Counting matching models…
update 11/06/22 Since I realised that the solution I had to make new parts of the clockwork extruder, namely changing the bolting direction to the x-carriage, was now the same as the clockwork 2 method chosen by Voron Design, it now means…
Two angles because I made one, it worked perfectly, but wasn't at the angle normal sprinkler heads are, so I increased the angle. Both work well, second one in action. Made for a can with a 18.5mm diameter push-fit nozzle. Printed in…
Anycubic Mega S cable-chain brackets for heated bed cable to avoid constant flexing at the same points, made for a purchased cable-chain with the 3-hole fixing.
Made the bolt aperture wide enough to fit a M3x5x4 heat-set insert to avoid stripping the thread or having to fiddle around with M3 nuts. Two versions, one slim and one with about a 5mm depth for the insert, because the slim one makes you…
M3 heatset inserts used with M3 countersunk bolt for securing.
I didn’t have the same size washers to hand, so I edited the model to take 24mm OD 12mmID 1.6mm thick ones that I did.
Bracket for attaching things to the frame of the Anycubic Mega/S series printers, using a M3 heat set insert to provide a thread on the bracket for bolting things on.
I added a magnet under the holder and secured the back with a simple clip.
16mm barrel, 61mm OD bottle, with a 8.4mm gap between the barrel and bottle. Intended for M3 heatset thread and 20mm countersunk M3 hex bolt as pinch.
I found in the slicer a couple of warnings about printability and decided I could remove the flat bridging areas
I noticed that there were many for Core One, but not for L (holes are different aligned to the fan housing) And that the flow through aspect was not covered, most designs had a out the top exit which forces the air to turn and flow not…
I wanted to add the side plate drawer to an Ikea standing desk using the pre-installed M4 threads for control plate
I made a trash/bin out of a razer side-plate tray intended for under-desk storage
These are all currently available results.
