Counting matching models…
A makeshift battery holder for AAA batteries, that you can wire as required. No terminals or springs are required. The design incorporates a complaint mechanism, inspire by this design. Screw holes are included to fasten it to another…
A makeshift battery holder for 18650 batteries, that you can wire as required. No terminals or springs are required. The design incorporates a complaint mechanism, inspire by this design. Screw holes are included to fasten it to another…
Use this base as a mount for a second layer of gridfinity bins. Perfect for when you want to stack small bins on top of a large bin. A bed with good adhesion is recommended for this print. I had bed adhesion issues with a textured PEI…
Boat hook, 20mm, 25mm and 1" versions available. Models have 0.4mm tolerance, to fit over the pole, so 20mm pole has 20.4mm hole for pole. Best printed as solid (100% infill) at 45 degrees with supports for maximum strength. This avoids…
Small enclosure for Shelly uni. Has 2mm hole that you can use an M2 to fasten the Shelly to the enclosure. Lid snaps into place
Cable comb for sleeved corsair cable, may also work with cable mod cables, but I don't have one to test with. If there is other configs that anyone wants let me know.
Drains into sink, drip try is sloped to avoid pooling. Separates into 3 parts for easy cleaning (and printing). Supports are only required for the large overhanging beam (dish cloth holder) Can house up to 3 brushes, 3 sponges and a dish…
Holds 2x Stabilo Boss highlighters per Gridfinity bin. 3U and 6U heights available.
A makeshift battery holder for AA batteries, that you can wire as required. No terminals or springs are required. The design incorporates a compliant mechanism, inspire by this design. Screw holes are included to fasten it to another…
An ergonomic 2 piece handle for needle files. The screw cap allows for easy swapping of the file, while still retaining the file firmly in place. Multiple sizes available 2-5mm (diameter of file shaft). The sizes shown in the stl's…
2x3 Gridfinity bin to hold all the LTT bits. The bits are recessed into the bin so that another bin can stack on top without colliding with bits in the case. Additional files are provided to allow an extra 2mm depth in the bit slot if you…
2x1 Gridfinity with magnet holes and stacking lip. It has been design so that other bins may stack on top, even with nozzle accessories inside. 4U height is all that is required, but I have provided 6U also. Holds the following: 6x…
Best printed in PETG or TPU. PLA will work but is too brittle. Suitable for 75mm diameter cans.
Sick of spilling your morning coffee on your way to work? Download this print so that you no longer have to spill your coffee when you're following Max Verstappen around the corner on your way to work! This is an insert for the cup holder…
3x1 Gridfinity bin (6u height) to store up to 12 packets of Bambu thermal grease or lead screw lubricant. Designed to be fully stack-able. 6x2 magnet holes in bottom.
This container will fit inside a bambu spool. The original design allowed for good airflow, however this design has the center chamber blocked so the descant has more surface area to the air. No supports are required. The lid remains…
Please note this is designed for non assembled hotends. For fully assembled hot ends see tlm's other model . Model is a hybrid remix between 2 of tlm's models 3x2x6 Gridfinity bin includes cutouts for 6x2mm magnets and lips for stacking.…
This is an adapter to mount the moon lamp from pendant fitting Has 5mm holes to fasten into, works with 3 or fastener varieties. Outer diameter is 85mm Holes allow hot air to escape. Download the lamp itself from the original creator.…
Replacement thumbstick for PowerA Switch Controller
Holds up to 8 bed plates or spare sheet for the bed plates. The rear tab on the plate is orientated downwards. Align diagonally on print bed in slicer. Overlaps the priming lines, but it can be peeled away before the print starts, or…
No supports required for print. Will attached to a 75x75 or 100x100 VESA mount Sized for M4 bolts (3.9mm diameter mounting holes) Should fit bands up to 50mm thick.
2x2 Gridfiinity bin (6U height) to hold Wowstick and bits. Will hold the Wowstick vertically with a bit installed Made to fit all the regular sized bits and still be stackable (you'll have to find something else to do with the longs bits.…
Holds the 30cm Lodge cast iron pan up vertical
This is the a larger sized handle than the original. The blue handle is this version, black the original. An ergonomic 2 piece handle for needle files. The screw cap allows for easy swapping of the file, while still retaining the file…
Hex shaped planter with base. The seam between the base and pot is well hidden 3 or 4 parts, so easy printing with no supports. The floor pieces sit chamfer side down in the pot to hold the soil. You can use either the upper, lower or…
This is a replacement part for the quick disconnect of a 800mm Dewalt clamp. Print with 100% infill for best strength. Avoid printing in the orientation where the layer lines are the sheer point. Use CF Nylon for even more strength if you…
Adjusted holder size to fit Xiaomi electric precision screw driver (as seen in photos) Photo is of original bin (Xiaomi wowstick). Dimensions adjusted as seen in image.
Modular Rack for stacking items. The parts are modular so you can stack as high as you like. I designed it for tea carton, but you can use for whatever you like. There is a bottom piece, then another that will stack on repeatably. If you…
I wanted to adapt my Ecowitt temperature and humidity sensor so that it can fit in the AMS for my BambuLab X1C. This 3 part enclosure refits the electronica for the Ecowitt WH31/WN31 Temperature and humidity sensor. Dimensions are…
These are all currently available results.
