Counting matching models…
Dad's birthday was coming up and I noticed that the word "DAD" kind of looks like glasses on a nose, so came up with the idea to turn the word into a glasses holder. I made a 2D mockup in Inkscape of the glasses to use as a template for…
Made the slits a bit thinner as the thread was coming loose on the original design. Made the hole smaller and moved it a bit as it was too close to the edge. v3 moved the hole a bit and made the design 0.5mm thick - and parameterised the…
There's plenty of short hex bit holders on here but no long ones for 100mm screwdriver bits, so I made this. It also served as an experiment into getting Fusion 360 threads to 3D print, as by default they won't work at all. In the end I…
Inspired by a video by clough42, I made a metric tap guide for M3.5-M12 taps. Each tap hole was sized based on Little Machine Shop's clearance data plus a 0.2mm adjustment, plus or minus a fraction of a millimetre based on my printer's…
Love the original but it was crying out to be re-jigged a bit to not require supports, so I split the nose off in Prusaslicer and made a new base in Fusion360 (source included). The nose can be printed flat side down and has a hole to…
The dual message and same-on-both-sides versions are published here, edit in OpenSCAD.
I got fed up of trying to hollow out the various T800 designs on here, so thought I'd remix this one. I've replaced the square LED's with 5mm round ones, which meant scaling the model down to 75% to make the eyes about 5.3mm I've made the…
A slight remix of lucibrandus' original - adding customizable text and aligned to the print platform. Provided Euro and Pound coin samples ready to print. Just insert in trolley and rotate left or right to remove. UPDATE: added v2 files -…
This is a case for the 2A Micro USB boost converters found all over AliExpress . The chip used is an MT3608 but the chip is marked as "B6286 (K)" I use mine to test my 12v projects from a 5v USB powerbank instead of firing up the bench…
Slight remix on slumou's design so that no supports are required. I think the original looks better but this should be an easier print and arguably more solid. Edit with OpenSCAD.
Most of the solder spool and sponge holders on here are for bare sponges, well I already have a nice metal sponge holder, so designed this to accommodate that and the huge 500g spool of leaded solder I just bought, and to ensure that it…
It will always leave the top most row square and not sliced along the diagonal like the lower rows. bottom should be set to the height of the lowest row, obviously smaller than zheight . It doesn't have to be square, you can set xlength…
I usually love OpenSCAD designs but the original just took too long to render when using $fn=100 to try to get a smoother surface. So I thought I'd challenge myself to remix it in Fusion360 and add a couple of things - a hole to hang it…
I remixed as I had a different set of countersinks from China: https://www.aliexpress.com/item/4000050405050.html I found that the hinge is a bit brittle (too tight) and the latch is too. Included Fusion360 source and an STL with some…
Mum needed something to stop her knocking over her nail polish when applying it. I can't knock this over no matter how hard I try. Most of her nail polish comes in square bottles, but I also made an (untested) round hole version too. Just…
The original was totally unprintable on my printer, largely due to the screw tabs floating in mid air and being printed with the right extruder then hit by the left one, but also the holes won't come out properly round if printed…
I bought some M6 cage nuts and bolts and they didn't come with any washers, usually with rackmount kit you get those deep washers that cover the sides of the bolts - well this is them! I also included some regular washers. Fusion 360…
Programmed with OpenSCAD Now copes with no SDHC slots properly - if you want to make it smaller (and just have microSD slots) then make sdhcZ and sdhcY the same as their microsdZ/Y equivalents.
The original print didn't contain the source F360 file, so to make the print faster (by removing half of the inside height) I used F360 to make a modifier for PrusaSlicer to use as a negative volume. If you wanted to you could use this to…
I needed a bumper (base) for the ICSP circuit I made on EasyEDA so I designed this. It has rounded outer corners and two notches along the inside to clamp the board down in the case so it won't move around. Don't forget to allow for legs…
These are all currently available results.
