P
PrintablesKSchloe
Festool D27 Hose Clip
Just a simple Hose Clip for the D27 Festool hose. Category: DIY
- Downloads
- 2,821
- Likes
- 372
- Rating
- 5
All models
Counting matching models…
P
PrintablesKSchloe
Tentacle SyncE Mount
This is my version of a Tentecle Sync E Mount. You can use a flash mount thing or a standard 1/4 and 3/4 inch screw for mounting. The little things at the side provide pressure so the tentacle don't slip out of the cage. Fusion360 file is…
- Downloads
- 266
- Likes
- 20
- Rating
- 5
P
PrintablesKSchloe
Modulare Steckdosenhalterung / Modular Power Strip Holder
Modular Power Strip Holder. Fusion file attached - just change the draft to your likings and your are ready to go! Screwhole is for an M4 screw. Category: Electronics
- Downloads
- 253
- Likes
- 21
- Rating
- 5
P
PrintablesKSchloe
Neutrik D-Norm Color Coding Signing Plates
Custom Neutrik D-Norm color coding / signing plates. Liked this design much more than the original ones, because you can see much more color and have a place to put your sticker (max height 1cm) on to it. Category: Electronics
- Downloads
- 185
- Likes
- 18
- Rating
- 0
P
PrintablesKSchloe
Bosch Laser Holder French Cleat
Simple Holder for a bosch laser level. See the pictures for the measurements.
- Downloads
- 183
- Likes
- 46
- Rating
- 2
P
PrintablesKSchloe
Makita PJ7000J Lamello Festool Hose Absaug Adapter
Just a quick adapter to use with a standard festool hose. Works perfectly fine and has a snug fit. Category: DIY
- Downloads
- 133
- Likes
- 12
- Rating
- 5
P
PrintablesKSchloe
Bessey LM20 Clamp Pads
Clamping Pads for Bessey LM20 Clamps. Two versions - loose and tight fit. Print Settings Printer: FLsun Q5 Rafts: No Supports: Yes Resolution: 0.16 Infill: 100% Filament: SUNLU PLA Black Notes: Use String Supports, easier to cleanout.…
- Downloads
- 124
- Likes
- 19
- Rating
- 0
P
PrintablesKSchloe
Miele Staubsauger Vacuum Adapter
Just a little adapter for a normal Miele Vaccum with 34cm inner diameter. Category: DIY
- Downloads
- 101
- Likes
- 4
- Rating
- 5
P
PrintablesKSchloe
Festool D27 Hose & CTM MIDI to DN50/HT50 adapter
Two Adapters to connect the Festool D27 standard hose to a 50mm pipe system. Included files: D27 Hose to DN50/HT50 DN50/HT50 to CTM Midi Flansch / D27 Flansch Category: Hobby
- Downloads
- 92
- Likes
- 9
- Rating
- 0
P
PrintablesKSchloe
Workshop Sandpaper Holder Container French Cleat
Just a little holder/container box I use for storing sandpaper in my workshop. Prints perfectly fine in 0.2 without any supports (Bottom to Top). Use it for whatever you need to store in your workshop. There are 4mm screwholes to attach…
- Downloads
- 90
- Likes
- 26
- Rating
- 0
P
PrintablesKSchloe
Neutrik SCDR Abdeckkappe / Cover
Just a quick Neutri SCDR Remodel for "Home-Printing". Used Redline FLEX PLA. Feel free to customize - fusion file attached. ** Uploaded a second longer version with a bigger hole size for the cable.
- Downloads
- 76
- Likes
- 8
- Rating
- 0
P
PrintablesKSchloe
Panasonic PTZ Controller Knob
Replacement knob for our Panasonic AW RP-150 PTZ controller. It will probably be the same for the AW-RP60 also.
