Counting matching models…
I made two doorplate versions of the Paw Patrol logo for my sons children's room. For a better printing I simplified the logo. Version 1 - MMU - 3D: Different heights of the color layers Version 2 - MMU - flat: A flat version, so you can…
I designed a cable box with snap fit and two 4 mm screw holes (in my case 3x12 TX10). Size: 70x40x20 mm A Make would be great. Happy printing... Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2…
I designed a wall mount for my SP-Connect+ iPhone-case. To put it at the wall it has two screw holes with bevel. Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Filament: PETG
I designed a spirit level holder to fit it on a wall. It has two 3mm screw holes for countersunk screws. It's designed for spirit level with a thickness of max. 21.5 mm. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No…
I remixed the hexagonal paper towel holder of Luke's 3D . I made twotone version with a KTM Logo an srew holes to mount it at a wall. @Luke: Thanks for sharing!! Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No…
I designed a T-connector to replace a broken original connector of my bestway frame pool. It's for the version with a sunshield. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: Yes Resolution: 0.2 Infill:…
I designed a wall mount for my SP-Connect iPhone-case. To put it at the wall it has two screw holes with bevel. Print Settings Printer Brand: Anycubic Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Filament: M4P PETG Grey
Update: Version 2 The dry boxes of my dealer ( Princore ) are sold out very often. So I decided to "remix" my own one. Therefor I designed a holder, a roll and a cleaner with a screw connection. The holder fits in a clip box (link below)…
This is a cover/grille for a pipe (diameter 125 mm). In my case it's responsible to get fresh air for my fireplace inside the house. To prevend having animals and dirt inside the pipe, I created this cover.
This is a remix of the case by Lorenz Nimmervoll. Thanks to him! My changes: adjusted size for ESP32 D1 Mini snap fit case ventilation in cover fixation of the Power Jack simplyfing inside for less supports/material only one hole for cables
I looked for a case for the RazBerry Modul with a fan, but I didn't found one. It was important for me, to have no screws so I changed the top of the case and the height to have enough space for the fan and the module. RaZberry Modul
I designed a cover for my trailer hitch ball. It's prepared for multimaterial print. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 15% Filament: Prusament PETG Black
This is a remix of the case by Lorenz Nimmervoll. Thanks to him! My changes: snap fit case ventilation in cover fixation of the Power Jack simplyfing inside for less supports/material only one hole for cables
I designed a battery wall mount for my 36V battery by Bosch. I looked for wall mounts to print, but for me they were too material intensive, so I created my own one. You can fix it at the wall with four screws (in my case 3x12 TX10).…
I designed a internal corner for a skirting board. The corner is made for skirting boards with a high of 57 mm and a depth of 15.5 mm. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No Resolution: 0.2…
I designed a fan cover for my enclosure of the 3D-printer. To avoid that the air flows direct to the printer I take the cover to change the flow direction. I use it together wit a Noctua 92 mm fan. Print Settings Printer Brand: Anycubic…
I designed a steering stem nut cover for a '21 Yamaha MT09 with the Yamaha logo on it. It's prepared for multimaterial print.
I remixed the wall mount, because I wanted to have two screw holes with a bevel, no text and round corners. Thanks to LICK_THE_BUTTER for the inital work. No supports needed!
I designed an external corner for a skirting board. It's for a skirting board with a height of 57 mm and a width of 18.5 mm. Advice: If you want to a few parts at the same time, I prefer to print it sequentiel to save time and avoid…
I designed a multicolor shield with the Yamaha Logo and the MT09 sign. It's prepared for multimaterial print. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No Resolution: 0.2 Filament: Prusament PETG White…
My daughter wants to have a "Lady Bug" doorplate, so I made a MMU version of it for her. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No Resolution: 0.2 Filament: Prusament PETG
I designed a twotone shift knob cover for my Volkswagen T5. It's prepared for multimaterial print (mmu). Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Filament: Prusament…
I needed a pipe mount for my selfie stick (Insta 360 X2 One). So I designed one for pipes with a diameter of 50 mm. It's prepared for two M3 Screws an nuts. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't Matter…
I designed a mirror plug with a R-logo for my KTM 1290 Super Duke R. You can cover the original thread. I also uploaded a version without the logo. Print Settings Printer Brand: Prusa Printer: i3 MK3S+ MMU 2 Rafts: No Supports: No…
I designed connectors for the tapes holder of Alberto in two sizes (150 & 200 mm). You can choose between two versions of connectors (honeycomb or full material). Depends on the weight of the tape. For heavier tape you can take my simple…
I designed a simple wall mount for my ear protectors. You can fix it with two screws (3x16 TX10). It was the target, that the protectors don't touch the wall. Printer brand: Prusa Printer: i3 MK3S+ MMU 2 Rafts: No Supports: No Resolution:…
