Counting matching models…
Print the cartridges at whatever setting you like. The ones pictured were printed at .16mm layer height for improved curves. A Mouse-ear brim in the corners may be necessary to prevent the corners from warping. For the HueForge prints: I…
By far one of my favorite eras for Link! I've learned a lot about organic / tree supports while trying to print this model. I have had issues with the sword, sheath, and cap using slicer generated tree supports. My suggestion is to add…
Multiboard is the creation of Jonathan (Keep Making). See the Multiboard.io website for more details. As with most Multiboard prints, use .2mm layer height, 15% infill, and 3 walls.
Intro I already had some Silk Gold PLA and was able to fine tune it for ring shapes. So I tried using slicer based “painting” to change Jéjé's model to print a light yellow color for the letters and the gold for the outer area. It sort of…
Holds about 16 bottles of 10mL insulin. I made it to fit inside the footprint of the very small Frigidaire table-top minifridge (bottom of fridge measures about 135x135x125mm). -Please ignore the terrible top surface quality of my print…
About this model: This has been modeled for the Netgear Nighthawk M6 (MR6110) It is a simple snap fit outer case, made from PLA, PETG, or whatever filament you like. There is an inner “sleeve” designed for TPU. I mimicked basic phone case…
I designed this battery key for my Medtronic insulin pump (770/780G) because I never have a coin nearby and I don't use the pump clip that came with the device. Modeled loosely after the late Wilford Brimley's iconic mustache and glasses…
The remix model measures the same as the “Sandwhich” box from Dante, but has “Snack Bags” on the lid. Note that the tabs are different than the actual sandwhich box from Dante, so print both of the files out for the complete box.
Need to filter out the nastiness of plastic fumes and keep an enclosure cool enough for PLA? Here's my solution. This was designed in OnShape. Feel free to open there and change any tolerances or sizes you want Design: This fan and filter…
This fits the cheaper and smaller Tripod branded as “Amazon basics” here in North America. I've included a step file to make it easy to adapt. I printed in ABS because these tripods usually stay in vehicles outdoors when not in use. I…
Holds up to 12 test strip containers. Designed for Accu-chek guide test strips. Other accu-chek may fit. I didn't like how much space the boxes take up so I made this little holder.
I designed these models with the simple carved or wood turned Räuchermann in mind. They are used to burn incense around the holidays. I have included 3mf files that have the models painted and in the orientation that I used to print. The…
Simple voronoi style narwhal. The incense that's placed through the front becomes the “horn.” Printed at .2mm layer height, .4mm nozzle, in a eryone silk PLA. Had to use lots of tree supports. For a more flat bottom, drop the model…
I modeled this in cad (OnShape) to challenge myself. I took inspiration from a simple mobius strip design, which really only has one “side.” If you want to print it in two colors, the base is 10mm high. Change filament at 10.2 (or…
These are all currently available results.