- Downloads
- 69
- Likes
- 3
- Rating
- 0
P
PrintablesKSchloe
Handrad M12 für Mutter oder Schraube
A handy and easy to handle handwheel that can be fitted with a scrw or nut M12. Works perfectly fine and is easy to print. Category: DIY
- Downloads
- 67
- Likes
- 4
- Rating
- 0
P
PrintablesKSchloe
DN100/HT100 to DN50/HT50 adapter
DN100/HT100 to DN50/HT50 adapter. Included a small spacer, if your DN100 port is not exactly 100mm. EDIT 16.02.2021 Reuploaded the files with better .stl's (more vertices). Now it's really a round thing! Category: Hobby
- Downloads
- 61
- Likes
- 11
- Rating
- 0
P
PrintablesKSchloe
Sortimo L-Boxx Raaco Box Corner Boxes
For a custom L-Boxx/Sortimo Box 136 Insert which a clever guy from aachen made, I designed boxes to fit in the corners of them, so they are not useless. There is a right one and a left one. You need two of each. Link to his ebay:…
- Downloads
- 59
- Likes
- 22
- Rating
- 0
P
PrintablesKSchloe
Mirka Deros 150mm Abranet Grinding Disk Holder
Designed this holder to fit within my cabinettery. It is 5cm deep and the 150mm sanding disks fit perfectly. Expanded the edge, so therefore, the disks have a better support inside the holder. My printed version hasn't this newly edge.…
- Downloads
- 57
- Likes
- 15
- Rating
- 4
P
PrintablesKSchloe
Auer Packaging Sorting Grid
Designed a few sample parts for recreating the auer grid in a drawer. There are multiple sizes avaiable. If you want to recreate a 30x40 box you need following parts: Filler >> x2 Filler1 >> x1 MidFiller >> x3 Middle Grid >> x4 Side >> x2…
- Downloads
- 50
- Likes
- 5
- Rating
- 0
P
PrintablesKSchloe
Scheppach OSM600 Hose Absaug Adapter DN50/HT50
For my Scheppach OSM600 I needed a special angled adapter to fit in the corner of my shop. Therefore I designed a hose adapter which fits on one side on the maschine and on the other to a standard DN50 / HT50 or 50mm Hose. Print without…
- Downloads
- 38
- Likes
- 3
- Rating
- 0
P
PrintablesKSchloe
Ablaufgitter Ablaufstutzen Hochbeet
Außendurchmesser Innen-Kreis: 40mm Außendurchmesser Schürze: 60mm Stärke Wand: 2mm Fusion Datei liegt bei. Wurde Designed für eine 44mm Bohrung, sodass die Teichfolie in das Loch eingeschlagen und vertackert werden kann. Der Ablauf wird…
- Downloads
- 35
- Likes
- 4
- Rating
- 0
P
PrintablesKSchloe
DN50/HT50 Cable Clip
Just a simple cable clip for ht50/dn50 (50mm) pipe. Works perfectly with cables less than 8mm diameter.
- Downloads
- 30
- Likes
- 9
- Rating
- 0
P
PrintablesKSchloe
Single 30° Neutrik Angle Adapter D-Type
Just a simple 30° Angle Adapter for a standard Neutrik Ethercon Port. In my case I needed a little stand to give the cable a little bit more room - but I think you could also just drill a little hole to feed the cable through. Feel free…
- Downloads
- 29
- Likes
- 2
- Rating
- 0
P
PrintablesKSchloe
FlexibleHose to DN50 Adapter
A simple little Adapter for the flexible Hose from Marius Hornberger. Link: https://www.thingiverse.com/thing:3283786 Liked this design and the rigidness. Make sure to print it with inner supports due to the steep curve. Category: DIY
- Downloads
- 27
- Likes
- 4
- Rating
- 0
P
PrintablesKSchloe
HT50/DN50 Double Clamp/Adapter
Just a simple doubble adapter for two DN50/HT50 pipes. Fits perfectly to this blast gate: https://www.thingiverse.com/thing:4382243 Category: Hobby
- Downloads
- 26
- Likes
- 12
- Rating
- 0
P
PrintablesKSchloe
DICTUM Bandsäge BS 270-10 Absaugapter auf 50mm
Gedruckt für die DICTUM Bandsäge BS 270-10 aus schwarzem Redline PLA. Die Absaugung oben am Blatt reicht vollkommen aus, im Bandsägenkörper an sich sauge ich gelegentlich von Hand aus. Alles als "Press-Fit" ausgelegt - passt also Spack…
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
PrintablesKSchloe
Auer Packaging 3x1 Insert Box Cap
Just a simple lid with a finger hole. Category: DIY
- Downloads
- 17
- Likes
- 4
- Rating
- 0
P
PrintablesKSchloe
Heimgart Microgreens Deckel/ Lid
Just a quick lid for the Heimgart Microgreens Seeder. Works perfetly fine! Two versions available - one with rounded courners and one without.
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesKSchloe
HT50 / DN50 Pipe Holder for flexibel hose
Simple Pipe Holder for a 50mm Pipe. Designed to fit the HT/DN50 Pipe Clamp you can find here: https://www.thingiverse.com/thing:4389245 Just use the same screws and nuts (M4). Works perfectly! Fusion Files included. Print Settings…
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
PrintablesKSchloe
Cymatic Audio UTrack24 Barel Plug Secure
This is a simple and easy way to fix your barel plug of your uTrack24 Cymatic Audio device permanent to your device. The issue of it sliding out due to vibrations get avoided. RJ45 cable fits right beneath. Designed to fit a ruthex M3…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesKSchloe
Sign Automated Dust Collection (OFF ON AUTO)
Just a quick and easy sign for an automated dust collection. Printed in two colors in one pass on my prusa i3 mk3s+ with redline filament. Category: DIY
- Downloads
- 6
- Likes
- 0
- Rating
- 0
These are all currently available results.