All models

62 models

Bed cleaning tool

Printed PLA, 220c 80 mm a sec, slower at the nibs at the top, 3 walls, infill 15% lines.

Downloads: 1,766
Likes: 859
Rating: 4.87

Phat Bic Lighter Sleeve

.4 nozzle .2 layer height 6 layers top and bottom and 6 walls inside and out 30% infill, cubic, there is not much infill no supports I used super strong hairspray for good bed adherence.

Downloads: 488
Likes: 99
Rating: 5

Order a print of this model

Printablessensitivewoo

Taco Shell Holder

Top, bottom and walls 4, 30% infill.

Downloads: 270
Likes: 82
Rating: 0

Order a print of this model

Printablessensitivewoo

Creality dryer box bushing

This bushing prevents the bowdentube from being pulled into the dryer box when filament is being pulled by the extruder. Printed in TPU.

Downloads: 194
Likes: 27
Rating: 4.67

Order a print of this model

Printablessensitivewoo

Just wanted a easy and simple print for a disposable putty knife. Printer settings I used .4 nozzle 6 top and bottom layers, top concentric pattern and bottom concentric pattern 7 walls 25% infill cubic

Downloads: 152
Likes: 11
Rating: 5

Order a print of this model

Printablessensitivewoo

Wolf Coaster

6 walls, 6 top and bottom .2 layer height .4 nozzle 30% infill with triangles top fill pattern Monotonic Lines bottom fill pattern Concentric

Downloads: 151
Likes: 25
Rating: 5

Order a print of this model

Printablessensitivewoo

Soda Can Lid TPU

Simple sleek and easy to print. .2 layer height .4 nozzle I printed solid by upping the walls to 9 and top and bottom concentric layers to 6.

Downloads: 104
Likes: 19
Rating: 5

Order a print of this model

Printablessensitivewoo

Drill Dust Collector

Just thought I would take a try at a different design of a simple tool. This tool will catch the debris when you drill on a vertical surface.

Downloads: 94
Likes: 17
Rating: 0

Order a print of this model

Printablessensitivewoo

Kobra 2 Max screen cover remix

Great addition to my Kobra 2 Max. .2 layer height .4 nozzle no supports, just turn the layer speed up with lines

Downloads: 86
Likes: 11
Rating: 0

Order a print of this model

Printablessensitivewoo

Gargoyle Shot glass remix

Just made the interior of the glass cylindrical and smooth.

Downloads: 84
Likes: 13
Rating: 0

Order a print of this model

Printablessensitivewoo

Wire mount remix

Just resized about 250 % and added a dowel in the cap to hold and secure my TV wires.

Downloads: 78
Likes: 15
Rating: 0

Order a print of this model

Printablessensitivewoo

Garden Hose Washer

The washers dimensions are 25mm OD x 16 mm ID x 3mm thick I printed with TPU .2 mm layer height .4 nozzle solid by upping the line count

Downloads: 73
Likes: 23
Rating: 5

Order a print of this model

Printablessensitivewoo

Knob Driver

Small ¼ bit driver with 10x3 mm magnet inserted in the print. I made two versions, one solid and the other one with a TPU grip.

Downloads: 71
Likes: 19
Rating: 5

Order a print of this model

Printablessensitivewoo

Gnome flattened bottom

tips : Used 3DHOJOR Tri Color filiment, 220c, 80 mms and 40 mms outer walls, 3 walls, 15% infill lines pattern, no supports. Turned out great.

Downloads: 67
Likes: 25
Rating: 0

Order a print of this model

Printablessensitivewoo

Zippo Presenter Remix Gridfinity

Gridfinity Zippo lighter display and storage. .2 layer .4 nozzle 4 walls, top and bottom 30% infill triangles changed color right when Zippo started printing.

Downloads: 54
Likes: 11
Rating: 0

Order a print of this model

Printablessensitivewoo

USB & Micro SD card Gridfinity holder

Just another Gridfinity holder for USB drives and microsd cards.

