Counting matching models…
inspired by the classic flight case corners, i made this cover to screw on boxes or cases. the outside measures 30x30x30mm wall thickness is 5mm hole diameter 4mm
This obviously needs to be completed with two ball bearings (22x8x7mm) and a few metal parts. Print with 100% infill (circular). The inner diameter of the seat for the bearings is 22,4mm, on my printer it comes out as a nice pressfit -…
slightly off topic, but still worth sharing, i thought. (let me know, if there is a website similar to printables, only for laser cutting or cnc stuff)
there are two versions for 6mm and 8mm dowels. why the different surfaces? - where i come from, you can by sheets in certain thicknesses (9/12/15/18/21/24mm). if your board thickness matches one of the surfaces, then you can hold the jig…
i had the problem of dust collecting in the slot of the slider, so after some time i could not close it anymore. so i made another slider with the 50mm hole and i cut of the pins of the original slider. now instead of opening and closing…
These are all currently available results.
