Counting matching models…
Give me a Like 💗 Follow Me 😁🤗 Update 01.05.2024: Added rounded corners to 2 Models. I can't recommend it. If you have other ideas, feel free to change it, I Uploaded the Fusion 360 file. What you need: 1 x Tape 3M VHB 4910 ______…
Give me a Like 💗 Follow Me 😁🤗 Closet Hook Extension Closet Hook The hook has a 10mm hole. It comes in three thicknesses. You can simply attach the hook to the hanger and hang it. If you have other ideas, feel free to change it, I Uploaded…
Give me a Like 💗 Follow Me 😁🤗 The ghost keychain is cute and minimalist. It has soft, rounded edges and a friendly, playful aura. What you need: Keyring As an Amazon Associate, I earn from qualifying purchases.
Give me a Like 💗 Follow Me 😎😎 What you need: 1 x Tape 3M VHB 4910 2 x Magnet 5mm x 1.5mm Links: 3M VH B 4910 5mm x 1.5mm Magnet 5mm x 1.5mm Magnet 6mm x 1.5mm Magnet 6mm x 2mm Magnet 6mm x 3mm Magnet Update 20.04.2024: V4 I moved the…
Give me a Like 💗 Follow Me 😁🤗 Caulk Tube If you have other ideas, feel free to change it, I Uploaded the Fusion 360 file. As an Amazon Associate, I earn from qualifying purchases. Category: Tools
Filament: Soft TPU or Ninjaflex or Buy it on Aliexpress
Gingerbread man, inspired by a cookie cutter I just got from China. The first image is from the shop
Give me a Like 💗 Follow Me 😁🤗 40mm Bosch-Siemens = 5mm Hole 40mm Universal Slot Short = 5mm Slot 14mm Deep Universal Slot long = 5mm Slot 28mm Deep Features: The Vertical position is better to clean it. Very neat and organized. Compatible…
Give me a Like 💗 Follow Me 😁🤗 Balloon tie Tool. Don't expect to be faster just without the pain on the fingers. You are much faster than with this tool. I bought one and needed more, so I Made this. Amazon Aliexpress As an Amazon…
Servo arm round for 6mm shaft Servos . Use a Heatgun :) Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.1 Infill: 50 Category: 3D Printer Accessories
Cable Organizer/Management Give me a Like ❤ Features: Keep cords neat and organized, preventing tripping or mess. Easily clip cables with one hand, compatible with 70% of wires. Ideal for storing cords. Category: Organization
Work's with all 3 Ikea Helmer Variants. Sizes: 1x1 1x2 1x3 1x4 1x5 1x6 1x7 2x1 2x2 2x3 2x4 4x1 4x2 4x3 4x4 4x5 4x6 4x7
Thanks To SnappyFPV Just a Remix for 2s 3s 4s 5s & 6s JST-XH balance connectors. I didn't test them all please let me know if they work. Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 100 Category:…
I have made this Door_Closer for my Door. You need 2 x 608 bearings 1 x Cord 1 x Weight 8 x Nails [or Screws] Optional Glue for the Pin's Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 30% Notes: PLA…
Hi I made this to hold my phone. Samsung Galaxy Note 4 with 0.03 mm case. Version 2 with Qi Wireless Charging. https://www.thingiverse.com/thing:2885769 Print Settings Printer: Craftbot Plus Rafts: No Supports: Yes Resolution: 0.1 Infill:…
LMC Dometic Münsterland Lüftungsgitter Schraube. Category: Replacement Parts
Remix from Rejiggerer Give me a Like ❤ Follow Me 😁🤗 Changes: Added more sizes 18mm 45mm 80mm 100mm 120mm 150mm 200mm Category: Replacement Parts
SKS-Mudguard extention. Category: Sport & Outdoors
The Original Stand was too high and Heavy. I modify the Mini USB connector slightly to fit at an angle. :-P I have printed the Stand in two pieces and glued them together.…
This is the x5 version with edited pegs to fit 16 bottles in a row.
