Counting matching models…
Now we have Darth Vader's lightsaber, this is a bit more designed after his hilt in episodes 4 and 5, the most noticeable difference in his RotJ hilt is the emitter shroud, so I included an extra piece designed after his RotJ shroud if…
The Darksaber! As seen and inspired by its appearance in The Mandalorian. I have previously made the Rebels appearance of this legendary lightsaber, but I have yet to tackle its live-action counterpart. When I approached the Rebels…
After I got my printer, the first thing I printed was Jacky Wan's lightsaber based off of Obi-Wan's saber from episode IV. Afterwards I wanted to print everyone's lightsaber hilt, but the selection was lacking, so about a year ago I…
Just in time for Star Wars Day! Anakin Skywalker's Lightsaber, as wielded by Luke, Finn and Rey as well. This prop changes from movie to movie, so I've meshed together my favorite parts, mostly from Episodes 3,5 and 7, for this model. Be…
Count Dooku's Lightsaber! An interesting hilt to model and print for sure. There is a separate connector piece between the Emitter and Outer Grip so those two pieces could have a better print orientation. Personally, I printed the emitter…
Kylo Ren's Lightsaber! I designed this hilt with more of the overall form in mind rather than how it would be broken apart to paint because the finish is somewhat uniform except for some of the small exposed parts/greebles, but kept part…
Here's Luke Skywalker's lightsaber from Return of the Jedi! Be sure to print two of the triangular indicator pieces, those are very small prints, I would suggest printing them at the same time as some of the larger pieces to let them cool…
Rey's new lightsaber! This design features a simple mechanism in the top that allows you to rotate the Activation Gear and raise up the Emitter Teeth on top. In order to get the mechanism working, everything needs to be tightly glued…
The lightsaber of everyone's favorite green Jedi (sorry Kit Fisto): Yoda! Some parts are a bit small for obvious reasons but on the bright side, it is an adorable lightsaber. All of the STLs are in the orientation I printed them.…
The lightsaber of Darth Sidious! Be sure to print two of the Red/Green Button and two of the Red/Green Button Outers I printed the Upper Chamber and Outer Chamber with supports, and all of the STLs are in the orientation I printed them,…
The lightsaber of Darth Vader's secret apprentice! Star of the Force Unleashed! Galen Marek, codenamed Starkiller! I've had many people request this lightsaber and I've stuck to my guns that I would only do canon sabers outside of…
Anakin Skywalker's very first lightsaber! All of the STLs are in the orientation I printed them. Personally, I printed the Middle Chamber with support generated in Cura. The Silver Button is a very small part, I'd suggest printing that…
Just in time for Star Wars Day 2020! Cal Kestis' lightsaber from Jedi: Fallen Order! Integrating the mangled end of the saber was a challenge and a lot of fun. Personally I printed the Emitter Shrouds, Emitter C and Outer Chamber with…
Leia's lightsaber! I really love this hilt design, its evocative of the original trilogy sabers while retaining a regal look that only Leia could build. There's a lot of parts to this build because of all the alternating metals, but the…
The lightsaber of the Grand Inquisitor from the first season of Star Wars: Rebels! One side of the assembly is able to swing over to the other side just like in the show! Sadly, no rotating blades of death though. Be sure to print: 2…
Ahsoka Tano's lightsabers from Rebels! Both of them! The main body of the primary saber is both split into two parts as "Main Body Upper and Main Body Lower" and unsplit "Full Main Body" All of the STLs are in the orientation I printed…
Ahsoka Tano's Lightsabers from the Star Wars: Clone Wars animated series! Be sure to print 2 tabs for the main hilt. All of the STLs are in the orientation I printed them. Personally, I printed the tabs of the main saber and the Outer…
Tarre Vizsla's Darksaber! An ancient and unique lightsaber and symbol of power for the Mandalorians. Much like Kylo Ren's Lightsaber, I designed this hilt with more of the overall form in mind rather than how it would be broken apart to…
Asajj Ventress' Lightsaber! Another cool, curved design for Count Dooku's Sith apprentice. Be sure to print 5 of the Upper Grip Inserts and two of the Pommel Inserts Outer and Inner pieces. All of the STLs are in the orientation I printed…
The lightsaber of the Sith Lord, Darth Maul! As a double bladed saber, this is a pretty big print, you'll need to print: 2 Emitter C's 6 Emitter B's 2 Emitter A's 2 Outer Emitters 2 Inner Emitters 4 Transitions 2 Upper Chambers 4 Red…
The lightsaber of the Wookie youngling Gungi from the Clone Wars animated series! I've been looking for an excuse to use ZBrush somehow in the lightsabers and took the opportunity with this one to sculpt in the wood grain of the hilt. All…
The double-bladed lightsaber of the Jedi Temple Guards! All of the STLs are in the orientation I printed them, personally I printed the Upper and Lower Emitter Outers and Upper Emitter Inner with support generated in Cura. Be sure to…
The lightsabers of the legendary Jedi and Sith Lord, Revan! This includes both designs from Knights of the Old Republic and from The Old Republic. Each saber is labeled "TOR" and "KotOR" respectively. Be sure to print 4 of the Emitter…
