Counting matching models…
This is a cover case for Samsung Galaxy A25 without cutoff for volume and power button. I remixed the model from Johan Fuhri, I cover the big cutoff with two button for pressing the volume and power button. I don't use the fingerprint…
I lost the clip/pin of my xiaomi smart band 8 active, so I designed and printed a replacement part.
Glue or double-sided tape is needed for sticking it under your desktop . Could be printed in PLA without support. Update : I uploaded a new model with a C clamp for a mount without tape or glue. The clamp have an height of 80mm. If you…
Unofficial terrain footprint templates compatible with the Warhammer 40,000 11th Edition terrain rules. This project provides printable STL templates for the terrain area footprints specified in the official Warhammer 40,000 terrain…
A replacement clip/pin for the xiaomi smart band 9's strap. You need to print it at 0.12 layer height and thin walls enabled otherwise some feature will not print. Can be printed without support.
This is a simple plate to mount the sherpa mini extruder instead of the standard extruder. It can be printed in PLA, but if you often print in ABS or other materials that require a closed chamber it is best if printed in ABS, ASA and…
A simple ferrule for a crutch. The original piece I used for take the mesurament have an internal diameter of 19mm and have some “bump” for better gripping. I attach an .step file if you want to adapt this model for another model of crutch.
Adapter ring to convert a 32mm base to 40mm for Warhammer 40k. Includes a split version for models wider than a 32mm base, and a version with an internal groove to reduce material waste.
This is a case for the BTT PI 1.2 with the DC input exposed in case you need to power with the printer's psu.
Replacement cover for a 1997 Daihatsu Terios J100 Trunk Light. Is a little different from the original part - have fewer angled walls - but it fit without problems. I printed mine with translucent PETG 0.1 layer hight. It require only a…
A mount for the BTT Eddy Duo for the FlyingBear Ghost 6. It replace the rear cover of the stock fan duct. You need two brass heated insert M3x4 for mounting to the printer and some nut for locking the probe. The offset should be the…
Different movement tray formats for skirmish units in Warhammer Fantasy (8th and 9th edition). These trays are designed to help you organize and move your miniatures more easily on the battlefield. Available tray sizes: For 20mm bases:…
This Funnel was designed for make easy to refill the tank of the hydraulic oil because all of the older machines in the workshop where I work leaks oil like blood from a man sick of Ebola. With this funnel I can do the job myself, without…
A printable cover for the Essager bluetooth adapter found on aliexpress . I designed it for be printed with flexible filament like TPU. I used with adapter for using “old school” earphones inside a earmuff, but the plastic case is very…
One of the cup for the licence plate light was missing so I reverse engineered the remaning one for a replacement. I printed mine in transparent PETG without any support and in the orientation of the stl file. My car is a first series…
A mount for placing a Garmin Varia adapter on the frame under the seat on a DeRosa Merak 2025. It need some hardware: Garmin Varia mount (should be included in your garmin box or you can print one like this one ) Two M3x16 screw Two M3x12…
This is a replacement button cap for the original - and now discontinued - Elegoo Mercury Curing Box. The button use the sticker that protect the display, who is too much fragile, for covering the spring button on the motherboard. The…
This is a a replacement lock for a storage box for the Warhammer wargame. The storage box use two block lock and in mine one is missing and the other was cracked. So I took some measurement on the cracked one and printed two replacement…
I designed a small storage box/tray for the Toyota Traigo 480 forklift. The forklift only comes with a few cup holders and has no dedicated storage space for the operator. This box can hold keys, a remote, or other small items. To install…
Unit marker designed to help with positioning and alignment of square-based miniatures in ranked formations. Particularly useful for rank-and-file gameplay systems such as Warhammer Fantasy and 9th rulesets. This is a generic utility tool…
A simple ladder foot for a four step ladder from unknown brand. .f3d included if you need to adjust to your ladder.
This is a cover or mount for the optic Sensor Omron TL-W5MB1. Is used in some heavy idraulic press and the cutting oil used on that machine literally worn the plastic component of the sensors destroying or making brittle the plastic where…
I wanted to install a camera to my corexy 3d printer but at home I had only a cheap wansview webcam ( here the model if you want to check if is the same of your's ). The original chassis was huge with a stand cannot be used for a flat…
I created the Dwarf Zhufbar emblem as a slightly raised 3D design (just a few tenths of a millimeter) so it can be easily printed with a resin 3D printer. This emblem is perfect for adding detail to banners, shields, unit bases, or scenic…
A simple draining bucket designed for some Lidl food containers or Haribo containers, used for cleaning resin prints without risking spilling alcohol when retrieving the items from the bucket. It has been tested with the small round…
Since the USB port on my capture card broke because it was hanging from my PC, I designed a magnetic mount to provide some strain relief for the connector. I used 4 round magnets 8mmx2mm. It should fit a lot of generic video capture cards…
Un portachiavi con il logo del sito videoludico italiano videogamezone.eu
These are all currently available results.
