Counting matching models…
This is a tool holder for Makita 18V tools. I have developed it on a normal holder. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment: Makita Logo upwards Legal information: This…
This is a battery holder for Einhell 18V batteries. I have developed it on a Einhell battery. Special feature: This holder uses the original locking mechanism of the Einhell battery. Secure hold. Material: PETG Layer: 0.2mm Nozzle: 0.4mm…
This is a battery holder for Makita 18V batteries. I have developed it on a normal battery. Special feature: This holder uses the original locking mechanism of the Makita battery. Secure hold. My recommendation for the print settings:…
This is a battery holder for Milwaukee 12V 2.0Ah batteries. I have developed it on an 2.0Ah battery. Special feature: This holder uses the original locking mechanism of the Milwaukee battery. Secure hold. Note: Does not fit for 4.0Ah…
ATTENTION: You need M3 threaded inserts with a length of 3mm and suitable M3 screws. Special feature: Optimized for 0.4 mm nozzles, without supports (but bridging). My recommendation for the print settings: Material: PLA Layer: 0.2mm…
This is a battery holder for Bosch Professional 18V batteries. I have developed it on a ProCore battery. Special feature: This holder uses the original locking mechanism of the Bosch battery. Secure hold. My recommendation for the print…
This is a battery holder for Einhell 18V batteries. I have developed it on a Einhell battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Einhell battery. Secure hold. Material: PETG Layer: 0.2mm…
GIRA System 55 Standard 2-Compartment Frame 00.002412 Solid Know Edition. The model has been revised. Current status: Version 2 My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment:…
GIRA System 55 Standard 1-Compartment Frame 00.002411 Solid Know Edition. The model has been revised. Current status: Version 2 My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment:…
Every design requires time and expertise. My print settings: Printing method: FDM (Fused Deposition Modeling) Material: PETG Layer height: 0.2 mm Nozzle: 0.4 mm Orientation: logo on the print bed Infill: 50% Wall thickness: 1.2 mm (3…
This is a battery holder for Milwaukee 12V 2.0Ah batteries. (Long Version) I have developed it on an 2.0Ah battery. Special feature: This holder uses the original locking mechanism of the Milwaukee battery. Secure hold. Note: Does not fit…
GIRA System 55 Standard Rocker 00.002966 Solid Know Edition. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Visible surface on print bed Legal information: This model is…
This is a battery holder for Bosch Professional 12V 2.0Ah batteries. I have developed it on an 2.0Ah Professional battery. Special feature: This holder uses the original locking mechanism of the Bosch battery. Secure hold. Note: Does not…
GIRA System 55 Standard 3-Compartment Frame 00.002413 Solid Know Edition. The model has been revised. Current status: Version 2 My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment:…
This is a battery box for AA batteries. Special feature: Veltins beer crate design. Stackable The “comfort” version is for easy removal of the batteries. The “big” version has 0,4 mm bigger holes. Use my test model to determine the right…
This is a battery box for AAA batteries. Special feature: Veltins beer crate design. Stackable The “comfort” version is for easy removal of the batteries. The “big” version has 0,4 mm bigger holes. Use my test model to determine the right…
This is a battery holder for Makita 10.8V batteries. I have developed it on a normal battery. Special feature: This holder uses the original locking mechanism of the Makita battery. Secure hold. My recommendation for the print settings:…
This is a battery holder for Makita 18V batteries. I have developed it on a normal battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Makita battery. Secure hold. My recommendation for the…
GIRA System 55 Standard Rocker 00.002966 Solid Know Light-Icon Edition. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Visible surface on print bed Legal information: This model…
This is a battery holder for Bosch Professional 12V 2.0Ah batteries. I have developed it on an 2.0Ah Professional battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Bosch battery. Secure hold.…
This is a battery holder for Bosch Professional 18V batteries. I have developed it on a ProCore battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Bosch battery. Secure hold. My recommendation…
GIRA System 55 Standard 4-Compartment Frame 00.002414 Solid Know Edition. The model has been revised. Current status: Version 2 My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment:…
This is a empty box for own ideas to use. Special feature: Veltins beer crate design. Stackable My recommendation for the print settings: Material: PLA Layer: 0.2mm Nozzle: 0.4mm Supports: Yes for the bottom edge and bridging Alignment:…
This is a battery holder for Makita 10.8V batteries. I have developed it on a normal battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Makita battery. Secure hold. My recommendation for the…
GIRA System 55 Standard 5-Compartment Frame 00.002415 Solid Know Edition. The model has been revised. Current status: Version 2 My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment:…
GIRA System 55 Standard 4x-Compartment Frame 00.002414x Solid Know Edition. The model has been revised. Current status: Version 2 My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment:…
These are DLRG letters in XXL. Material: PLA Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Front side on the print bed This is an artistic interpretation. This product is not from the manufacturer! With my printer settings, this…
I have created a “ First Layer Calibration Test ” for the most common print bed sizes. Load the file with the appropriate size into your slicer and then print like other models. You will then see where your printer still has problem…
