Counting matching models…
ESP32-WROOM-32U Based WiFi Repeater Utilizes the ESP32-WROOM-32U module for powerful WiFi repeating capabilities. Enhanced signal strength with an external antenna (IPEX connector) for optimal performance. Firmware based on ESP32 NAT…
It's simple, it's square, and it matches my brute phone stand perfectly! My Printing settings Printing time : 5h30 with a speed optimized profile 2 perimeters Variable infill: global 5%, and 15% between these heights :7.68mm-9.48mm /…
Hide and present your Easter eggs in an original way. You can put about 17 small eggs inside (3x2cm). Easy print in 3 hours depending your speed parameters. I printed it with 2 perimeters and 0.45mm line-width, 0.40mm nozzle. Layer-height…
Play as Cthulhu for your next board game. This model can easily be resized to fit your board game. Current size: 18mm width, 21.5mm height, 7mm thickness Easy to print in 15 minutes with a 100% infill. Enjoy ;-)
For Valentine's Day bring a little love into your bullet journal with this special stencil! This is a first prototype that can be improved, with your feedbacks ;-)
Remix of the Korg Volca stand by beejums . This simplified and slimmer version is enough to hold your Volca securely. Print 2 models and enjoy making music with a better viewing angle on your Volca ;-) 3D Printing settings used Prusament…
Printed in 2 colours for good contrast, black background and white logo. I used small magnets (11.60mm diameter, 3mm thickness). You can glue them on with super glue, but if the holes are a bit too small you can insert them with a hot…
In case of emergency, here is a small tag with your blood group, to keep close to you. Eight groups designed, choose the right one :-) 3D Printing To print the letters, you can change the color of your filament at height: 1.28mm…
Put some originality on your bike with these original valve caps. Designed for a Schrader valve. Update 18/09/22 You will find the V2 model (STL, 3MF, STEP) which has a reinforcement on the thread part. And it is more practical to screw…
A small capsule to store electronic resistors (or other secrets). Une petite capsule pour ranger des résistances électroniques (ou autres secrets). Length : 77mm Diameter : 20mm Print Settings Printer: Dagoma DiscoEasy200 Rafts: No…
The TS100 is very practical and popular, but I find it unwieldy as it is very thin, and comes without a stand to put it on during use. So here's a personal model that improves the grip of the soldering iron and allows it to be placed on…
A minimalist keychain with the iconic IBM logo. Un porte-clés minimaliste avec l’emblématique logo IBM. Print Settings Printer Brand: DAGOMA Printer: Discoeasy 200 Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: Chromatik…
A 8 faces dice with a binary system notation, to disrupt the game :-) 3D Printing settings Material: Prusament - PLA - Galaxy Black Infill: Grid 20% Brim: 5mm if you need a better bed adhesion Perimeters: 3 Model height: 33mm Print time:…
Small decorative caps to place on your Z axes. They fit over the top bolt. The 2-part design will allow you to design other models and change according to the mood of the day :-) Tested on an Artillery Genius V1, but I think it must be…
Useful & easy to print. You have 3 levels of intensity to colour in to remember the average water and light exposure requirements of your plant. Print time, 15min or 45min depending if you use ironing to have a smooth surface. Filament :…
Design of a small box to carry a portion of M&M's. (1 half pack, about 23g / ten+ M&M's, equivalent to about 15 grams of sugar). The cap has a screw thread for closing. Design d’une petite boîte pour transporter une portion de M&M’s. (1…
Daily Tool for Diabetics Little tool for diabetics under insulin (Type 1) to properly store needles and lancets in the package of daily medical use. Support for 6x BD Ultra-Fine Pen Needles and & Accu-Check FastClix Lancets (1 or 2).…
Here is a small size balcony pot for urban balconies. It is fixed with wire in the 2 holes provided (diameter 5mm). The bottom is well drained. I did not provide a cup. Voici une balconnière de petit format pour balcon urbain. Elle se…
I made an ink stamp representing my personal logo, to personalize my documents and letters. The stamp part must be printed with flexible filament. This element is then glued under the handle. J’ai réalisé un tampon encreur représentant…
A small pot and his holder for planting "zig zag cactus" cuttings. The design is inspired by this graphic plant (fishbone cactus, zig zag cactus, Epiphyllum anguliger). Pot diameter: 65mm Pot height: 90mm Print Settings Printer: Artillery…
Design of a small flower pot integrating a support for the Digoo DG-TRT1 sensor. Design d’un petit pot de fleurs intégrant un support pour le capteur Digoo DG-TRT1. Digoo DG-TRT1 : Banggood.com Digoo.com Print Settings Printer: Dagoma…
A simple and useful accessory to keep your small cables in place. Printed in PLA in less than 10 minutes, 100% infill.
Model to be printed vertically. 3 perimeters Line-width: 0.45mm (nozzle 0.40mm) Infill 0% Infill modifier on holes: 100% Ironing on top surface Printing time: 5 hours with a 0.28mm layer height
I made this keychain of my designer brand logotype. Print Settings Printer: Dagoma DiscoEasy200 Rafts: No **Supports:** No Resolution: 0.10mm **Infill:** 33% How I Designed This =================== I made it from my initial 2D logo…
A dock for storing your Electronic Cigarette Drippers (Atomizer, RDA). One version for a single Dripper, and another for 5. Suitable for Drippers with a maximum outer diameter of 24mm. Un dock pour ranger vos Drippers (Atomizer, RDA) de…
This model is a replacement for the complete rear housing of a generic wireless LED night light with motion detection, sold by various retailers on AliExpress, Temu and similar marketplaces. After the original night light was dropped, the…
These are all currently available results.
