Counting matching models…
Vase designed originally for the Flower Bouquet #10280. The added studs fit perfectly to normal lego bricks. The hole on the downside is for put in weight, it is made for 7x M10 Nuts. Settings: 4 Wall Lines 4 Bottom/Top Lines Infill: 20%…
Found this plan, print it and found there was some room for improvement, so I made my own one base on the general idea of it. The main improvement is that you can place this tray in the hole in the middle of the original part of the…
Very basic remote control holder for the Ikea Skadis. If you print it, and it works for you, please rate it, like it and post a make, that would be highly appreciated!
Small hanger to fix with a very small nails on the side of a Bror Ikea table to hang all the different cutting mate for the Cricut Maker 3. If using the STL file, print it on the side. No need for support, but I recommend to add brim. If…
Not my model, just an upload from here .
"Joyeux anniversaire" Cake Topper (Happy Birthday in French) with Leckerli One Font. Need to be printed with brim if you take the STL otherwise the risk it move is high. Also make some support for the small “spike”. Otherwise juste take…
Based on this plan . Make a new one, a bit longer and with a thicker gap to slide your MacBook Pro with his case protection on it. This is a MacBook Pro under the table rack. You use 2 screws per side to attach it under the desk so you…
Model of a Nespresso compatible capsule. No support needed. Helpfull to design stuff around it.
Print to hold and secure the 7 M10 nuts of the lego vase available here → https://www.printables.com/model/428565-vase-with-lego-studs. Printed with a 0.6 hotend and PLA, no support needed. 15% infill. You might want to “glue” it for more…
Adapter to put in between the Yoda head and your candida toothpaste tube. If you use the STL file, make sure to set/increase the X and Y axis to 17.5mm (keep the Z at 13mm). If you print it, and it works for you, please rate it and post a…
Similar to: https://www.prusaprinters.org/prints/49070-samla-hanga-modified-version but not totally the same. This one are for the 45L Samla box. Print one plan (it already contain the two holder, ready to print) and buy a 40mm diameter…
Coffee funnel for refillable Nespresso capsule. Help to not put coffee all around the kitchen in the morning! Very helpfull for me early in the morning when I'm not totally awake. If you print it, and it works for you, please rate it,…
Based on this carrots svg on Noonprojects , I've made a carrots sign to know where I've plant my seed in my raised garden on my balcony. Gcode is already setup as bi-color. If you print it, and it works for you, please rate it, like it…
Based on this paprika svg on Noonprojects , I've made a paprika sign to know where I've plant my seed in my raised garden on my balcony. Gcode is already setup as tri-color. 1st layer: Yellow / Red / Green 2nd layer: Green 3rd layer:…
Based on this corn on Noonproject , I've made a strawberry sign to know where I've plant my seed in my raised garden on my balcony. Gcode is already setup as four-color. 1st layer: Yellow 2nd layer: Green 3rd layer: Black If you print it,…
This custom-designed case is the perfect companion for your FairPhone 4's extra battery. It provides a sturdy yet elegant protective shell, ensuring your battery stays safe from short circuits and scratches. The sleek design makes it easy…
Watering Funnel that can be screw on standard PET bottles. V1 contain a lots of hole, I might do a V2 with less holes. If you print it, and it works for you, please rate it, like it and post a make, that would be highly appreciated!
Description: Introducing an innovative solution for pet lovers and organizers alike! These 3D-printed connectors are designed to enhance the flexibility of the Relaxdays shelving system. Originally crafted for a rabbit enclosure, these…
Print it with glowing PLA and it will help you to see and identify your partner under the water when it's very dark. Just point your light at it for a couple of minutes and it will shine bright and help you to see when it's dark out…
Coin organizer for the game 7 wonders duel. Contains holes to hold the 6, 3 and 1 coins as well as the progress tokens. If you print it, and it works for you, please rate it and post a make, that would be highly appreciated!
