Counting matching models…
To make the ski lift you first need to print all the parts. Print 8pcs of; “wheel-connect2”, wheel-connect1, wheel-connect3 Print 16pcs of “small-wheel” You can add som grease to make the small wheels spin better. You also need to use…
This is a 3d printable propeller for the Hobbyzone Sport Cub S V2. I find the plane going faster with my propeller than with the stock one. Print settings: No supports 0.10 layer height (Brim)
3d print a simple waterpump! This is a peristaltic waterpump with high pressure and low waterflow. I used it in a small automatic greenhouse where it connected to a spray nozzle. Hardware required: Yellow TT-motor (ideally low rpm and…
Print in TPU 0.2mm 15% infill 2 perimeters
Power it with a 12v power supply. I used an old computer charger. Parts list: 3D printed parts 80mm PC fan 4x M4x30 screws 4x M3x10 screws 12v 2.5mm DC barrel plug 25mm ID 30mm OD (1-inch?) tube Tube screw clamp 3x 8x3mm magnets If you…
My Build I started this project in the spring of 2026. It is documented on FoilZone: https://foil.zone/t/2x-budget-efoil-builds-from-sweden/26310 Included folders Board Assembly STEP – Main board assembly components 65161 Fliteprop…
Works best for batteries larger than 5000mAh. It can easily be shortened for smaller batteries.
These are all currently available results.