Replace your broken fan with a new one Category: Hobby
💗 Help Others 💗 Give me a Like Just a Remix to publish a Step file. Category: Hand Tools
Remix Original Designer Whitespace 💗 Features: 25.5mm x 25.5mm Mounting Space inside for RX and ESC Canopy, Still need to test the Canopy About ~87g Parts I used: Receiver TBS CROSSFIRE NANO RX ESC DYS XSD 7A BLheli_S Servo PES GH-S37A…
Give me a Like ❤ Follow Me 😁🤗 I have made 4 Sizes Normal : 70mm Middle: 100mm Large: 120mm ExtraLarge:150mm Print in ABS ASA PETG PP PC etc. Clean the Glass Surface with Acetone. Clean the Print with Isopropanol. Tape to use: 3M VHB 5952F…
This is a Heat Shrink dispenser. You can stack them using magnets. If you pull too much out you can retract it. I used a drill to wind them. Every corner got M2 Heat-Set Inserts and M2 screws. Screws 4mm Screws Set Brass inserts M2…
Just a remix of DonJorhe's work Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 40 Category: Organization
Bosch IXO Wallmount to save space on the desk. Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.3 Infill: 24 Notes: Infill-Type : 30 degree Post-Printing ============= Category: Organization
Aether UPS 5V 3A 15W Case with: 2 x USB-C 1 x XT30 Category: Containers
Fatshark HDO 2 Lens Cover :P Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.3 Infill: 15 Filament: Cheap TPU TPU Black Category: R/C Vehicles
Just a Remix. ;-) Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 10 Category: Organization
Heli Skid Clamp for a Align Trex 450 Pro. Just a copy of their idea. All Credits randomheli.com I printed them on the side and heated the top part with hot air and pushed it over the bottom part. Then heated it again to get back in shape.…
iFlight XT60 mount Category: R/C Vehicles
Remix Short nozzle 1mm Hole Use a Drill to make it bigger :-) Print Settings Printer: Craftbot Plus Rafts: Yes Supports: No Resolution: 0.2 Infill: 30 Filament: No Name PLA White Category: Tools
Made them for 3mm Panels and much more Clearance (~0.3-0.5mm)
Remixed FrSky Taranis RotorRiot Gimbal Protector by roobidesign Many people ask me to send them the files so here they are :) @milcent says it also fits very well with the Futaba 14SG. [THANKS] Print Settings Printer: Craftbot Plus Rafts:…
InfiRay Infisense P2 You need to buy a LENS Diameter: 20mm Focal Length: 101.6mm https://s.click.aliexpress.com/e/_Dm3yWGF Print Settings Printer: Voron Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Filament: No Name PLA ABS ASA…
Just caps for the hex drivers with numbers so you will know what size you got when you grab them :P. They all have different inner Sizes I made 2 Versions *Version 1 = 12.9mm Version 2 = 14mm* print them with a Pause at the 3rd Layer and…
Hi I made a new phoneholder for my Samsung Galaxy S8 Plus with Wireless Quick Charging. This Should also work for all Audis with the same Coinholder. Update: 18.01.2020 Uploaded Step files and Models you asked for. What you Need You can…
Mini Logitech C270 Case Open and Closed. How I Designed This Category: 3D Printer Accessories
This thing is that the housing doesn't get scratched and the light is dimmed. recommended transparent TPU.
Print the background in white the text in black and deal with it. Category: Signs & Logos
Universal key for Linde Forklift. NOT TESTED Print Settings Printer: Craftbot Plus Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Category: Keychains
Thank you Shawn Morrison ~ LetsFlyRC ♥ -- Changes: ● Reduced wall in front of antenna to 0.8mm ● FDM printable ● M2 Heat-Set Inserts ● Simplified What you need: 4x M2 Heatset insert 2x M2 20mm (or longer) 2x M2 16mm (or longer)…
InfiRay Infisense P2 Model Category: Camera
Thanks for the idea. This is a remix for Flexible coolant pipes. Coolant Hose Joint Thread 12.5mm: http://s.click.aliexpress.com/e/7233Vv3 Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 19 Notes: ABS…
SW6106 Board is Glued with B7000 (you need to file 2-3mm off the sides) Single Click Turn ON Double Click Turn OFF HOLD 5s Turn ON Long time You need 4 Screws M2 SW6106 Board Brass inserts M2 Print Settings Printer Brand: VoronDesign…
Sony MDR-RF895R Replacement Part. Category: Replacement Parts
This is a 2/3U height Ventilation Panel for 10" Rack Category: Electronics
Hyperlite Glide GPS SMA Mount. Category: R/C Vehicles
iFlight XL5 V5.1 Walksnail mount & Camera shim https://www.thingiverse.com/thing:5435127 thx :) Print Settings Printer: Voron Rafts: No Supports: No Resolution: 0.2 Filament: No Name TPU Neon Yellow Category: R/C Vehicles
This things Hold's the Buckle up when put it on your Bike. Print it in TPU. Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: Noname TPU Black Category: Sport & Outdoors
Buchse für Backofen Bosch Siemens 00068492 Befinden sich frontseitig rechts sowie links an den senkrechten Schienen der Backofenfront. Print Settings Printer: Voron V0.1 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: No Name…
