Counting matching models…
Fits SuperLube 3 oz Silicone Lubricating Grease, model 92003. Features Long nozzle to apply a bead of grease along the leadscrew as well as making it easier to access hard to reach areas. Tight threads to eliminate leakage when applying…
Skadis compatible panel. Dimensions: 240 mm Wide x 120 mm High x 5 mm Thick. Other panel sizes available at https://www.printables.com/@HighDesertHacker/collections/2757420 Key features: Panels can be joined together to create a larger…
As this is a structural part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. Print on it's side or upright, with supports. More info at blog.outpost4.org. See related models at…
Print recommendations: as this is a structural part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. Print on it's side or upright, with supports. More info at blog.outpost4.org. See related…
Dimensions: 5.55" W x 4.5" T x 1.5" Print recommendations : Print on it's side. Enable supports if using the mounting holes. Assembly : Requires a non-slip surface to be attached to the top. Attach 1/4" thick neoprene to the top with…
Fits Whalen Industrial racks. 3/8" upper slot opening, 3.0" slot-slot spacing. Print recommendations: as this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50%+ infill wall overlap. Print on it's…
Fits 7/16" diameter upper hole and 1.5" hole-hole spacing. Print recommendations: as this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. 50+% infill for heavier items.…
120 mm long Akro mounting rail. Can join these together to make longer rails. Installation Requires two M2.5 Slot Connectors to be attached to this fixture. See https://www.printables.com/@HighDesertHacker/collections/2753370 Print…
As this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. Print on side. See other slatwall items at https://www.printables.com/@HighDesertHacker/collections/2835948 If it…
Requires two M4 heat set threaded inserts, 4-6.0 mm long. Mounting point hole separation is 2.0". As this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. Print standing on…
I put these in filament spools that are stored in my filament storage bins. (I use Ezy Storage 18L/19Qt Waterproof Clear Latch Totes, which hold 5 spools, are stackable, and seal well with silicone grease applied to the gasket.) These…
Print upright. Supports not necessary. If it works for you, please Like and post a Make with photo for others to see.
As this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. Print on side. See related slatwall models at https://www.printables.com/@HighDesertHacker/collections/1784497 If it…
5/8" x 18 tpi (fine thread) hex head bolts. Lengths: 1, 2, 3, 4 inches. I use these for jigs on a BuildPro welding table, as this is the dog hole size. Suitable for other low strength applications. See relateditems at…
See other slatwall items at https://www.printables.com/@HighDesertHacker/collections/2835948 If it works for you, please Like. A Make is always appreciated.
Interior Dimensions: 3.0" L x 2.0" W x 3.0" D Compatible with Akro hanging bin rails. See related items at https://www.printables.com/@HighDesertHacker/collections/2772311 Print standing up, with supports (for the hanger lip). More info…
More info at blog.outpost4.org. PM me for alternate sizes and formats.
Use with my 5"x4.25" slatwall adaptor or direct wall mount. If it works for you, please Like and post a Make for others to see.
Presta valve wrench for removal and installation of Presta valve core/stem. Compact, for storing in your bike kit. Dimensions: 35 mm L x 9.5 mm Dia. I print with >50% infill and 4 wall loops for strength. If it works for you, please Like…
These connectors attach to a Skadis accessory using simple mounting holes. I chose this approach for slot connections as it offers a number of advantages: It makes accessory design simpler - in most cases, accessories can be printed…
Base: For use with the ElectroCookie solderable protoboard as well as various clones. Amazon ASINs: B07ZV8FWM4, B08BWPGSSC, B09WZY8H3X Designed to be wall or surface mounted. Accommodates microcontrollers such as ESP32, Wemos D1 Mini,…
Print Recommendations - PETG. As this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. Print on side. See other slatwall items at…
Arca jaw for Yost model 455 5.5″ vise. For specs and complete build info, see https://blog.outpost4.org/arca-vise-jaws/. There are 2 models posted, with and without mounting holes. Mounting hole version is counterbored for 1/4" socket…
Print Recommendations: PETG, Infill: 20%, Supports off. If it works for you, please Like. A Make is always appreciated.
Tray can be wall mounted or attached to a Skadis panel. Installation - Skadis Mount Requires two M2.5 Slot Connectors. See https://www.printables.com/@HighDesertHacker/collections/2753370 Attach the Slot Connectors with M2.5 x 6+ mm e.g.…
Designed for mounting on a wall, or attach to slatwall with adapter. Can also stand on it's own. Dimensions: 3.5" L x 2.3" W x 3.9" T For slatwall mount, use my 3.25" slatwall adapter…
2 models provided. The larger size provides a more gradual taper, making it easier to spread the calipers. Use this if you have sufficient clearance or the calipers are removed from the mount. The short model works for limited clearance.…
If it works for you, please Like and post a Make for others to see.
See other slatwall items at https://www.printables.com/@HighDesertHacker/collections/2835948 If it works for you, please Like. A Make is always appreciated.