GIRA System 55 Standard Rocker 00.002966 Solid Know Bell-Icon Edition. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Visible surface on print bed Legal information: This model…
This is a Wi-Fi key that can be equipped with a magnet and NFC chip. You can see the dimensions for the magnet and the NFC adhesive chip in the drawing. Printing must be paused to insert the magnet and the NFC chip. Material: PLA Layer:…
This is a wall holder for Philips Multigroom Shaver. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Like letter Legal information: This model is compatible with "Philips…
Important note: This model was created according to the publicly available drawing by Wiegand-Glas. All dimensions that were not on the drawing were freely estimated by me! My recommendation for the print settings: Material: - Layer: -…
GIRA System 55 Standard Rocker 00.002966 Solid Know Socket-Icon Edition. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Visible surface on print bed Legal information: This…
This stand is designed for storing Pril bottles upside down. Special feature: Flow grooves, logo and optimized printing time My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Like…
More Informationen Coming Soon. First Version! Material: PLA Nozzle: 0.4 mm Layer height: 0.2 mm Important information for disassembly: There are 2 screws under the 2 rubber feet that go towards the connections. Attention! Do not bend the…
Prototype Not Tested! GIRA Centralplate 3-compartment 2x different Solid Know Editions. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment: Visible surface on print bed Legal…
These are the 3D DLRG youth logo. Perfect for multicolorprinting. Material: PLA Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Back side on the print bed This is an artistic interpretation. This product is not from the manufacturer!…
Grand Theft Auto VI 3D Logo. My recommendation for the print settings: Material: PLA/PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Place the back side on the print bed Legal information: This is a free design variation. The…
Every design requires time and expertise. Please consider donating to our regional association in Westphalia. https://westfalen.dlrg.de/spenden/ Thank you. My print settings: Printing method: FDM (Fused Deposition Modeling) Material: PETG…
GIRA Centralplate 4-compartment 5x different Solid Know Editions. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Visible surface on print bed Legal information: This model is…
GIRA System 55 Standard Rocker 00.002966 Solid Know Line-Icon Edition. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Visible surface on print bed Legal information: This model…
My recommendation for the print settings: Material: PLA Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Logo front side up Legal information: This is a free design variant based on my own measurement results. The model is not licensed…
GIRA System 55 Standard Rocker 00.002966 Solid Know Wave-Surface Edition. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Visible surface on print bed Legal information: This…
This is a quick lock (A) for Yuneec Typhoon H Propeller. Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment: Same as installation direction. This product is not from the manufacturer! With my printer settings, this holder…
These are the 3D DLRG youth logo. Perfect for multicolorprinting. Material: PLA Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Back side on the print bed This is an artistic interpretation. This product is not from the manufacturer!…
This is a quick lock (B) for Yuneec Typhoon H Propeller. Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment: Same as installation direction. This product is not from the manufacturer! With my printer settings, this holder…
These are Eurowings Keychain. Material: PLA Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Flattened side onto the printing bed This is an artistic interpretation. This product is not from the manufacturer! With my printer settings,…
This gimbal mount for the Yuneec CGO3+ is a self-interpretation and serves as a spare part. Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment: Like font The brand logo is only used to identify the battery system. This…
This is a cookie cutter with sauerland logo. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Look at Cura picture Legal information: This is a free design variant based on my own…
Attention: (Prototype, please test and give feedback) This is a Lampshade Puller for Yuneec Typhoon H LED Cover. Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Like picture This product is not from the manufacturer!…
ATTENTION: You need M3 threaded inserts with a length of 3mm and suitable M3 screws. Special feature: Optimized for 0.4 mm nozzles, without supports. Advantages: Less weight, better accessibility to screws and nozzle, better cooling,…
I created this display for the Fitnessloft. Material: PLA Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Plate = text facing upwards / logo = logo view facing upwards This is an artistic interpretation. This product is not from the…
Attention: (Prototype, please test and give feedback) This is a Lampshade Puller for Yuneec H520E LED Cover. Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Like picture This product is not from the manufacturer! With my…
SP Connect Mount Pro Diameter Adapter 22,4 mm (Egret Unit) or 22,2 or 28,6 mm (others) My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.2mm (0.4mm) Supports: No Alignment: Text readable from the top Legal…
GIRA System 55 Standard Rocker 00.002966 Solid Know Braille-Icon Edition. I realize that blind people probably don't need a light, but you can use a switch like this for other things as well. However, as I don't know anyone affected, I'm…
This stand is designed for storing fit bottles upside down. Special feature: Flow grooves, logo and optimized printing time My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Like…
These are all currently available results.
