Counting matching models…
This truck/bogey set can be printed out in multiple materials, snapped together without hardware or glue, and can use generic plastic or metal wheel & axle sets. The tongue on the crossframe has the tower with a hole through it to mount…
This truck/bogey set can be printed out in multiple materials, snapped together without hardware or glue, and can use generic plastic or metal wheel & axle sets. The tongue on the crossframe has the tower with a hole through it to mount…
Modeled in 1:8 scale and designed to fit the Prusa XL bed. Additional cutting of some parts will be necessary to fit smaller print volumes. Most components assembled with 2mm or 4mm bolts, some glue may be required for some of the…
This truck/bogey set can be printed out in multiple materials, snapped together without hardware or glue, and can use generic plastic or metal wheel & axle sets. There is enough side-play in the axle sets to allow it to navigate standard…
The model includes a built-in support so you don't have to slice with additional supports. The support arm comes off clean and the connector grips the original railing without sliding too freely. Printed in ABS, 0.2mm slicing with 0.4mm…
The Roomba S9 vacuums have a small, green, injection-molded piece in the corner for the side brush. This plastic piece had stripped out after several years of replacing the side brush. Rather than replace the whole side brush assembly I…
I modeled these pieces and printed them via SLA to reproduce the detail in a small scale that will fit on the original boardgame hex spaces. Once painted they make excellent replacements for the original injection molded copies of the…
This is a replacement clip for the player health indicator and danger level in the boardgames. Modeled to look the same as the original injection molded pieces. My pieces were printed in a standing orientation (pointing upwards) with no…
Very simple model of a music box enclosure, designed to fit one of the hand-crank music box movements inside with the crank handle sticking out through a hole. There are four small protrusions from the bottom to lift the box off the table…
The rear seat in 2006-2014 Ridgelines fold up with a cable system to retract the support legs. There is a plastic guide pulley in the center hinge that is prone to breaking. You can find these pulleys online for pretty cheap, but I didn't…
These are all currently available results.