I designed a WD40 can holder (diameter 54 mm) that can be mounted on a wall. It consists of two parts - bottom and top. Each part has a 3mm hole for countersunk screws. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No…
I designed a LED lamp for my daughter Lea. For the light I took a WS2812B LED strip and a ESP32 D1 Mini (NodeMCU) with the WLED firmware. This is the case I use for the ESP. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts:…
I designed a holder for the Apple siri remote (1st gen). The target was to have little material and a minimal design. There are two versions - one to fix with clue (in my case Tesa Powerstrips) and the other has two srew holes (e.g. 3x12…
I designed a wall mount for the Logitech K340 keyboard. There are a left and a right mount. Each of it has two 3mm screw holes for countersunk screws. You can choose between a version with or without the logitech logo (multi material).…
I designed a wall mount for the Knipex (12 40 200) wire stripper. It has two 3mm screw holes for countersunk screws. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament:…
Because of less space in the door frame I switchted sensor and magnet. Therefore I designed a raiser for the Shelly Door Window 2. It raises the magnet 26 mm. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports:…
I designed a wheather cover for a Gira door station AP. You can fix at the wall or a fence (double bar mat) when you use a mount for double bar mat ( LINK or in files). Print Settings Printer Brand: Prusa Printer: I3 MK3S+ Rafts: No…
A cover for the radial fan 5015 (Sunon) on a mk4 mod. Print Settings Printer Brand: Anycubic Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Filament: M4P PETG Orange
I designed a cable guide for an optimized heatbed with a new silicon mat (Princore). You can fix the cable at guide with help of two cable ties. Print Settings Printer Brand: Anycubic Rafts: No Supports: Yes Resolution: 0.2 Infill: 15%…
I designed a 45° end cap for a skirting board. The cap is made for skirting boards with a high of 57 mm and a depth of 15.5 mm. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No Resolution: 0.2 Infill: 15%…
I designed a holder for two folding rules. You can fit at on a wall. Therefore it has two 3mm screw holes for countersunk screws. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No Resolution: 0.2 Infill: 15%…
I designed a simple scraper wall mount with little material to print. The opening for the blade is 47 mm and 36 mm (small version) at its narrowest point. You can fix the wall mount with two screws (in my case 3x12 TX10). A make would be…
I designed a wall mount for my digital multimeter. It's a Hama EM393B ( Link ). There a two screw holes to fix it at a wall, a cable reel on the back and two holes on the side to plug in the two test prods. Print Settings Printer Brand:…
I designed a simple tape measure wall mount for my tool wall. The opening for the clip is 22 mm. It can be fixed with one srew (in my case 3x12 TX10). Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't Matter…
I designed a mount for a thermometer display wich you can click on the frame of an Anycubic i3 Mega S. The thermometer consists of a LCD display and a sensor. Both parts will be plug in to the mount. So no glue or tools are necessary. You…
I replicated the external corner for countertop plinth of Rehau. For better printing I have strengthened the holders. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Filament:…
I designed a bracket to merge angle bars in a corner. In my case it is for the enclosure of my 3D-Printer. I used 20x20 mm plastic angle bars in black. The brackets are fixed with countersunk screws. The screw holes are prepared. You can…
I have designed a wall hook for my office organizer. The organizer hangs only in the hook, so you can easily remove it. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament:…
To avoid scratches at the wall caused by the shoes, I designed a wall spacer fot the IKEA TJUSIG. Print Settings Printer Brand: Prusa Printer: i3 MK3S+ MMU 2 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Prusament PETG White
I designed a plate with the word GARAGE on it. It's prepared for multimaterial print. You can mount it on a double bar mat. I use it together with this design . Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament…
I designed a steering knuckle for my kids Jamara beetle. Both sides were broken, so I made a new left and right one. You need two new push-on cap nuts for repairing. A Make would be great. Happy printing... Print Settings Printer Brand:…
I designed a mount for the JBL Flip 4, to use it on the back of my display. Print Settings Printer Brand: Prusa Printer: i3 MK4S MMU3 Rafts: No Supports: No Resolution: 0.2 Infill: 20%
I designed a stand for the Telekom 5G receiver to use it without the wall mount. Print Settings Printer Brand: Prusa Printer: MK4S MMU3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20%
I designed a wall mount for my t-key set. It contains a t-key and five impact sockets (13, 12, 10, 8 mm and a bit adapter). It has two wholes with bevel to srew it at the wall. This is my T-key set: Link Print Settings Printer Brand:…
I designed a separator for the R5 eTech center console. I use it for the remote control by Hörmann. A make would be great. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: No Resolution: 0,2 Infill: 15%
These are all currently available results.