Here's my model of Qui-Gon Jinn's Lightsaber. More pieces than I would like require supports and for some I have included files with support that I generated in Meshmixer as well as the base files if you want to make your own. The black…
Here's Obi-Wan Kenobi's Lightsaber from Episodes I & II. I tried to tighten up my tolerances a little with this one so let me know if you have any issues with fit. Be sure to print six of the Pommel Blocks for the bottom! View some…
Mace Windu's Lightsaber! This saber has a lot of parts and pieces but the result is worth it. It needs 10 Grip Inserts and 3 Lower Inserts. I printed the Emitter Upper upright with supports, and all of the STLs are in the orientation I…
Plo Koon's lightsaber! Strangely similar to Darth Maul's, this saber was originally attributed to Mace Windu in the Episode I visual dictionary, then used as a shared prop between several Jedi in episode II much like Ki-Adi Mundi's. I…
Good, good...it's Emperor Palpatine's Cane! There's surprisingly little canon or Legends material around this prop, but it looks cool so I modeled it and now you, yes you, can 3D print it if you so choose. There are six pieces total. Each…
The lightsaber of Jedi apprentice Ben Solo before his fall to the dark side. There wasn't a crystal clear visual in The Last Jedi but this derived from what we got! Obviously much like Kylo Ren's saber this is with more of the overall…
Here is Kanan Jarrus' Lightsaber! I have included Two versions of the Pommel: One with tunnel for a D-Ring and one without, personally I like to be able to stand the sabers up which the D-Ring prohibits in this case. Be sure to print five…
Originally designed for Asajj Ventress in what ultimately became an unproduced story arc for the Clone Wars animated series that was turned into a wonderful novel called Dark Disciple. It later somehow ended up in the hands of Darth Maul…
Chirrut Imwe's Staff! I've gone rogue, I wanted to do something for Rogue One and with no new lightsabers, Chirrut's staff was a great choice. This is a large print, measuring about 52 inches long, but it is straight forward. I did not…
The lightsaber of Kyle Katarn: hero of the Rebellion, Jedi Master and all around cool guy! Kyle is the star of the Dark Forces/Jedi Knight video Game series, and this saber made its debut as Kyle's personal lightsaber in Star Wars Jedi…
Another Star Wars day means another lightsaber! This time an incredibly obscure one. Originating from the short story "A Two-Edged Sword" first seen in Star Wars Insider magazine #85 in 2005 where a series of force sensitive clones were…
Finally! The lightsaber no one was clamoring for! Ki-Adi Mundi, the cone-headed, Cerean Jedi Master. For the most part this is a pretty straight forward print, but the On/Off Inner and Outer assembly is a little tricky. All of the STLs…
The lightsaber of the Wookie Jedi Burryaga from the High Republic! Like Avar Kriss' lightsaber, its only seen in books and comics with varying amounts of detail, so I got to put my own spin on it. All of the STLs are in the orientation…
Shaak Ti's lightsaber! This is another of the shared props from the prequels, so you can find other Jedi wielding this hilt as well, most notably Adi Gallia. Be sure to print 2 silver buttons, 2 upper buttons 2 silver discs and 2 black…
Savage Oppress' Lightsaber! Silly name, cool lightsaber. Be sure to print two Transitions, Red Buttons and Silver Buttons. All of the STLs are in the orientation I printed them. Personally, I printed the Upper Emitter A with supports…
Ezra's first lightsaber! I had done his second, so of course I had to do the original in all of its hybrid saber/blaster glory! Personally I printed the guard with supports generated in Cura. All of the STLs are in the orientation I…
Avar Kriss hails from the High Republic era, currently only seen in books and comics. I really love this character and was excited to have some artistic license in bringing it to life. It's been described in books. It's been seen with…
Its finally here! Kirak Infil'a's lightsaber! Okay, I know this guy isn't the most well known, even among the Jedi after taking the Barash Vow, but he has a cool lightsaber and was even wielded, for a short time, by Darth Vader before…
A lightsaber of the High Republic, owned by Jedi Stellan Gios! I really love the aesthetic of the Jedi in the High Republic and I am happy to have brought this one to life. This one is a bit more of a project than usual, it has many more…
Of course I had to make the master's saber to go with the apprentice! A very long and mysterious lightsaber for a tall, mysterious force user. The Outer Insert require supports, all else printed without any. All of the STLs are in the…
And now for something completely different! Darth Maul's speeder from Episode I for 1:12 scale figures! Like my lightsaber models, this is split into separate parts for easier painting and realistic part lines. Each part is in the…
Ezra Bridger's latest lightsaber! All of the STLs are in the orientation I printed them. Personally, I printed the On/Off Outer, Inner Grip and Upper Emitter with support generated in Cura. Category: Props
The Dagger of Mortis from mystical planet Mortis featured in the Clone Wars! All of the STLs are in the orientation I printed them. Personally, I printed the Lower Blade, Middle Blade and Upper Blade with supports generated in Cura. The…
The saber cane of the elder Jedi Master Tera Sinube! I really like this character. How did he get that white lightsaber? Who'd he take that red crystal from? Is it actually just a really light blue? I hope we see more, but for now, you…
These are all currently available results.