Downloads: 50
Likes: 6
Rating: 5

Order a print of this model

Printablessensitivewoo

Egyptian Cat remix

printed with fuzzy skin .2mm skin thickness .4mm skin point distance layer height .2mm .4mm nozzle 30% infill cubic

Downloads: 49
Likes: 9
Rating: 0

Order a print of this model

Printablessensitivewoo

3D PRINTING ROOM SIGN

6 walls 5 top and bottom layers monotonic lines 30% infill cubic these setting worked for me you can set as desired

Downloads: 48
Likes: 10
Rating: 5

Order a print of this model

Printablessensitivewoo

Funnel 28 MM short spout

I made this funnel to fit my motorcycle, ZX14R, not hitting the clutch basket and with a bigger opening. I have used many variations using PLA and they work great. I used 3DHOJOR Filement, 210c, 6 lines w and top and bottom layers so it…

Downloads: 47
Likes: 9
Rating: 5

Order a print of this model

Printablessensitivewoo

Metric Tap Bin Gridfinity

I needed storage for my 9 piece metric bit set. .2 layer height .4 nozzle 30% infill triangle 6 top and bottom layers 7 walls

Downloads: 46
Likes: 6
Rating: 0

Order a print of this model

Printablessensitivewoo

Gridfinity scraper and blade holder

Did not take away from the original design, just patched it.

Downloads: 45
Likes: 17
Rating: 5

Order a print of this model

Printablessensitivewoo

Round cup

Printed in PLA, holds water, and TPU, weeps a little. .4 nozzle .2 layer height and printed solid upping the wall and top and bottom line count.

Downloads: 45
Likes: 9
Rating: 0

Order a print of this model

Printablessensitivewoo

Beefy Scraper Remix

Printed PLA, 60 mms, 6 walls, 6 top and bottom, printed with Beefy name down.

Downloads: 43
Likes: 8
Rating: 5

Order a print of this model

Printablessensitivewoo

Anycubic Spool Holder, short version, with bearings

Works really good, almost too good. tree supports on the main spool shaft, used PLA .2 layer height .4 nozzle 5 top, bottom, concentric, 5 walls 30% infill gyroid need 2 608 skateboard bearings

Downloads: 38
Likes: 1
Rating: 0

Order a print of this model

Printablessensitivewoo

Gridfinity 1x1 razor blade holder

just wanted a simple blade holder for my organization printed in petg .2 layer height .4 nozzle 30 % infill cubic 5 walls, 5 top and bottom layers

Downloads: 38
Likes: 4
Rating: 5

Order a print of this model

Printablessensitivewoo

5FDP Brass Nuckle Art remix

Tweaked the size, added a couple magnet holes and resized them. took off the texture and added a quote from the band. I included a blank text model so you can add you favorite band quote. Magnets are 10 X 3mm qty 5 .2 layer height .4…

Downloads: 37
Likes: 7
Rating: 0

Order a print of this model

Printablessensitivewoo

head phone holder

Made a head phone holder, one with Bose logo and one blank. Included a keyhole test piece and a hole template for the wall.

Downloads: 35
Likes: 7
Rating: 0

Order a print of this model

Printablessensitivewoo

Kawasaki Emblem Key Chain

was made with PLA and TPU 3 walls 3 top and bottom layers monotonic lines 30 % infill cubic .2 layerheight .4 nozzle

Downloads: 34
Likes: 3
Rating: 0

Order a print of this model

Printablessensitivewoo

Milwaukee sign remix

These colors really pop, you can always reverse the colors. .2 layer height .4 nozzle 4 walls 5 top and bottom layers, monotonic lines 30 % infill cubic

Downloads: 34
Likes: 14
Rating: 0

Order a print of this model

Printablessensitivewoo

BIT HOLDER MAGNETIZED

.2 layer height .4 nozzle 30 % infill cubic 5 top and bottom layers2 layer height .4 nozzle 30 % infill cubic 5 top and bottom layers 4 walls 3x10 magnet, lather up with glue stick when inserting 4 walls 3x10 magnet, lather up with glue…

Downloads: 33
Likes: 9
Rating: 0

Order a print of this model

Printablessensitivewoo

Phoenix Remix Coaster

Phoenix Coaster .2 layer height .4 nozzle 4 layers, top, bottom and walls 30% infill I changed color right when the Phoenix design starts.