Skadis compatible panel. Dimensions: 240 mm Wide x 160 mm High x 5 mm Thick. See other panels at https://www.printables.com/@HighDesertHacker/collections/2757420 Key features: Panels can be joined together to create a larger area,…
If it works for you, please Like and post a Make for others to see.
Slatwall section for misc mounts. Use with my mount adaptor to use slatwall accessories on your BuildPro welding table. Print this vertically to print slots without supports. More info at blog.outpost4.org.
Designed for mounting on a wall, or attach to slatwall with adapter. Can also stand on it's own. Dimensions: 3.5" L x 2.3" W x 3.9" T For slatwall mount, use my 3.25" slatwall adapter…
Utility Sink Strainer. Fits common 1.5" diameter drain hole size.
For joining my Skadis panels together. See panels at collection https://www.printables.com/@HighDesertHacker/collections/2757420 Attach to the M3 mounting holes on the back side of the panel. Back side mount results in a clean look. Using…
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. Angled opening. A hanging bin is a good choice when you need to remove it from the…
Large V block for bigger round stock. V Block dimensions: 6.0" long x 2" tall. Insert into dog holes. Optionally secure with 5/8"-18 nuts. See related items at https://www.printables.com/@HighDesertHacker/collections/2713891 Print…
Requires two M4 heat set threaded inserts, 4-6.0 mm long. Mounting point hole separation is 4.0". As this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. Print standing on…
Designed for mounting on a wall, or attach to slatwall with adapter. Can also stand on it's own. Holds mobile phone, including case. Maximum size of 3.25" W x 6.5" H x 0.56" D. Cutout at base for charging cable. Print on it's side with…
See other slatwall items at https://www.printables.com/@HighDesertHacker/collections/2835948 If it works for you, please Like. A Make is always appreciated.
For joining my Skadis panels together. See panels at collection https://www.printables.com/@HighDesertHacker/collections/2757420 Uses the M3 mounting holes at the corner of each panel. This frees up Skadis slots for your accessories.…
Hanging bin, compatible with Akro bin rails and Skadis panels. Dimensions: 80 mm wide x 50 mm tall. Angled opening. I use this smaller bin on Skadis panels, with the Skadis to Akro rail adaptor…
Standoffs for Skadis panels. Use with my panels, Ikea, or 3rd party panels. These standoffs set the panel face at 27.5 mm from the wall. Features a recessed bottom if you want to attach a 10 mm diameter felt pad. Example pads include…
For quick access to your calipers. Extended 10 mm from the backplate to easily grip the calipers for removing and replacing. Can be attached to a Skadis panel or wall mounted. Compatible with digital calipers, including Louisware,…
Use with Catchmaster Max-Catch Mouse & Insect Glue Traps. e.g. Amazon ASIN B007E83LUM Choose from the original version or version 2. Version 2 (v2) has front and back lips to prevent the trap from sliding out when moved. Instructions:…
For any binocular with 1/4"-20 female front mount. Designed for binoculars with up to 50 mm objectives. I use these with my Vortex Ranger HD R/T 10x50 binoculars. 2 lengths provided 80mm, 55 mm. The shorter one will fit in most binocular…
M4 mounting holes. As this is a structural part, recommend 50% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. More info at blog.outpost4.org.
Holds a scraper or putty knife on a Skadis panel. Intended for metal blades as the majority of the weight must be in the blade for it to sit stable in the hooks. 3.0 mm slot opening for the blade. 35 mm clearance from the from the panel…
Holds 15 collets in 3x5 arrangement. Compact footprint. Outer dimensions of 156.0 mm L x 94.0 mm W x 43.0 mm T Trays can be stacked on top of each other. Print standing up, with supports (for the stack insert on the bottom). More info at…
Insert tapers from 1.65" to 2.0".
Requires M4 heat set threaded inserts. See other slatwall related items at https://www.printables.com/@HighDesertHacker/collections/2835948 If it works for you, please Like. A Make with a photo is always appreciated to let others see how…
Interior Dimensions: 4.0" L x 2.0" W x 2.0" D Compatible with Akro hanging bin rails. See related items at https://www.printables.com/@HighDesertHacker/collections/2772311 Print standing up, with supports (for the hanger lip). If it works…
As this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. Print on it's side, with supports. See other slatwall items at…
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. A hanging bin is a good choice when you need to remove it from the rail frequently,…
Peg for use with BuildPro tables and 5/8" dog holes.
T-nut for standard aluminum 3/4" T-Track with 3/8" slot. Refer to dimensions photo. Examples include Amazon ASINs: B098LG6DVV, B0BJK7YL55, B0C4XYW5RG Length 1/2". Must be inserted in one of the track ends. Uses one M3 x 4-5.7 mm long…
Bin can be wall mounted or attached to a Skadis panel. Can be mounted tilted forward using the angle adapter. See https://www.printables.com/model/1461429-skadis-angle-adaptor-30-degrees Dimensions: 80 mm Wide x 100 mm Tall x 45 mm Deep.…
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. A hanging bin is a good choice when you need to remove it from the rail frequently,…
Stacks nicely in tool chest drawers. Using these for storing end mills and other tooling. Print with supports (for the stacking footprint on the bottom). Contact me for additional sizes. If it works for you, please Like and post a Make…
Traditional plexi scrapers warp when scraping. This design has ribbing to keep it flat while scraping. (optional) For the ultimate in stiffness and flatness, you can snap in an aluminum angle. Size: 0.75" x 0.75" x 1/8" thick x 6" long.…
If it works for you, please Like and post a Make for others to see.
