Counting matching models…
Print this speed loader upside down without support. Use plenty of perimeters and infill to make is strong enough for its intended purpose. This design allows for easier loading of M&P Shield Plus 9mm magazines during long range days or…
This is a simple tool that lets you use a dial indicator from Harbor Freight to measure table saw runout. You'll need a 1/4" hex bot and nut to assemble it. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Inspired by my Yakattack rotogrip paddle holder, I designed up my own printable version. This in no way replaces the absolutely bulletproof gear from Yakattack, but it was a way for me to store my paddles on my kayak storage rack. I…
Simple 8" long model of a sit-on-top fishing kayak designed to set on a desk as a decoration. I revised this model so it is closer to being ready to print. I had to remove the milk crate from the previous model as I could not get it to…
Overview and Parts to Purchase When leaving or coming home on my motorcycle, I found it to be a bit of a hassle to dismount to open/close the garage door using the keypad. I purchased a Chamberlain key fob door opener, but it was always…
After a day of fishing, I always seem to end up with a bunch of hooks, jigs, and lures scattered around the floor of my kayak, in my cup holder, and elsewhere. I whipped this up in Fusion 360 to try to help solve this problem. The magnets…
This is a body and back plate to combine two of the Harbor Freight work lights that you can often get for free with a coupon. It uses the lens, LEDs, and screws from the original lights. I built this to film night fishing, but it could…
In preparation for a duck hunting trip, I needed a plug for a Browning Sweet 16 (A5). There didn't seem to be anything local for this, and they were simple anyway, so I just printed one. It fits under the magazine cap and limits the…
This is a simple holder for a 2 inch diameter challenge coin. I received one from Flitetest during their Edgewater Airpark funding and wanted to mount it to the wall where my quads/helicopters/planes hang. I used a piece of command strip…
I wanted a compact, low profile, camera adapter for my kayak. I modeled this up to based on Prestonf's Scotty male end adapter. It seems like it'll fit my needs perfectly. Print this part with no support material. The main Scotty adapter…
This is a small collection of things that I printed to make a kayak safety flag and light. It uses a fiberglass driveway marker found at most major hardware stores (1/4" long and comes in 4' and 6' versions. The Scotty mount was designed…
This is a simple adapter that allows for a paint pole to be coupled to a bike hook from the local hardware store (Lowe's, Home Depot, Walmart, etc. all sell these). Decoy retrieval hooks are at least $25 from what I've seen, so I made…
This was my attempt to make the lowest possible profile GoPro mount. It uses two threaded pieces to create an adjustable spacer between a GoPro tripod adapter and a Yakattack Mighty Bolt. Simply slide the whole thing onto the track,…
Printable control horns for use with the Flitetest mighty minis. They are modeled off the free plans provided at flitetest.com. Enjoy! Category: R/C Vehicles
Simple holders to make using DMT DiaSharp sharpening stones easier. The smaller one fits 0.8" x 4" (22mm x 101mm) sharpeners and the larger one fits 2" x 6" sharpeners (51mm x 153mm) sharpeners. This model includes space for a 1.5mm thick…
I remixed Earthwormchris's Wolfwhoop WT02 mount to have a 20 and 30 degree tilt. I also shrunk down the base so it'd fit in my little quads. A piece of Scotch mounting tape (VHB, UHB, etc.) holds them great. I also put a little dab of hot…
I got tired of constantly knocking my picks off my music stand, so decided to fix it with a 3D print. The keeper will hold 3 picks of varying thicknesses with a minimum of about 0.3mm. Since I sometimes use a capo, I added a keeper for it…
This is a simple replacement latch for Remington brand dog crates. It is designed to fit one of the smaller models, but could easily be scaled up for the larger crates. I printed it with light supports and it came out pretty well and…
Update - 10/31/2017 - V3 is available! It has a larger "neck hole" for the camera and much better battery support and retention (no velcro needed now!). I've also made the tinkercad file available here:…
This is a remix of Prax's adjustable mobius mount for KipK's tricopter design (brocopter). It allows the angle the mobius camera to be adjust while still keeping it isolated from vibration. No modifications are needed to the brocopter.…
This is just a basic exhaust plug for a Harley Davidson Street 750. Since the stock exhaust on the Street 750 is oval, this plug is directional. The top is indicated by "TOP" embossed on the side of the plug that should be toward the top.…
Just a simple model to keep a size 2 Xacto knife from rolling off the bench and sticking in the floor or my foot. Printed in TPU, it's a snug fit that stays put. Works great, and now I don't have to do a little dance every time my Xacto…
After getting a Spacemouse wireless, I realized that it did not come with any way to safely transport the mouse or USB receiver other than the original packaging. So, I designed one to be 3D printed. Right now I have it designed to accept…
This is a preliminary design of a cheap, lightweight FPV backpack. I wanted a system that was able to be carried by a variety of RC aircraft including my FT mini Scout and was also easy to assemble. Right now, this weighs in at 22g. It…
I remixed this design to be able to fit over 1/2" pine dowels used on my Flitetest Electrohub. They fit great and seem like they'll be quite strong. They use a standard 25mm x 25mm mounting hole spacing. Print Settings Printer: Davinci…
I bought a Feiyu Tech Mini 3D gimbal to mount to my electrohub. The mounting plate is designed to fit many commercially available quads, but does not match up with the camera rails on this multirotor. This plate matches up with the six M3…
A simple jig for drilling the mounting holes for the Flitetest Electrohub and fits 1/2 inch wooden dowels. The unmarked hole in the end should be drilled through regardless of the configuration of the copter. The X holes are for an X…
This thing fits the Hyperion 600TVL camera common used by Flitetest. I recently built the FT gremlin around the Josh Bixler frame. At first, I was using double-sided tape which worked, but wanted something a little better since the tape…
These are all currently available results.
