Counting matching models…
I made this dock for my Apple Watch Series 4 with 44mm and it fits like a charm. I also tested it out with the 40mm version (3rd image) and it also fitted very good. It also fits all other Apple Watches (also Ultra), cause the format…
I designed a 19 inch rackmount for my PiHole with the opportunity to use an 1.3 inch I2C-Screen. You need to print it with supports. If you want a screen and use it with PiHole, Id recommend using my script and instructions to get it to…
Works great with my other panels :)
This is the new version of my AirPods Pro dock and Apple Watch charger. Supports are only needed fot the parts that are touching buildplate. A layer height of 0.24 is recommended, you shouldn't go higher than that. I printed it with a…
Works great with my other rack-designs :)
I made this dock for my Apple Watch Series 4 with 44mm and it fits like a charm. I also tested it out with the 40mm version (3rd image) and it also fitted very good. It should also fit for all other Apple Watches, cause the format never…
Also looks good in combination with my Raspberry Pi Rackmount :)
I originally made it for a new fanduct, I designed for my Phaetus Dragon. You can find it in my prints :-) It fits a standard 4010 blower fan. Print time for me was about 1 hour.
Best Case is to print the feet in PETG (10% infill) and the undersides with TPU (at least 30% infill). Made it, so I can use my Bestas as cat toilets and my roomba can clean underneath. You'll need a seperate 30 or 35mm M8 screw, to screw…
Needed the thing because it was missing when I built my CADA Ferrari. Thought someone could need it :) you can download the .stl to print or the .ipa if you want to remix it in Inventor Print Settings Printer Brand: TEVO Printer:…
Did this for the valentines day contest, hope you like it :)
The images are from my first attempt, the stl and ipt are from my version 2 which is a bit more stable and every measurement should fit. You Can mount it directly on your 150W UniFi Switch. I guess other 8 Port Switches should work as…
You have to take the Wing off after that remove the caps with a screwdriver or knife then push the original disassembly tool inside the hole in the middle and then you should be able to take of the foot. The printed part should fit if…
Hello fellow makers, I made a fan duct for my Phaetus Dragon hotend, dual 4010 part cooling, BLTouch support which fits perfectly on the Ender 3 gantry. What you need: Phaetus Dragon Hotend 1 or 2 4010 Blowers 4010 cooler (1 used a…
Wanted to put Limit Switches to my laser. You need M3x5mm Screws for the switch and m3 or m4 screws and bolts (those that clamp themselves down in the profiles) for the profiles. Print Settings Printer Brand: TEVO Printer: Tarantula…
made them to hide the cables on my ProForge printer. I printed with 0.5mm width
Hello there, fellow TTP-owners! I made a few V-Slot Covers for the aluminium profiles. For the baseplate you need to print the following ammounts: 4x100 4x105 1x113_2 6x150 I also made those covers for the upper part of the printer. You…
I made a fan duct for short hotends fot the Tevo Tarantula Pro because I had very much problems with the original Volcano Nozzles. Since I have the short normal nozzles in my short hotend I haven´t got any problems with filament running…
Here you can find everything for your 20x20 and 40x20 profiles. I hope you like the design and it fits your needs! If you need longer or specific V-Slot covers, you can comment or download the .ipt-File to change it with Inventor >2020
I made this, because none of the ones I found, was like I wanted it.
Hello there, fellow TTP-owners! I made a few V-Slot Covers for the aluminium profiles. For the Z-Axis you need to print the following ammounts: 2x165 8x150 4x122 I also made those covers for the base plate of the printer. You can view…
You need to screw the two screws in first, remove one and screw it back in, when the tray is in place. Designed in Inventor.
Made this because all my tools were next to my soldering station and that annoyed me Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: [ Geeetech PLA…
These are all currently available results.
