Counting matching models…
A real-size Han solo blaster Printing PLA filament: black, brown and gray printed @ 0.16mm print barrel and scope vertically using supports and external brim print other parts using your common sense :) (flat part down, using supports if…
Printing it's best printed on one of its faces, using a brim Remixing attached is the fusion 360 file if you want to play even further with it
If you need a different angle don't hesitate to reach out
printing 0,16mm layer height no supports use brims to maximize bed adhesion strength: I used a modifier to set a 60 strength on the upper part to strengthen the thread area
I printed it using a 0,16mm layer height to make the piece extra sturdy, increase the wall loops (6) and sparse infill (40)
Use lego technic pics (light gray) to connect them together. (they're cheap, I bought hundreds of them on https://www.brickowl.com/ ) Printing I used a 0,16mm layer height print by orienting one leg vertically to the print bed I tried…
This discrete stand is made to accommodate a 26mm lamp socket. Printing: print moon-globe-base print moon-globe-base-center-26.2mm print 3 x moon-globe-base-leg Assemble and use a drop of CA glue Feel free to contact me if you need…
Easy printing! no supports needed printed using standard 0.4mm nozzle (~6h)
This enclosure is a tight fit for your hdd, if you want to be sure the bottom part holds it properly, use an hdd screw How to print no supports needed printed using 16mm layer height
This Macintosh classic 2 computer toy buddy is the perfect companion for your desk ! I'll remind you how old and bulky computers could still be cute little things. I had such a blast creating this model using fusion 360. I went as far as…
Use lego technic pics (light gray) to connect them together. (they're cheap, I bought hundreds of them on https://www.brickowl.com/ ) Printing I used a 0,16mm layer height print by orienting one leg vertically to the print bed use a brim…
I've been obsessed with the cheese grater pattern and enjoyed the process of creating it using fusion 360. And it's fully parametric ! I'm happy to share the sources with you so you can tinker with it and use it in your projects. How to…
Easy way to fix 2 Hay Neon Tubes together
if you want a version for the magic keyboard without keypad, ping me, I can change the original file Printing advice print these parts vertically, flat side on the build plate, using supports and an outer brim
A hollow Tetrapod lamp for the geometry-loving nerds like me ! printing I recommend using a translucent filament filament but since the walls are very thin, any other light filament will work too printed at 0.16mm print tetrapod lamp.stl…
you can even slap some magnets in the back for extra stability
easy to print, no supports needed
These are all currently available results.