Downloads: 32
Likes: 5
Rating: 0

Order a print of this model

Printablessensitivewoo

Post-it Caddy

Easy print, select your walls, infill, top and bottom and go. I did silk PLA at 220 c, 3 walls, 25% infill, 3 top and bottom layers.

Downloads: 30
Likes: 4
Rating: 0

Order a print of this model

Printablessensitivewoo

Gridfinity Volcano Nozzle Case

Created a small Gridfinity nozzle case with a snap lid.

Downloads: 30
Likes: 6
Rating: 5

Order a print of this model

Printablessensitivewoo

Gridfinity 1 x 1 nozzle box remix

Just needed a taller nozzle box and wanted to make a lid for it. Standard settings on my printer for silk pla and used standard supports on the lid.

Downloads: 30
Likes: 7
Rating: 0

Order a print of this model

Printablessensitivewoo

Aprilia Coaster remix

I found best slicer settings are .4 nozzle .2 layer height 30 % infill 4 walls and top and bottom layers, line pattern

Downloads: 30
Likes: 1
Rating: 0

Order a print of this model

Printablessensitivewoo

Tri Towel Holder

Just joined three together. Printed with cc3d silk white filament. .2 height .4 width 330c 6 wall lines which makes it almost solid until the top of the print 25% infill.

Downloads: 29
Likes: 9
Rating: 0

Order a print of this model

Printablessensitivewoo

Clip remix 45 tab

Just added a 45 to the tab on the classic clip

Downloads: 29
Likes: 5
Rating: 5

Order a print of this model

Printablessensitivewoo

Nibbed Texture Tile

Main purpose of this design was to create the texture. This could be used on the surface of other models, like boxes. Tile could be used as a non slip surface as well. I used standard pla settings and it worked well.

Downloads: 28
Likes: 8
Rating: 0

Order a print of this model

Printablessensitivewoo

Elephant remix

printed with fuzzy skin .2mm skin thickness .4mm skin point distance layer height .2mm .4mm nozzle 30% infill cubic organic supports

Downloads: 27
Likes: 3
Rating: 0

Order a print of this model

Printablessensitivewoo

Scifi Gridfinity 1x2 Box Short

I remixed this model. Just made the main body shorter.

Downloads: 27
Likes: 6
Rating: 0

Order a print of this model

Printablessensitivewoo

Decorative Fish Remix

If you drag stl into slicer resize 20%

Downloads: 27
Likes: 5
Rating: 0

Order a print of this model

Printablessensitivewoo

Gridfinity Hobby Knife Holder

I had four knives and blades that were just thrown in a drawer. Gridfinity to the rescue. 2X5X6 gridfinity size

Downloads: 26
Likes: 11
Rating: 5

Order a print of this model

Printablessensitivewoo

Pumpkiin remix

just printed in default pla settings and no supports.

Downloads: 24
Likes: 10
Rating: 5

Order a print of this model

Printablessensitivewoo

Paper Cutter tube case

Just wanted to store this tool in a safe place. There is an exposed blade.

Downloads: 23
Likes: 6
Rating: 0

Order a print of this model

Printablessensitivewoo

Flower Pot and Saucer

This model is scalable. I printed it with a standard pla profile except top and bottom layers are concentric, no supports.

Downloads: 21
Likes: 1
Rating: 0

Order a print of this model

Printablessensitivewoo

Happy Easter Coffee Stencil

I used 5 walls, top, and bottoms top and bottom layers monotonic lines infill 30% infill cubic

Downloads: 21
Likes: 2
Rating: 5

Order a print of this model

Printablessensitivewoo

Ryobi Wall Sign

What a way to display your most economical tool pride.

Downloads: 20
Likes: 5
Rating: 0

Order a print of this model

Printablessensitivewoo

KTM Coaster remix

I printed in TPU but PLA should be good as well. Changed colors at certain layers and you can use your slicer to determine where.

