Counting matching models…
Finally, a D20 you can print with reasonable quality without support material! This model is fully parametric and can be generated/changed using OpenSCAD. Parameters that can be changed include: Diameter Corner/edge rounding Font Depth of…
Inspired by https://www.thingiverse.com/thing:58969 and others These were designed to send in with a stool sample for a medical test. They are not particularly nice, detailed, symmetrical, or accurate, but they were good enough to quickly…
I go through quite a bit of filament and like to keep a stock of different colors and materials so I can match the filament to nearly any project. However, this gets cumbersome when you're storing filament in bins or stacks and have to…
Add-on for https://www.thingiverse.com/thing:4709792 This is a case for the mAT-705Plus tuner to allow you to attach it to the “Icom IC-705 cover V3” by basstoshawn. It uses similar mounting hardware to what you need for the handles,…
The case which comes with the Milwaukee 28-piece hole saw kit (part #49-22-4185), while excellent for portability, is not great for finding a particular size of hole saw in a workshop. I wanted something where each size of hole saw was…
Please note that these models are untested and are based on replacement parts which I acquired. You may have to adjust this model to get it to work. A very common problem with used Yaesu FT-857D ham radios is that the Select knob is…
Inspired by my collection of Modulex M20 bricks/tiles/plates Long out of production, the Modulex M20 system (originally produced by Lego) was sort of an idealized block system based on a cubic unit cell for use in professional modelling…
This is a protective and durable case for RFID key cards. This design came about when a much-used key card (which was kept on a shared keyring) kept having pieces break off of it from flexing during carrying and use. This case has served…
Replacement knob for a thumbturn switch on a lamp. Materials: I think this was printed in eSUN PLA+. You can leave off the bottom layers and just go straight to infill if you want to use an infill pattern for more visual interest.…
Have keys for multiple addresses? Generate a key fob with each address's house number on it. Have old cars? Label their keys with the model year. Apartment or hotel room keys? Label them! ...or pretty much anything else where you want to…
Just your basic building blocks in a few different sizes. Rounded corners so as to make them less painful to step on and safer to play with. Exponential sizes (20mm, 40mm, 80mm) for easier combining and stacking. Plated together for…
Collar stays (for searchability, they're sometimes called "picks", "shirt picks", "collar picks", etc.) for dress shirts. The little things that slide into the small pockets in dress shirt collars to keep them flat. Sure, you can buy…
Snap-in labelling for wire shelving such as Rubbermaid(R) HomeFree(TM) or FastTrack(R). If you have a wire shelving system like this installed, and you happen to be obsessed with labelling things like I am, then you need these. These…
I had a new flexible filament to test out and decided I needed a model that would show off the properties of TPU and TPE filaments a little better than what I was able to find elsewhere. Which resulted in this model, quickly thrown…
Nothing particularly complicated here. This is just a very simple guard for 25mm fans, to reduce the amount of filament stringies and debris which would otherwise be pulled into and accumulate on the fan. Materials: The pictured guard was…
Replacement for the Mickey Thompson MM-245 wheel hubcaps. Unfortunately, I lost the original description of this that had a parts list when YouMagine did their recent redesign. Basically, for each hubcap, you will need: Two very good…
This is an add-on module for bastosshawn's IC-705 case ( https://www.thingiverse.com/thing:4709792 ) which adds a slight backtilt to the radio and gives you a compartment to store a speaker/mic. It bolts onto the main case using similar…
Need a way to store, organize, and display your pocketwatches? Look no further. This is a customizable pocketwatch display/stand/holder/organizer, so you can both see and easily access your pocketwatches. There are openings in the back to…
This is a set of replacement parts which are compatible with the original vintage parts drawer organizers from Modulex/Lego. The housings have cutouts on the top and bottom for interlocking together with all three types of vintage…
Replica of the ribbon spools for a vintage Tom Thumb typewriter. (Please note that I have not actually printed these. My typewriter still has these intact. They are provided in the hopes that if someone is missing theirs or is trying to…
Inspired by inkjet printer manual alignment processes of the 90's This plate is designed to help those with a dual head printer align the offsets between them. The intended use is: Align as closely as you can through direct measurement.…
Direct replacement for the original rubber feet of a 1950's-era Tom Thumb typewriter by Western Stamping Company. There are two versions - an “accurate to original dimensions” one and an “easy-print” one. Use whichever one you're capable…
An organizer box for R8 collets for a Bridgeport (or compatible) mill. I've used this one now for several years and it works great. I printed this from (IIRC) Atomic Filament Silver PETG for the base and Atomic Filament Aqua Translucent…
This is an adjustment shim for the threaded post of the Little Giant 22-Pound Hanging Poultry Feeder to make the bottom gap smaller so it doesn't let as much feed out at a time, reducing spillage. Materials: 3DXTech Natural-color ASA. The…
Now you can use a mounting bracket intended for a pipe (such as the mounting brackets for the Ubiquiti PowerBeam series or other pipe-mounted antenna systems) on a 2x4 and preserve the ability to aim them. Print two of these and attach…
This was designed by request from my friend Mike. He wanted something that would allow him to carry multiple USB cell phone backup batteries on his belt, which resulted in this model. This is designed to hold four semi-rounded backup…
I got a used Nichols Electronics Digital II music box, but it was missing the knobs. These are replacement knobs based on the dimensions of the knobs I had on my Nichols Electronics Digital. You will need a printer capable of dual…
This charging stand was designed (by request) to hold up to six batteries so they can be charged in one place without having them laying all over the counter and without having the cables tangled quite as easily. It is designed for…
Modulex (originally from Lego) drawer systems came in at least three versions that I know of: Drawers housings with no feet, made of plywood Drawers with round rubber feet, made of particle board Drawers with long oval-shaped rubber feet,…
I had an HVAC register which was carrying noise through from other parts of the building. This was my solution for that. It is a hook system that you can thread through a piece of foam to be able to hang it from a ceiling-mounted…
This was designed for my personal use. If you choose to use this, use at your own risk. I cannot guarantee the effectiveness or safety of this object and take no responsibility for any injuries sustained from the use or misuse of this…
These are all currently available results.
