar 195 x 195 x 95 mm
I made a nice Storage Box with 7 drawers in it Storage Box 267.32 x 159.80 x 100 mm Drawers Drawer01 - 103.75 x 105 x 51.13 mm Drawer02 - 219.51 x 105 x 36.80 mm Drawer03 - 244.40 x 105 x 54.45 mm Drawer04 - 93.80 x 105 x 100.79 mm…
I made nice playing cards. PlayCards 87.5 x 57.5 x 3 mm
Because my rear fender is missing (broken), I made a wet protector. I printed it diagonally so it fit on my print bed and could be printed in one piece. Printed without skirt. Wet Protector 470 x 120 x 1.2 mm 65 mm by the seat post
For @work i made a pencilholder, with a magnet strip on de backside. We use it for stick it on filing cabinet. Pencilholder 208 x 50 x 30mm
I made a nice PillBox Holder I used nano tape to stick it PillBox Holder 164.5 x 113.5 x 60 mm PillBox 155 x 105 x 26 mm
I made a nice 3d Puzzle Box 3d Puzzle Box 200 x 200 x 67.5 mm - Basic 24.2 x 7.25 x 14.6 mm - Part01 - 100 Pieces needed 15 x 7.25 x 14.6 mm - Part02 - 100 Pieces needed 206 x 206 x 10 mm - Edge
I made a nice vase Vase 183.5 x 183.5 x 200 mm
When it rains moisture comes in without this roof, that's why I made this. Spy eye Ø 32 mm Roof 45 x 45 x 20 mm
I made nice playing cards. Other wil follow (Joker) . PlayCards 87.5 x 57.5 x 3 mm
Hice un lindo alfabeto de rompecabezas Los niños pueden usarlo como un juego para aprender Puedes usarlo como tablero de letras Alfabeto de rompecabezas - Marcos 101.25 x 125 x 10 mm - para el marco izquierdo 102.5 x 125 x 10 mm - para el…
My CEO @ work, ask my to make a nice WhiteBoard Accessory Holder I print the one without de pencil holders If you wil use the pencilholder, the pencils must always placed horizontal WhiteBoard Accessory Holder 163 x 68 x 120 mm WhiteBoard…
The letterbox has a thin open slot at the top. When it rains, it gets very wet inside, that's why I made this roof. Made 2 versions. Mailbox 365 x 80 mm
I made a nice Dualcolor Cupcake for the contest: “Single Extruder - Dual Color”
I made a nice light dimmer button, because te old one @work was broken Light Dimmer Button 43 x 43 x 18 mm Ø 4.7 mm hole inside
I made a nice holder for mine Wahoo Elemnt WFCC1 I place it on mij steering wheel for mine Crivit Urban X3 Holder Mount 40 x 108.8 x 16.6 mm
I made a holder for the background rolls, for our great format scanner @work. I must use 2 of it. I tested this print with my first roll of ePETG Bracket 106 x 97 x 40 mm Roll Ø 25 mm
Our back door does not hang straight on the hinges, and does not close properly in the top corner. The cold draft then enters through the sealing rubber. That's why I made this strip for the top and the long side of the door, on which I…
I made this nice tealight holder for 4 tealight, and 4 spare tealight placed at the bottom. I use a tree support, with 1 layer minus of the top for a beter release. Pay attention to fire safety !!!!! TeaLight Ø 150 x 56 mm Ø 39 mm for the…
I made a nice Mini Bags Holder We stick it with nano tape We use this at the toilet, for the wet wipes Mini Bags Holder 60 x 100 mm Ø 7.5 x 65 mm Bags format Ø 7.6 mm, hole Ø 25 x 58 mm
I made a nice Numbers and Digits - Mathematical Signs Kids can learn from it You can use it as number board Numbers and Digits - Mathematical Signs- Frames 101.25 x 125 x 10 mm - for the left frame 102.5 x 125 x 10 mm - for the Middle…
I made a nice Wallplate for the Ikea Vallhorn for less dust on the sensor Wallplate 85 x 85 x 85 mm
I made a nice Ventilation Exhaust Valve Cover Cover 145 x 22 mm 160 x 22 mm
I made a nice Tile. Update: i made a typo mistake “Woman” i chaned to “Women” Thanks to Mark Edwards The changing of the pictures come later Tile 150 x 150 x 5 mm
I made a nice Tile. Tile 150 x 150 x 5 mm
I made a solitaire board with 4 games on it. You can use your own marbles, or make them yourself Board 300 x 300 x 7.5 mm Marbles 16 mm ( standard size )
When it rains, our hallway becomes very wet, because the rain seeps in through the door. That's why I made this strip, it is also slightly slanted, so that the rain no longer comes in. Scale FrontdoorThresholdEdge.stl for the lenght of…
I made this for the insect protection in our bedrooms and bathroom. The bottom has drain holes, for the rainwater. U can scale the middle ones, to fit your needs. I stick it outside and inside with nano tape.
I made a nice Vase U can scale it for your need 10 Water-Resistant Options for Your 3D Printed Parts Vase Ø 200 x 270 mm
For those who like to eat their own color M&M My color is blue and yellow Tray 115 x 75mm
I made an other ToothPaste Holder U can use it for big and small toothpaste with also toothbruses U can stick it with nano tape ToothPaste Holder 60 x 110 x 104 mm Ø 35 mm toothpaste big Ø 27.5 toothpaste small
I made 4 of this nice TV Mount leg Risers Because we now have a soundbox and it works best in the middle of the TV. I made these support risers so that the soundbox does not obstruct the TV sensor, as it is located in the middle at the…
I made a nice Tile. Tile 150 x 150 x 5 mm
I made a nice Tile. Tile 150 x 150 x 5 mm
I made a nice Tile. Tile 150 x 150 x 5 mm
The rubber seal for the USB port of my bicycle lights has come off, so I made a cover to prevent the USB port from getting wet during bad weather. Cap Rho 0.5, 39.38 mm round to round inside 30.4 x 23.17 mm inside 17 x 2 mm wall 2.5 x 1.3…
I made a kitchen countertop water protector for around my water tap. The inlays, i used the bottom side up for a beter and smooth surface so the water drains better. TIP Print the KitchenSinkTrayInlay first and masseure for the…
I made a nice abstract vase 10 Water-Resistant Options for Your 3D Printed Parts Abstract Vase 150 x 102 x 105.5mm
When we turn off the tap with wet hands, the countertop gets so wet, that's why I made this I temporarily used the leftovers filament for this, until I have the right filament or until I have a completely different idea for a different…
I made a nice Valentine Day Valentine Day 150 x 135 x 20 mm
I made a nice Bicycle Trailer Connector, for the Atran Velo AVS system I can't use the original seatpost mount because the trailer would then bump against the back of the bike. That's why I made this one, so the trailer can be attached to…
I made a nice Tile. Tile 150 x 150 x 5 mm
I made a nice Tile. Tile 150 x 150 x 5 mm
I made a Learning Alphabet ABC, kids can learn from it Learning Alphabet ABC 150 x 100 x 150 mm A 43 x 44 x 15 mm B 38 x 43 x 15 mm C 41 x 45 x 15 mm
I made a holder for our laundry rack I used 6x M6 kelp bolt Laundry Drying Rack Wall Holder 148 x 120 x 78 mm Ø 5.25 for the hole Spacer 50 x 50 x 92 mm Ø 5.5 for the hole and the slot