Downloads: 20
Likes: 8
Rating: 0

Order a print of this model

Printablessensitivewoo

Screw on funnel for silica gridfinity box

Simple screw on funnel. Printed silk filament at 225c with 6 walls to make it solid.

Downloads: 19
Likes: 8
Rating: 0

Order a print of this model

Printablessensitivewoo

Gridfinity Single Bottle

Great little bottle. Needed a short version to fit in a shallow drawer.

Downloads: 19
Likes: 4
Rating: 5

Order a print of this model

Printablessensitivewoo

GRIDFINITY MAGNETIZER TRAY 2X2

.2 layer height .4 nozzle 30% infill cubic pause print right before the magnet cavities get covered and use glue stick, top and bottom. need 4 qty 5x25 magnets

Downloads: 19
Likes: 2
Rating: 0

Order a print of this model

Printablessensitivewoo

Superman Bag Clip remix

Superman! I used silk filament. .2 layer height .4 nozzle 6 walls and top and bottom layers concentric

Downloads: 15
Likes: 3
Rating: 0

Order a print of this model

Printablessensitivewoo

Curved Magnetic Bowles

PLA works great for these bowls. Used a iron to press the magnets in with a dab of gorilla glue. Use them for organizing parts when I'm taking something apart or assembling something new. Love the magnets to store on the side of the…

Downloads: 15
Likes: 3
Rating: 0

Order a print of this model

Printablessensitivewoo

BOO

created a double sided tea light holder with a press fit for the letters. I used glow in the dark Overture filament. .4 nozzle, .2 layer height, 40 % infill, 3 walls, 5 bottom & 3 top layers.

Downloads: 13
Likes: 6
Rating: 0

Order a print of this model

Printablessensitivewoo

Don't piss off Superman Logger Benchy

Printed in standard PLA settings and slowed way down, about 50 mms.

Downloads: 11
Likes: 6
Rating: 0

Order a print of this model

Printablessensitivewoo

Thermo-Hygrometer Fridge Magnet Base

Print face down need 4 qty 10x3 magnets 4 top layers, monotonic lines, insert magnets 4 layers from the top, which is the legs since it is printing upside down, and smear glue stick on and around the sides of the cavity after inserting…

Downloads: 11
Likes: 1
Rating: 0

Order a print of this model

Printablessensitivewoo

Tweezer holder remix

Great model origanally, just filled the holes that went through to the magnet cavity

Downloads: 10
Likes: 4
Rating: 0

Order a print of this model

Printablessensitivewoo

Thermo-Hygrometer Desk Base

Just wanted a easy print for my hydrometer, 42mm hole printed solid just upping the walls, used silk PLA .2 layer height .4 nozzle no supports

Downloads: 9
Likes: 3
Rating: 5

Order a print of this model

Printablessensitivewoo

WOO Filiament Clip

Simple and useful spool filament clip. I printed solid with 4 walls, silk PLA 225c.

Downloads: 8
Likes: 1
Rating: 0

Order a print of this model

Printablessensitivewoo

THERMO-HYGROMETER MAGNET BASE

Print face down need 4 qty 10x3 magnets, I used glue stick on top and bottom when inserting them in the model 5 top and bottom layers, concentric 5 walls .2 layer height .4 nozzle 30% infill gyroid

Downloads: 8
Likes: 5
Rating: 0

Order a print of this model

Printablessensitivewoo

The Horse in the Rott

My dog is a horse. I printed with these settings perimeters, top, and bottom layers 5 30 % infill cubic .2 layer height .4 nozzle

Downloads: 5
Likes: 0
Rating: 0

Order a print of this model

Printablessensitivewoo

Lab series Gridfinity

Started off as a easy access small project parts tray and one of my dogs said wait a minute. I printed with PLA Silk at 235c .4 nozzle .2 layer height 3 top, bottom and perimiter layers 20 % infill cubic supports organic 17 overhang…

Downloads: 4
Likes: 0
Rating: 0

Order a print of this model

These are all currently available results.