Counting matching models…
3 knock down targets for rubber band guns. May also work for airsoft bb's, but the targets are designed to fall over with very little force. For best results, mount the base down or add weight to it to help keep it stationary. If you…
Rod holder base/dock. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: Yes Resolution: .200 is what I used. Infill: 65% is what I used. Notes: I only used supports for the square locking lug inside the shaft…
Remington 597 magazine. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: Doesn't Matter Supports: Yes Resolution: .100 Infill: Your choice, I used 45% honeycomb Filament: Proto Pasta HTPLA CF Black CF Category: Sport &…
Just a simple snap into place knob that allows you to more precisely, and better control, your pressure release by hand. (replaces the need to use the lever) Note: Tolerances were designed around the use of ABS filament with a .4mm…
Please be aware that some websites, eBay accounts, and Amazon accounts are selling this print illegal and without my permission or attribution. This file is free for you to use for personal use, but please don't try to profit from my work…
Kayak Attachments Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: No Resolution: .100 is what I used. Infill: 65% is what I used. Notes: I made mine out of ABS. Category: Sport & Outdoors
"EXPERIMENTAL" extended magazine for the Chiappa M1-22. I modeled the magazine after the Seymour type III mags. (excluding the holes on the body) I don't really know what the holes were for on the carbine mags. I'm guessing drainage for…
The old holder finally broke on me, so I designed a new one that snaps on, is print in place, and rotates so I can't break it again...lol I made this out of Prusament PETG for the flexibility. PLA may work, but I didn't try it. PETG seems…
Tested and working, .327 caliber speed loader for the Ruger SP101. Material: PLA Requires super glue inside hex cap for the final assembly. Updated design, as of 6-22-25 No supports needed, easy assembly. STEP file included for mods. A…
Trunk divider for later model Ridgelines, These are rather large prints, so a large format printer may be necessary. STEP files included so you can mod to your liking. I've been running these for about a year now, and they have held up…
Simple, strong, easy to print rope tie down. I ran supports inside the hex holes. Just make sure you give yourself enough clearance to easily remove the supports. Takes (2) 5/16 bolts. (Designed for use with ABS tolerances.) Print…
I was plowing the snow the other day and noticed that my boots were slipping off the pedals a little bit from all the ice and snow. So I thought, "Those pedals sure would be nice if they had better grip!" So here it is, a simple snap on…
ER2 mods: Spyder threaded barrel adapter (not currently 100% compatible with all barrels), Buffer tube and mounts for AR style milspec butt stocks, new larger pump handle with integrated weaver rail, and a clamping feed neck. I also made…
Here's a quick way to add an M12 Battery to your DIY projects. No more spending hours in CAD, just use these step files to subtract the material and poof… M12 SOCKET! Keep in mind clearances when using these negatives. Make sure you leave…
This cover takes the Palette 3's bowden tube adapter and adds it to the MK3S+'s FS cover. Just take the locker out of the Palette version and put it in this one. You can print this in any orientation you'd like, but I printed it at an…
I wanted to make a stronger pad eye attachment for my cousins kayak, but wanted it to be printed easily. So I came up with this modular design, which allows you to swap between different attachments. I wanted the feet to be printed flat,…
I couldn't find a Dig Dug character on Thingiverse, so here he is. The model is very large. (140mm tall) So please use your slicer's ratio factors to resize the object to your liking. The different colored areas are recessed to aid in…
I wanted a way to put handles on the U.S. General mini toolbox, so I designed some, and then that turned into bins, and then that turned into divided bins, and then I added magnets… You know how it goes. I want to make a drawer for the…
Customizable sleeve for common house key. Check my pics of the key dimensions. I noticed a few keys I have require "slight" filing to get a better fit. Looks like there's a small variance between manufacturers. The top cover gets…
These are a direct replacement for the newer companion scales. Tested on my neon green companion. These new scales have the slots for the tweezers and the toothpick via Roxon, so that's also implemented here. You can print these as is, or…
Threaded nozzle tray for MK10 nozzles.
Trailsport embroidered cubby tray. Just a remix of Frank M's cubby tray for Honda Ridgeline. Original creator: https://www.printables.com/model/1044888-cu
This is a dash plug for the Red Arc Tow-Pro controller, but also included is the bare STEP file for the dash plug so you can design this around other switches. NOTE* I'm not sure which model Ridgelines use this style plug, I'm guessing…
Simple tool to assist in removing your keepers from your valve springs. (Used in conjunction with a C-clamp of proper length.) I printed this out of Alloy 910 so it would be wicked tough, and it worked great for me. I added a small 3mm…
This is a work in progress, I printed this using orange Prusament PETG. Some slight tweaking may be required. I needed to heat up and bend my print ever so slightly to get the wiper to mate in the correct position with the bed. I'm also…
Working with Darin_4139308 to perfect this mag, followups and updates will be posted as the project progresses. Stay tuned... 1/23/26 - We updated base plate (retainer) so it fits into the stock correctly. 2/17/26 - Seems to be working…
Update 2-24-18 I haven't had much time to work on this mag, but I did find out that trying to make .43 caliber (first-strike-like) rounds is going to be a pain with a standard .4mm nozzel. So instead, I think I'm going to try to make a…
NOTE I've noticed the newer usb cables have two little ribs for grip on the phone end. When I designed this dock, my old cable was perfectly smooth and didn't have these ribs. So when the cable went bad and I had to get another one, I…
If you own a John Deere 1 series TLB or FILB tractor and your like me, you find the seat belt setup frustrating and annoying. If you leave them up and tighten them down, you can't turn the seat around. But if you leave them loose, they…
Roxon Companion scale (clip side) that takes the 50mm long “Tortoise” brand “Firefly” ferro rods for the victorinox swiss army knife. Includes a small spring for retention so the rod fits smoothly and doesn't fall out. Must be printed at…
Replacement logo for the H120 stickers that we all know get destroyed over time. Back is recessed for double sided tape. (thickness of tape may vary) ZYLTECH Dark Green PLA (very close to JD green) ZYLTECH yellow PLA The base plate has…
I dropped my key fob one time and the retention switch broke, making my key fall out. I took it apart and printed this replacement. I printed this out of PLA CF and it's been holding up well over a year with no issues. I did have to file…
I made these to organize my Pnuematic/replica handgun collection to clear up and add some space. Pegs use socket head 1/4-20 bolts and nuts, so there's no worries about items falling off. Just pick your peg style, and add a socket head…
These are all currently available results.
