P
Printablestelepath
PS5 Controller Stand | Optimized | With logos
🟠 HOW TO PRINT Layer height: 0.25/ 0.2 or less Wall loops: 2 or 3 Infill: 10% or more (if you use PETG) , 15% or more (if you use PLA)
- Downloads
- 621
- Likes
- 33
- Rating
- 5
All models
Counting matching models…
P
Printablestelepath
Coaster coaster - Voronoi coasters
🟥 READ ME 🟥 If you're going to use these coasters for hot beverages , be sure to add enough top and bottoms shells, in order to make the model solid (like 100% infill) or use PETG, so the coasters won't warp. Diameter: 80mm Layer width:…
- Downloads
- 468
- Likes
- 53
- Rating
- 5
P
Printablestelepath
Heart-shaped cup for makeup brushes/pencils
An heart-shaped makeup/brushes/pen cup. It's 90mm tall. Need it shorter ? Ask me or cut it in your slicer with the specific function How to print Nozzle: 0.4 Layer height: 0.3 Perimeters: 2+ Brim: optional Fuzzy skin: recommended 🧡 Did…
- Downloads
- 135
- Likes
- 27
- Rating
- 0
P
Printablestelepath
ESPclock | Digital Clock v1.0
🚨THIS DESIGN IS NOW DISCONTINUED IN FAVOUR OF A NEW (and better) DESIGN 🚨 Check the new and updated design of this clock ⬇ https://makerworld.com/it/models/2405754-espclock-bold-digital-clock#profileId-2637281…
- Downloads
- 116
- Likes
- 15
- Rating
- 0
P
Printablestelepath
Huawei GT4 Stand | the Remixes
Layer height: 0.12 or 0.2 Supports: yes
- Downloads
- 109
- Likes
- 8
- Rating
- 4
P
Printablestelepath
Sharingan Keychain
🔴 NEW 🔴 Now the keychains can be printed upside down! - Open them in Orca Slicer, set filament change for the black part, then print them! ONLY 2 FILAMENT CHANGES NO MMU/AMS REQUIRED Layer height: 0.3 Perimeters: 1 Top and bottom shells: 3
- Downloads
- 101
- Likes
- 8
- Rating
- 0
P
Printablestelepath
Misfits coaster
If you're into punk rock, you surely know Misfits. This is my tribute to the band. Hope you'll like it. This coaster is designed to be printed with 2 colors. So choose your best ones! Diameter: 80mm Use it as a coaster or scale it and use…
- Downloads
- 97
- Likes
- 10
- Rating
- 0
P
Printablestelepath
"Diffusion" Coaster | Dual color
🟠 INSTRUCTIONS: Print the base Print the top Add some glue to the notches on the base Put it together Use it! 🔴 HOW TO PRINT Nozzle: 0.4 Layer height: 0.2 Wall loops: 1 use 100% infill or set top and bottom layer at 6+ 🧡 Did you like the…
- Downloads
- 60
- Likes
- 29
- Rating
- 5
P
Printablestelepath
Jordan 1 Keychain
It can be printed with MMU/AMS/Manual filament change (a bit boring but it works😅) The first 3 layers are multicolor, the other ones just 1 color. 🔴 HOW TO PRINT Layer height: 0.25 Wall loops: 1 Top and bottom layers: 8+ 🟠 For a better…
- Downloads
- 48
- Likes
- 7
- Rating
- 0
P
Printablestelepath
Massive Attack Logo wall deco
My tribute to Massive Attack, a group that I love. The model is 19x19cm, but you can scale it. Hole diameter: 4mm How to print Nozzle: 0.4 Top/bottom infill: monotonic Infill: gyroid 20% Perimeters: 1 Brim: recommended Read me You don't…
- Downloads
- 41
- Likes
- 6
- Rating
- 0
P
Printablestelepath
Contour Tracer
This 5x5 cm square ruler is meant to duplicate countours in closed spaces with various offsets! You can use it with a pen/pencil/cutter The model is with or without a grip. The circular openings have diameter: 2mm The straight openings…
- Downloads
- 40
- Likes
- 12
- Rating
- 0
P
Printablestelepath
CMF Phone 2 Pro | Steering Wheel for Sim Racing
If you are a fan of Sim Racing games, you will surely love this Steering Wheel for CMF Phone 2 Pro! How To Print: Layer height: 0.25 Wall loops: 2 or more
- Downloads
- 39
- Likes
- 16
- Rating
- 0
P
Printablestelepath
KP3S PRO | Cam Support
Need to keep an eye on your 3d printer? With this small arm, you can easily add ESP32 camera (or any other thing you want) to your KP3S PRO, thanks to the modularity of the project! 🔴INSTRUCTIONS🔴 Choose you base Go to ESP32 camera case…
- Downloads
- 33
- Likes
- 6
- Rating
- 0
These are all currently available results.