Counting matching models…
A little Cat Bank. There is a "Key" to play a little with the screw a beginning to make it turn easier. All Euro coins pass without problems, the slot is 2.55 x 27 mm. For a bigger slot size, you can upscale the prints in the slicer to…
After losing the drain plug of my karcher vacuum cleaner, I modeled one that I share with you here. I preferred to print it in PETG but I think PLA can be good too. In addition to the printed part you will need an 17x3mm O-ring to seal…
This model is a adaptor for fit a PC4 M6 coupler. Print take 12m in 0.15 layer height on a MK4. You can print this without support, I recommend PETG to print it.
I turned Groot's head into a piggy bank These dimensions are 95x86x126 No support needed for printing. There is a cavity in the head which reduces the interior volume but it was necessary for stability.
I've modeled a box for my silica gel, to close with four m3x16 screw and four nuts, They are stackable. Dimensions: 90x90x26mm (28.5mm with the screw on top) Printed in Prusament PETG so they can go in a deshydrator to dry the silica.…
I Designed this model inspired by https://www.pngegg.com/fr/png-yngwn . There are different models depending on the height of your door. (3.2 to 7.4mm) (4 to 9.4mm) ( 4.8 to 11mm) I printed it flat in PLA with 3 perimeters, 10% filling in…
My skimmer basket broke over time, so I modeled another one. The outer diameter is 165mm. It prints in two parts to avoid having to print support, you just need to glue the two parts together either with super glue, or simply by melting…
A small sign for a label to put a name for a plant Label dimensions 50x30mm Please leave a like if you like it and a post your make for Prusameters ;)
I wanted to be able to have my phone standing on the bedside table. So I modeled this model in order to be able to insert a wireless charger from spigen https://amzn.eu/d/fVVJL49 I recommend printing it in PETG so as not to have a problem…
I suggest you to print the part where the working lights are attached to the side, this will require support but the print will be much more solid with 3 perimeters and 20% infill. The part where the battery is inserted can be printed…
These are all currently available results.
