Counting matching models…
Have you ever had a pain in your neck or back after a working day spent in front of a laptop? I had… Two pieces of plastic made my workplace much more comfortable and convenient. And Mr Neck is happy now. Try and let me know your…
This is my version of Ender 3 V3 SE cooling upgrade to dual 5015 fans, 40mm silent hotend cooler and LED (optional). I decided to use 12V 4010 cooler due to was planning to connect LED to the same DC-DC step-down converter. To assemble…
This is a way to save the space on a desk and sort your docs by 3 categories. :) It is recommended to have a brim on as most likely it gonna pick up corners due to filament thermal expansion effect. Support creator here: PayPal me :)…
Small one can be used for height range: 64-140mm. Large support would cover 105-200mm. To assemble you will need Screw Outer part (small or large (AMD/NVidia/Steam/Blank) Inner part (small or big) flex (TPU/elastan) pad is optional layer…
You are very welcome to experiment with the first layer pattern. ‘Octagram spiral’ and ‘Hilbert curve’ are my favourites for this purpose. Printer settings: Filament: I recommend using PETG, ABS, PLA. Avoid Flexes as they will be very…
The box the drone comes in is too small and allows to carry it only w/o props mounted. Here is one box that allows you to: store carry use as a launch platform for this funny toy. See a video with it here . Printer settings: Filament:…
This one was designed to replace an ordinary 7A Pb battery in a PC UPC. Now: it holds much higher discharge current; has at least twice bigger capacity; you may charge these LiFePo4 setup with 15A current instead of Pb 0.7A; has less…
No supports, brim or raft. 0.2 mm layer height. The best result is expected if TPU/ elastan filament used. Support creator here: PayPal me :) Patreon
Print the model put some wine and orange peel into the jar attach the trap cap to the jar enjoy the reducement of flies population. They will be able to enter the jar but leaving it is kinda mission impossible In order to increase…
Printer settings: Filament: PETG Layer: 0.2-0.25mm Infill: NA Walls: 2 walls, 3 bottom Supports/rafts: not required [optional] fuzzy skin for 0.4 nozzle: contour, skin point distance 0.8mm, thikness 0.3mm I made a variation with a fuzzy…
To fix the board you will need 2 small screws. If you don't have any - use a hot glue ;) Lid and front face is to be super glued. Support creator here: PayPal me :) Patreon…
Cost efficient Bambu Lab P1S and P1P feet are intended to minimize vibrations of chasis to improve printing experience and reduce noise. Please pay attention to printer settings: Only flexible filaments. I used TPU A90 Perimeters…
Printer settings: Filament : PLA or PETG as they are non-toxic. For a lid try wood alike filament. It should look great. Layer height : for the first 5 mm 0.1mm height for a better overhangs quality and 0.2mm for the rest model. Infill :…
Wear it on a belt, pocket, bag or everywhere you feel it the most handy. A battery quick swap is here! No more lost moments due to fresh battery was buried deep in a bag. I used PETG as it is more flexible than PLA. But PLA should work…
I've printed the kit with PLA as it is stiffer then PETG. 6 perimeters and 6/6 top bottom walls. Try a 0.6mm outer perimeter width for better chamfers/fillets look. Once printed: apply M2 (3.2mm outer diameter) heat inserts using a…
A nightlight I made for my beloved wifey. We have 2 kids, hence here are 2 small consequences of our big love :))) LEDs and ‘LOVE’ are optional. Please see 4 basement options attached. If you are not good at soldering - that is not a…
Upgrade advantages: higher flow compared to the stock better flexible filament print quality better quality retracts faster hot end heat loooow noise hotend radiator cooling powerful dual 5015 printed part cooling. Honestly, this is…
Please use holes compensation in your slicer to reach a right grip of the bits. It should be tight enough and not loose. Layer height 0.14mm or less. 100% infill. No supports, rafts, brims etc. Support creator here: PayPal me :) Patreon
Brushes can be bought here . Installation guidance is also provided on AliE. It sounds reasonable to me to buy 10 brushes and print a holder yourself, hence I designed exact same model like on AliExpress. Or it is nice to have a chance to…
Printer settings: material: I recomend PETG/ABS/ASA. PLA is option also but it may suffer under the sun. walls: 4-4-4. layer height: 0.25mm. supports are not mandatory. It is adopted to non-supported print. Mouse ears depending on your…
Printer settings: Filament: PETG/PLA. Layer: 0.28+mm for quick print Infill: you decide. I set 15% for mine. Walls: 3 walls, 3 bottom, 4 top Supports/rafts: not required Support creator here: PayPal me :) Patreon
Support creator here: PayPal me :) Patreon
I love the original design but it could be installed only on a flat surface meantime I was looking for the one to hang on a tree branch in my parents garden. Here we go! :) no supports required. 0.2mm layers height for threads. The rest…
By default the cookie size is 45x45mm and 8mm thick. Kindly adjust size via scale in your slicer. Thickness can be also adjusted via scale - just ensure you unchecked uniform scale and each of dimensions (X-Y-Z) will be adjusted…
Please note that there are 2 parts you should use a hard filament (e.g. PLA) and 2 pads that I recommend to print with a flex filament (e.g. TPU/Elastan). Softer is better. Square flex pad should be glued to a main body. However, if you…
Support creator here: PayPal me :) Patreon
This is the Czech-Republic 68mm PG-75, a High-Explosive-Anti-Tank grenade model. I tried to make as less supports as possible. Hence made two screw connectors. Front tip can be printed in a different color. To assemble the model you will…
In a slicer, please pay attention to the bridges settings! Print as 2+ walls, no brim, no supports. Support creator here: PayPal me :) Patreon
Stones number: 9 Stones size: typical 23*170mm Support creator here: PayPal me :) Patreon
Support creator here: PayPal me :) Patreon
This is new design to store small staff separately all in one place. That might be screws, nuts, spacers, radio components etc. Print settings: Walls number: 3-3-3 Infill: 15% adaptive cubic Layer height: 0.25mm Line width: Outer=0.65mm…
Pay attentions to the bridges. The rest settings are up to you, I printed it w/o brim and supports. Support creator here: PayPal me :) Patreon
Print all three parts and assemble them all together. Add a drop of glue if needed (that depends on your printer tolerance) ;) Material: any you like black and white. Be aware hot cup will make PLA soften, hence PETG is better. Layer…
Bambu Lab P1 triple angle lid raiser. It gives you an opportunity to adjust an angle on how the lid will be opened as this may be required by materials you print and other conditions. I printed mine with zero layer top/bottom faces that…
I used TPU to have the hit power absorbed by this spoiler. Support creator here: PayPal me :) Patreon
2024 3D Printing Industry Awards trophy design. Support creator here: PayPal me :) Patreon
There are 2 threaded parts that allows you to combine colors and dispose drain water in a bottom one. Split them in a slicer into objects before printing. Printer settings: Filament: any except flex Layer: 0.2mm or adaptive for better…
I used this mount with 52mm ( size is important ) Maple Wireless Light 1S 5.8G Circular Polarization Lollipop VTX antenna fromm Ali. It should be printed of TPU A80 (A90 is also fine but harder) with only one support (see picture). The…
These are all currently available results.
