13 models
A remix of RepresentativeBlink mount for the Afterburner on an Ender 3 with an MGN12 rail, for StealthBurner also changed Added tie wrap holders to the top for cables Removed nuts that hold the two sections together and replaced them with…
I was looking for a recirculating carbon filter for my Voron v0.2 printer but encountered some limitations with the Nevermore solution due to space constraints. Instead, I found the MFNano project by MappleLeafMakers, which seemed like a…
Wanted a fidget spinner but am picky, So I made my own Print the center cap and center inserts at .1 everything else at .2 Please note. you will need to glue the inserts into the caps.. I used a small clamp I found on here to hold them…
Basic Switchwire or Enderwire mount for a U2C. You will need 2 M5 10mm screws and t-nuts to mount this.. Then 4 M3 6mm (4 or 8 will work too) to mount the U2C to the mount.
Modified RackRoller for RepRack that uses threaded inserts and M3 screws. Also added was mount for 4mm reverse bowen tube Didn't have the threaded forming screws so I made this which uses the same threaded inserts used in the Voron…
After my child lost the back of our remote I finally decided to remake it… This was designed in Onshape and have included the step file for anyone who wants to use it as a template for a case with an airtag or something… Supports will be…
After buying an EBB36 can-board for my V0.2 tool-head, I re-worked the great design by KayosMaker to fit my personal needs.. Notice the strain relief veers off to the left and rear.. this is to keep the canbus cable from interfering with…
My 8yld child has decided that taking the backs off remotes and putting them back on is satisfying which means that backs to remotes are missing. I found another remote back on here for this remote, but it did not fit well so I made a new…
This mount is intended for the Switchwire and mount to the 30x60 extrusion at the base. Works with or without the enclosure. Unfortunately supports are needed for this but they should be pretty basic and easy to remove. This is not for an…
Needed a place for 4 elitedesk psu's in a 10 in mini rack.. Noticed that the bottom of the rack had an additional .5 u so I took advantage of that and made this mount.. There is also space for the cable slack beside each holder.
Didn't have the Plastite screws screws so I made a new crossmember that can be used with M3 heated inserts and M3 screws.. Also wanted something that can be printed on its side as the strength was a concern..
Simple spacer for Lance Greens MasterSpool to fit Inland filament
I was not happy with nozzle mounts on the revo system as the spring just doesnt put enough pressure to hold the ADXL in place while running IS tests. I also wanted something a little closer to the center of gravity for the toolhead.. This…
These are all currently available results.