Made a Grid for my Lipo's for Realacc Lipo Bag(220x155x115mm) http://bit.ly/2WyLXFx Print Settings Printer: Craftbot + Rafts: No Supports: No Resolution: 0.4 Infill: 25% Filament: NoName PETG Black Category: R/C Vehicles
TrueRC X-air Shell Category: R/C Vehicles
Fatshark button cap to prevent accidental pushed on the left joystick. Category: R/C Vehicles
Gimbal Protector for FrSky Taranis X-LITE. Please Test :). Category: R/C Vehicles
The Holder is 3mm thick and the hole is 4mm. Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 30% Category: Decor
Made this years ago for a friend. Batterydoor + Anti Battery drain. I don't know the exact Model number. Print Settings Printer: Craftbot + Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Noname PLA Black Category:…
a cover cap for the ikea helmer so that no small parts fall under it. I fixed it with double sided tape. Category: Containers
If you just need 1 more Strap Convert the one on the backpack. You can get the Original one here : Iflight Mount . Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: OWL-Filament PLA Black…
20° Print Settings Printer Brand: VoronDesign Printer: Voron 0 Rafts: No Supports: No Resolution: 0.2 Filament: NO NAME TPU Category: R/C Vehicles
Clip of the RPZ Mudguard. The original one was lost after a Crash. Print Settings Printer Brand: VoronDesign Printer: Voron 0 **Rafts:** Doesn't Matter Supports: Yes **Resolution:** 0.20 Infill: 20 **Filament:** noname PETG Black…
Update: Added a short version only 10mm,8mm,5mm Just a Holder for 10mm,8mm,5mm and 3mm Nozzle. Heat the PLA and screw the screws in :) Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.3 Infill: 19 Category: Tool…
Hyperlite Glide GPS DJI Caddx Vista antenna mount. Category: R/C Vehicles
Did this a while ago for a Friend. Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.3 Infill: 100 Filament: No Name TPU Black Category: R/C Vehicles
Deutsche Werke Tischaufsteller Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.3 Infill: 30 Filament: No Name PLA Black Notes: Use Cura and Ironing !!! Category: Signs & Logos
ImpulseRC Micro Alien antenna + Led mount Category: R/C Vehicles
Swift S41-20 addons Base.stl: is a Tray for screws with Magnets 5mm x 1.5mm Stopperr.stl: to Fix the X1 Lens. Gerade ding.stl: to Fix the arm Horizontal. Category: Tools
I made this corner-piece, because the Original one is too expensive. I only Printed the V1 with Brim and no Support. YOU have to shift the 35th Layer to not have much overhang. At this layer I put a fan in front of the print. Print…
Gatehunter X Arm Guards :P Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 1000 Filament: no name TPU Black Category: R/C Vehicles
Craftbot Plus Heatbed Knob Print it in ABS and put a nut inside. Print Settings Printer: Craftbot Plus Rafts: No Supports: Yes Resolution: 0.2 Infill: 30 Category: 3D Printer Parts
Aixun T3B with ports in the front and display angled. Category: Tools
The Hole is for a Screw or a piece of Filament. PRINT it in PP Polypropylen Print Settings Printer Brand: VoronDesign Printer: Voron 0 Rafts: No Supports: No Resolution: 0.1-0.2 Filament: No NAME PP Category: R/C Vehicles
This is a case for the AOK 150W 3in1 discarger. I printed it in ABS because the bulbs get hot. http://bit.ly/3rh6Umn Print Settings Printer: Craftbot + Rafts: No Supports: No Resolution: 0.3 Infill: 25% Filament: No Name ABS Black…
GoPro Session 5 Mount For Diatone GT - Tyrant 530 35° Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 30 Filament: TPU TPU Black Category: R/C Vehicles
ABS Filament + a nut in the hole Print Settings Printer: Craftbot Plus Rafts: No Supports: Yes Resolution: 0.2 Infill: 30 Notes: ABS Category: 3D Printer Parts
Update 03.05.2017 -added new TESTING soft mounts for diagonal FC mount. Tested and working with board thickness of 1.7mm. Soft-Mount_1.0mm = Very Soft Soft-Mount_1.3mm = Soft Soft-Mount_1.5mm = Soft Soft-Mount_1.8mm = Stiff…
Batterystrap Holder for Gatehunter X With:16mm Thick: 2 - 2.5mm Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: No name PETG TPU ABS Black Category: R/C Vehicles
Remixed for the Craftbot with CraftUnique logo. I used 5 mm Magnets, but you can glue also 8 mm Magnets. Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: 3D Printer Accessories
Proxxon Micromot FMZ Schraubstock thing to fix it Category: Machine Tools
Battery Lid for Winora Radar Urban. Category: Sport & Outdoors
Diatone 530 GPS + SMA Mount. Category: R/C Vehicles
This is a case for the AOK 150W 3in1 discarger. I printed it in ABS because the bulbs get hot. http://bit.ly/3rh6Umn This is a tight fit :) Print Settings Printer: Craftbot Plus Rafts: No Supports: Yes Resolution: 0.2 Infill: 19 Category:…
2 Mounts for F35 and Matek 405 mini Category: R/C Vehicles
These are all currently available results.
