Counting matching models…
Hollowed out the excellent model to make a slot car shell. Print Settings Printer: Ender3 Supports: No Resolution: 0.2 Infill: 25% Filament: Inland PLA White Category: Hobby
I took the body kit and remixed it to make a slot car shell by opening all of the holes. A motor plate and window buck are included, to make vac form windows. I would scale it to 58W X 125L x 29H (it's close but you should adjust in your…
The trailer has been shrunk for use with 1/32 slot cars as an old-style open trailer. I edited to move the guide flag slot further back so the car would sit correctly on the trailer. I flipped it upside down (trailer(1)) for less support…
I took the existing guide, lengthened the post, and made the blade slightly wider and deeper for use with wood tracks. You will have to shave a little for Carrera track, and much more for Ninco or Scalextric track. I generally print at…
Great kit....I just scaled it down to 84% to make it close to 1/32. Print all four files (print 4 wheels, or use your own). You will need motor, axles, tires, etc. Update 10 Feb 19: Narrowed the front axle mounts and rear wheel locations…
Shell of the Nissan 300ZX GTP with a sidewinder chassis from my own adjustable wheelbase design. Minor trimming may be needed depending on the print. I print the chassis at 100% for stiffness, and the body at 10%. I updated the…
This is a basic kit for a slot car. I took the shell, lightened it, removed the windscreen and made a buck for vacuforming the glass. I also provided a chassis based on my adjustable wheelbase chassis. It takes a standard pod, you could…
Update: I remeshed and thickened the body. I also integrated the rear panel, headlight covers, and mirrors. Should print better now. The original car looked cool so I reduced it to what I thought was about 1/32 scale. Made the body 1…
This is designed to be a sidewinder motor pod for1/32 slot cars. The bearings snap in. Some minor sanding may be necessary under the mounting points due to support removal. Update: I narrowed it slightly to help with mounting and…
This is a shell for an approximately 1/32 scale version of the 1968 Toyota 7 Group 7 racing car. A buck for a vacuform windscreen is included. Category: Hobby
I added a column for the steering wheel, laid it and the wheels flat for easier printing. Use wire, rod, plastic tube etc for axles. Meant to be approximately 1/32 scale for scenic use. Update 27 JUL 19 = Repaired the file, rebuilt the…
I used another great file from cole_funk and created a shell for a 1/32 slot car version of the Nissan R381 Group 7 race car. This one includes the wing and a windscreen buck. Category: Hobby
Another set of 12 mm inserts of varying depths. Category: Hobby
Took a beautiful, detailed model by Louisdioramas and hollowed it out to make a slot car body in 1/32 scale. It's a very small car, but a great model. Not sure if you can fit a chip in it for digital or not. Category: Hobby
I took an existing model of the Sunbeam and made a shell, and sized everything down to be close to 1/32. You can use the detail bits, and make a tray interior for a slot car. Category: Hobby
I took the original chassis, added a hinge, and freed up the entire center section. It should work like the original Cox Iso-fulcrum chassis design. Update 10 Feb 2019: Improved hinge design. Category: Hobby
I used gauderio's excellent model and made a 1/32 scale slot car shell. Edit: 28 Nov 2021 - Made some modifications. Added a splitter and air dam, some louvers, and cleaned up the file generally. Removed the mirrors, antenna, and roof…
My attempt to recreate the Artin dual wheelbase chassis. Two versions in the download. Choose endbell drive or can drive depending on what motor you are using. Bearings and motor should be glued in, this is not as tight as the originals.…
I took these nice wheels and stripped off everything but the spokes so I had an insert for blank wheels. It's sized for 12mm, but you can increase/decrease it easily enough. Category: Hobby
This is a shell for a well known Italian prototype racer from the late 60s. It's a thick version and should stand up to racing quite well. If you can thin out the shell, feel free to publish a lighter version. Category: Hobby
Interior plates for DIY slotcars. A basic plate with a dash and the seat tops and the driver. It's made to sit slightly below the height of the sides of the car, so adjust to fit each car. Category: Hobby
A driver bust with vintage goggles for tray interiors. Category: Hobby
Made a 12 mm insert out of the nice wheel model. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: No Resolution: 0.2 Infill: 100 Filament: Inland PLA NA Category: Hobby
A basic spoiler for the rear end of the 90s style NASCAR bodies, or a replacement for the COT style wing. Modeled in TinkerCAD, very basic. Category: Hobby
Remixed to make a Alfa Romeo looking insert. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: No Resolution: 0.2 Infill: 25% Filament: Inland PLA white Category: Hobby
Same as the sidewinder chassis, except the rear section is set for an inline motor pod. Edited to add the individual files for the front and middle sections. Delete the original from and middle sections and it's easier to adjust/assemble…
I took the original chassis and split it into three parts: Rear section 2) Mid section 3) Front section I added midline body mounts to the front and rear sections and opened the pod location slightly. I also added holes for front axle…
A set of classic 5 spoke American Racing mag inserts. There are two files. One with just the spokes, and one with the ring for the insert. Category: Hobby
This is a remix, shortened to fit many later Strombecker cars and modified to take an inline pod. Category: Hobby
A simple angled holder for trigger style controllers. Just screw it to the side of your track or driver's station and hand the controller by the trigger. Category: Hobby
A reproduction of the vintage Dynamic Models guide tongue for use with their motor carriers. There are two files, one for a short tongue and one for a double length long tongue. Print anywhere from 50% to 100% depending on your usage and…
These are all currently available results.