I printed this plan and realised it didn't fit my Withings scan watch, so I took the inspiration from the plan and designed my own stand. Made this plan , but it had some flaw so I create a new one which work perfectly! Its made of two…
Not claiming any ownership for this design. I found it on https://www.thingiverse.com/thing:2667241 Thought it would be nice to have it here on prusaPrinter. The picture is from me, and it's with a MacBook Pro 16" (2020 with the…
Based on this radish svg on Noonprojects , I've made a radish sign to know where I've plant my seed in my raised garden on my balcony. Gcode is already setup as bi-color. If you print it, and it works for you, please rate it, like it and…
Based on this strawberrie svg on Noonprojects , I've made a strawberry sign to know where I've plant my seed in my raised garden on my balcony. Gcode is already setup as four-color. Straberry_V2.STL /Straberries_0.2mm_PLA_MK3S_1h11m.gcode…
20mm world button, 2 colors. If you print it, and it works for you, please rate it and post a make, that would be highly appreciated!
Print it with glowing PLA and it will help you to see and identify your partner under the water when it's very dark. Just point your light at it for a couple of minutes and it will shine bright and help you to see when it's dark out…
Print with a brim to lock the piece in place. Otherwise there is chance it move. You can then fix the piece with one small nail at the top. If you print it, and it works for you, please rate it and post a make, that would be highly…
Magnetic LedClip for the Bror Ikea table. Magnet : Ø 4mm, 2.7mm height
Based on this fennel svg on Noonprojects , I've made a fennel sign to know where I've plant my seed in my raised garden on my balcony. Gcode is already setup as tri-color. 1st layer: Green 2nd layer: white 3rd layer: black If you print…
This holder is made to hold 1 Voopoo Doric e-cigaret, with 3 pods supports and 4 e-liquids 50ml supports. I use it in a drawer, and I was tired of having my bottles and stuff falling aside every time I was closing this drawer. That's why…
6 Chinese Stick Holder Minimalistic
If you print it, and it works for you, please rate it and post a make, that would be highly appreciated!
Extra pawns and coins for the " I Know! " game. Box contain only 6 pawns but you can be 7 playing and not enough coins. Really fun game, but we are often 7 players and there is only 6 pawns and not enough tokens to count the points (but…
Allow you to fit the 18650 battery in a torch lamp that usually takes the 26650 battery . With this, the battery is perfectly centered and there is no way it will move and stop working during your dive. If you print it, and it works for…
I printed this plan and realized it didn't fit my withings scan watch, so I took the inspiration from the plan and designed my own stand. If you print it, and it works for you, please rate it and post a make, that would be highly…
20mm Swiss button, 2 colors. Only print the big one from the STL file. If you print it, and it works for you, please rate it and post a make, that would be highly appreciated!
For a tight grip, print the STL file at 91.67% for the X and Y axis. (It's how it's configured on the G-CODE). If you print it, and it works for you, please rate it, like it and post a make, that would be highly appreciated!
I bought one of this remote controle on Aliexpress.com (the one on the left) to duplicate the remote I have for my garage door, and I wanted a support to hang it on my sunshield so here we are! ;) My car is a Skoda Fabia. The sunshield is…
This wristband extension is designed for Mares (and other models I'm sure) dive computers, adding 6 extra holes to easily adjust your strap when wearing a drysuit. It ensures a more secure fit of your dive computer around your wrist, even…
Loïc Cake Topper with Leckerli One Font. Need to be printed with brim if you take the STL otherwise the risk it move is high. Also make some support for the small “spike”. Otherwise juste take the gcode and you will be good! If you print…
Maximize your filament storage with this custom-designed intermediate support base tailored for the IKEA SKÅDIS pegboard system. This support base allows you to hold multiple spools at once, providing easy access and efficient storage.…
This Gravity Spool Holder Mount is designed to securely attach your "Gravity Spool Holder for MMU2S" ( https://www.printables.com/model/10370-gravity-spoolholder-for-mmu2s ) to an Ikea Lack table (…
These are all currently available results.
