Counting matching models…
Print details: Material: PLA Recommended layer height: 0.10mm Supports: yes Infill: 15% [Englilsh] https://www.thingiverse.com/thing:2635032 1:12_Kettenkrad model by compon I made a Remix of the following. -No need to paint by using 3…
[English] I use the SUNLU S1 filament dryer, but when changing filaments, the lid has no stopper and opens up to 180 degrees, so I have to support it by hand, which is a bit inconvenient. So, I made a stand that allows the lid to open to…
Feb 10, 2024 : STEP file added. -- Print details: Material: PLA, PETG, ABS, or any filament you like. I use Overture PETG Black. layer height: 0.20mm Supports: You only need support for the big hole. I recommend to use Paint-on supports.…
Print details: Material: PLA Printer: PRUSA i3 MK3S+ layer height: 0.20mm Supports: no Infill: 15% [English] The PTFE tube inserted in the hotend of the PRUSA i3 MK2.5S/MK3S/MK3S+ must be bevel-cut at both ends at 60 degrees. It is…
[English] It's a carnation-style artificial flower. You can print all parts without support. The flower consists of 3 parts considering the strength and ease of output. The stem penetrates the sepal and inserts into the petals. Please…
[English] I've tried various buffers and auto rewinders for MMU2S, and I finally found something satisfactory. That name is “Stronger Compact Spool Auto-Rewinder by rans”. It is great that it rewinds moderately, even if there is a lot of…
[English] When the laundry detergent in the gusseted bag was getting low, it was difficult to scrape it out with a spoon, so I made a spoon with a pointed tip using a 3D printer. It is much easier to use than the regular spoon I had been…
Print details: Material: CC3D PETG Light Gold layer height: 0.20mm Supports: No Infill: 15% [English] My friend recently got hooked on woodworking and started making mobile phone stands with built-in natural sound amplifier. Last week, he…
[English] I recently started using Octo-Pi to remotely monitor the printing process, and I wanted to be able to see the temperature inside the enclosure from the camera, so I rebuilt the thermo-hygrometer stand. It fits a 45mm diameter…
Print details: Material: PLA, PETG, ABS, or any filament you like. I use GNVTNTP Silk PLA Black. layer height: 0.20mm Supports: Not required Infill: 15% [English] I made a jig for adding a notch on a 5x30mm stainless steel shaft with an…
[English] This is a plastic bottle holder for Renault Kangoo 3. As is common in European cars, standard cup holders could not keep plastic bottles which are commonly sold in Japan, to stand. The each parts can be printed without any…
Print details: Material: Overture PETG Transparent layer height: 0.20mm Supports: No Infill: 15% [English] The pocket tissue papers in the stock were too much, I made a special case for use at home (in Japan, small tissue paper with…
Print details: Material: PLA, PETG, ABS, or any filament you like. I use RepRapper PETG White. layer height: 0.20mm Supports: Recomended Infill: 15% [English] I was enjoying 3D printing with SOVOL SV06 with Klipper, but since it got…
Print details: Material: TINMORRY Sparkly Red PLA Printer: PRUSA i3 MK3S+ layer height: 0.20mm Supports: YES Infill: 15% [English] Most Japanese supermarkets offer rolls of plastic bags for packing foods that might leak, but these bags…
Print details: Material: Polymaker PolyLitePETG-teal layer height: 0.20mm Supports: No Infill: 15% [English] I made a holder to prevent the Apple Watch from being remove from magnetic charging dock CHOETECH T313. Prepare a hair band for…
Print details: Material: Wood PLA(FlashForge) Printer: PRUSA i3 MK3S+ layer height: 0.20mm Supports: no Infill: 15% [English] I have several solar-powered wristwatches, but they often run out of battery power. So I made a wristwatch…
[English] I made a vertical stand for an LED desk lamp (LASTAR CM012) that I purchased from Amazon. I got the lamp to work on my kitchen table, so I store it every time I am finished working. The AC adapter can also be stowed in it.…
These are all currently available results.
