Counting matching models…
Simple coat hook mounted with two screws (ø3.5 mm, holes distance 20 mm) Update: Added bigger version of double coat hook and one single hook version. Both models have same holes positions and distance so they can be replaced using same…
Print your own rain gauge for measuring rainfall. Add some microcontroller like arduino or esp and you can gather and chart the daily rainfall in home automation system like OpenHAB or HomeAsisstant. Description There are three options…
See attached .3mf project for information how to print particular parts or print them all in one.
I created customisable model of desk cable grommet for custom diameter and height. Currently I publish here the ones for hole diameters: 30, 35, 50, 52, 55, 60, 64, 65, 68, 69, 70 and 76 mm and 18 mm desk If you need another dimension,…
I remodeled the bee feeder to fit to the honey glass (1 kg) with thread (TO82), put there more ‘islands’ (more than can be actually seen on photo → see model file) and thicker side so bees can stay there too. Upravil jsem napáječku, aby…
Adapters to various IBC output threads and sizes to 1" thread pipe so either ball valve or hose pipe can be attached.
This is the slim nozzle for Electrolux Ultrasilencer vacuum cleaner that uses special shape for accessories. Print instructions Print with brim as the object is tall with small print bed contact area.
I designed components for my greenhouse irrigation system. It fits regular 1/2" (13 mm) hose and 4.6 mm hose (tested on Gardena irrigation 4.6 mm hose). Dripper endpoints are adjustable so them allow to set the desired amount of water for…
English: Picture frame hanger for wooden frames without any hook. Designed to hold picture as close to wall as possible. Use small nails to fasten it to wooden frame. There is a mark in the middle of the hanger. Česky: Držák dřevěného…
I designed this vacuum cleaner inlet to fit hose from WD series to my AD series vacuum cleaner which is smaller in diameter (45 mm). I bought replacement hose Jolly for Kärcher WD vacuum cleaners (see the picture) and wanted to use it on…
Print without support with layer height ≤0.2 mm. I printed it with PETG and it fits the fitting perfectly. If you need 1" cap, take a look here: https://www.printables.com/model/281934-1-blind-cap
Rear bumper with custom hitch for my RC car I designed after the original broke during car crash.
Simple G1 blind cap / zátka na coulové šroubení
Print without supports. I printed mine from Prusament PETG Signal White. Use 4x25 mm screws (or 4.5x25 mm) screws.
Tiskněte z PETG, ASA nebo ABS. Na těsnící plochu nalepte kolečko gumy.
Print on side with supports (see attached project file for recommended print settings).
Measuring cups for kitchen use (sugar, flour, etc)
Tool for tightening/loosening the gardena connector in ground socket
EN I created this holder for toothbrushes for my kids who always mixed their toothbrushes. Now everyone have own ‘box’ with name initials. Inspired by IKEA Dragan tootbrushes holder I modeled with removable bottom that allows easier…
Replacement for broken nut. Cut rubber circle 64 mm in diameter (I used old bike tire tube) and place it in nut as seal. I put there additional flat steel circle to have really flat surface to seal it perfectly and to enforce nut top.…
These are all currently available results.
