Counting matching models…
A shallow tray to store your TS100 soldering iron, up to 5 tips and various accessories below. The iron and tips can easily be removed by pressing down on one side. For Gridfinity by Zack Freedman .
Print solid. If your lines are thick enough, you can probably print this in vase mode.
This my take on the SMD Component Magazine. This version features DIN-Rail mount with printed flexure Press-fit lid to prevent accidents, can optionally be secured with a screw Easy one handed operation by pulling the protective foil…
This project modifies a Velux KLI 310 or similar remote control to integrate with home assistant. It replaces the back panel of the original remote, powers it from the wall, and can report state back to home assistant even if you press…
Use with this model . This widens the gap so you can secure thicker wires. Should work for 1.5-2.5mm thick wires, YMMV. No M3 or threaded insert versions, sorry.
A shallow tray to store your CNC Kitchen threaded insert soldering tips (V1). A user reported that the new version, which includes a new M2.5 tip, does not fit . Remixes welcome! The adapter can easily be removed by pressing down on one…
This model was designed for these tweezers off Amazon . Please measure your own tweezers before printing, they might not fit. For Gridfinity by Zack Freedman .
A shallow tray to store your iFixit precision bit driver in prime position for instant grabification. Pictured is an older revision of the ⅓ height version. For Gridfinity by Zack Freedman .
This is a mounting bracket for the Bigscreen Beyond Link Box . It's designed to (gently!) smush the link box against whatever surface you're screwing to, so don't tighten down too much! Hardware 4x 3x12mm countersunk screws Suggested…
A shallow tray to store your iFixit Mahi 1/4" Bit Driver in position for instant grabification. Pictured is an older revision of the ⅔ height version. The models have since been modified to increase tolerances in problem areas. For…
This is a 40x40 mm fan bracket for the Dell H200 HBA. It hooks around the top of the card and screws into a hole on the bottom. It isn't great, but it works better than zip ties. Hardware 5 M3x4mm heat-set inserts 4 M3x22mm or 12mm screws…
Angled base for a 35mm DIN rail, designed for my SMD Magazines . The base has many holes for heat-set inserts, pick the ones that line up best with your rail. You can probably get away with a printed rail, as long as the mounting holes…
This model was designed for these tools: deburring tool , hobby knife . The design of these tools is fairly ubiquitous, but please measure your own tools before printing as they might not fit. Pictured is an older revision of the ⅓ height…
These are all currently available results.
