Counting matching models…
Cable Holder for avoiding that cables fall off the table :-D one version for thin cables (like USB / Ethernet) and one for thicker cables (Display Port / DVI / HDMI...) Also, on request there is also a new version for 2 small and 1 big…
Can be printed in any material on a printer with sufficently tight tolerances without supports. The screw needs some inital force to start turning well. If your printer tolerances are too loose, consider scaling the screw slightly.
Bottle holder for plastic bottles with 75mm diameter. Inspired by Nalgene 32oz Water Bottle Bike Holder by Dutch Goldblum Print instructions Category: Sport & Outdoors Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No…
Very quick and easy printable without supports. I printed it on my MK2.5 in PLA with 0.35mm layer height.
A cute rocket whose tip can be screwed open to hide somehing in it or as a interesting case for a gift. Print instructions Parts Needed: 1x rocket_body 1x rocket_hat 1x rocket_fire 2x rocket_window 4x rocket_wing Most parts can be printed…
Cookie cutters, nothing special about them :-D Print instructions Can be printed in any suitable material, I printed them in PETG
Print with multiple periphery layers (6+) to increase stiffness.
Blade Holdr for single blade razor blades like X670 Single Edge Razor Blades like Amazon link It needs a screw to fix the blade (seems to ber M2 x 3, salvaged from old electronics). Post a comment and i will update the model to use the…
Prints in any material without supports. I printed it in PLA with 0.35mm layer height on a Prusa I3MK2.5
Notebook stand for HP EliteBook 845 G7 that allows for a better height when used in combination with a separate keyboard
Print in a flexible material such as TPU, I printed it in Extrudr Flex Medium (98 Shore A)
Box for a deck of 36 playing cards with french symbols embossed on the lid Can be used for cards of dimension 57x89mm Print instructions Category: Toys & Games Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: Doesn't Matter…
A spinning top toy Print instructions No Supports / Raft required Printed in PLA
Holder for Ski Poles Printed without supports on Prusa i3 MK2.5 In PLA
Stand for Flipper Zero. Variants with and without bumper case.
Planning poker cards for scrum planning poker. can be printed with a manual color change on 0.6mm. If you desire other numbers let me know. Print instructions Print with 0.2mm layers. Add a manual color change after 2 layers, usa a dark…
Best printed on a Multi color Printer (Prusa XL or MMU/AMS) Can be printet without supports. For the large variant the Prusa XL size is necessary
Prints without supports in any material. If you want it machine washable, consider printing in ABS or PETG
A decorative star to hang as christmas tree decoration. Print instructions Printed in 3 parts without supports. The cube in the middle is for aligning the part and easier gluing. If the fit is too tight or the cube does not fit at all…
Cartesian coordinate cross as support for 3d design and robot programming. Used as helper for euler angle rotations Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.15 Infill:…
Laptop Stand for Dell Latitude 5421
Needs a MMU or other multi material unit to be printed. I printed it in PLA but it can also be printed in any other suitable material.
Can be printed without support in any material. I printed it with 0.35mm layer heights in Prusament PETG.
NFC tag holder for nfc stickers. I used it for providing WiFi information to guests without having them to type down the SSID and password. Can also be used for providing adresses, links... Print instructions Category: Office Print…
Prints in place without supports. Usa a rigid material such as PLA for the print. I printed it in Matterhackers PolyTerra PLA.
This knob comes handy when the soft touch surface of the original knob gets tacky and sticky. To replace pry away the glossy cap on top of the knob and remove the3 screws. I've printed it in PETG but it should also be printable in other…
3d Model of a "blockchain". inspired by the dilbert comic strip of the 4th of april 2018 http://dilbert.com/strip/2018-04-20 Best printed with supports, can not be disasembled after printing. Add individual links to the slicer to create…
multi color atlantic puffin key chain for printing on the MMU or a similar device. I printed it in PLA in white, black and yellow
Anvil Model, not too special :-D Just one of the things modeled to get used to fusion 360 Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill: 15%
Spool Roll for Prusa i3 MK2s, inspired by the spoll roll holder provided with the I3MK3 Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: Doesn't Matter Supports: Doesn't…
Can be printed in any Material / Resolution. The sample on the image is printed in dichromatic PLA with 0.35mm layer height. Allows to insert anti slip rubber bumpers of Ø 12mm and 3mm height. New: Added a TKL Version printed in a single…
A holder for up to 8 cross country poles. Ideally mounted to a wooden shelf. Printed best in a stiff material such as PLA. Prints without supports, but requires a printer with a large bed such as the Prusa XL. Onshape Link:…
Can be printed with a printer with multiple extruders or with an MMU unit. I printed it on my MK2.5s with MMU2
Clamping system for clamping stiff filaments to the frame of the prusa i3 mk2 printer Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.15…
The main part needs some tree supports in the twist lock hole. I prined it in PLA with 0.2mm layer height on the Prusa XL.
A decorative christmas star for tree or standalone decoration. Printable without supports in any general purpose material. The holes on the bottom allow to insert pieces of filament for alignment. See also my other christmas stars:
Can be printed in any suitable material such as PLA or PETG. I printed The inner part with PETG and the outer part with PLA. Supports are needed. I used PETG breakaway supports for the PLA and vice versa. A rubber band is needed for the…
Wrist rest ideally suited for usage with MX Mechanical, printable as one piece on Prusa XL or belt printer or as 2 parts for a Prusa i3 style printer. Contains variants that can be suited with Ø12x3mm silicone rubber feet. Link to the…
These are all currently available results.