Hanging bin for Skadis panels. Compatible with Akro bin rails. Dimensions: 120 mm wide x 75 mm deep x 100 mm tall. For Skadis panels, use the Skadis to Akro rail adaptor…
Base: For use with the Circuit Setup Project Box solderable protoboard. This is the board I use the most for my Wemos projects as it is big enough for 90% of projects, is reliable, and silkscreened on the back side. Refer to…
Molle Knife Sheath Mount. Molle clip with two mounting slots for kydex knife sheath. I use this to attach my knife to a hiking pack. Fits knife sheaths with appx 1 7/8" / 48 mm slot separation, including Coldsteel SRK SK-5 knife sheath…
Bin can be wall mounted or attached to a Skadis panel. Can be mounted tilted forward using the angle adapter. See https://www.printables.com/model/1461429-skadis-angle-adaptor-30-degrees Installation - Skadis Mount Requires two M2.5 Slot…
Combine with one of my Collet Storage Box Tray Inserts. e.g. ER16, ER20, ER25 trays. Or make your own tray insert. Boxes are stackable. Print standing up, with supports (for the stacking footprint on the bottom). More info at…
T-nuts for standard aluminum 3/4" T-Track with 3/8" slot. Refer to dimensions photo. Examples include Amazon ASINs: B098LG6DVV, B0BJK7YL55, B0C4XYW5RG Length 1/2". Must be inserted in one of the track ends. Uses one M3 x 4-5.7 mm long…
Will fit a phone of < 79 mm width and < 14 mm depth. Attach to a mount of your choosing with 3mm button head machine screws. Designed to slide in quickly with a usb cable attached. I use in my vehicle, mounted such that camera sits above…
I print these 4 at a time, sequentially (by Object). If it works for you, please Like and post a Make with photo for others to see.
If it works for you, please Like and post a Make with photo for others to see.
If it works for you, please Like and post a Make for others to see.
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. A hanging bin is a good choice when you need to remove it from the rail frequently,…
Print with supports (for the stacking footprint on the bottom). If it works for you, please Like and post a Make for others to see.
Print with supports (for the stacking footprint on the bottom). Mix & match with other tray sizes in my collection. If it works for you, please Like and post a Make for others to see.
For use with the 3DZWMAN Heat Set Insert Press, Model "Machine high", Amazon ASIN B0DHKPHKJZ. A press for installing threaded inserts. Pegs for storage of soldering iron insert tips. Slots for storing the included tools. Install this on…
2 M4 mounting holes.
Slatwall fixture for mounting aluminum cans. 3 piece snap together assembly. Separate slatwall mounts for 12 oz and 16 oz sizes. More info at blog.outpost4.org.
Print with supports (for the stacking footprint on the bottom). If it works for you, please Like and post a Make for others to see.
Screw on cap to protect the cartridge tip and threads. I use these in my bike tool pouches and containers. Fits standard 16g and 25g inflator cartridges. Threaded UNF 3/8". If it works for you, please Like and post a Make with photo for…
Slip on sleeve to protect your hand from freezing during inflation. More compact than neoprene/foam alternatives. Provides nominal protection from cold. Fits standard 16g and 25g inflator cartridges. I print with 3D Honeycomb infill at…
Note that shelves can be butted together to make a wider shelf. Combine with other width shelves to make your desired width. e.g. combine the 120 mm with 80 mm wide. Installation Requires two M2.5 Slot Connectors. See…
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. A hanging bin is a good choice when you need to remove it from the rail frequently,…
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. Angled opening. A hanging bin is a good choice when you need to remove it from the…
Fits utility sink with 29-30 mm / ~1.156" rim. Mount is 3.0" long. Refer to my other models for attachments, including hanging bins. Compatible with Akro hanging bins, e.g. AkroBin 30210. More info at blog.outpost4.org.
I prefer to add slime to all my bicycle tubes. Combined with tire liners, it's a great way to minimize flats. Slime tubes are sized for Schrader valves, so using with Presta style is messy. This adaptor provides a good seal with the tube…
Hanging bin, compatible with Akro bin rails. Dimensions: 80 mm wide x 80 mm deep x 20 mm tall. I use this on Skadis panels, with the Skadis to Akro rail adaptor…
10 round ammo box optimized for 7SAUM magnum rounds. Includes top cover(s). Designed for carry during backpacking and hunts for minimum size, weight, and silence. Case head fits snugly in the bottom to reduce rattle. Install an optional…
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. A hanging bin is a good choice when you need to remove it from the rail frequently,…
Pool chlorine float. Designed for 3" diameter, 8 oz tablets. Diameter: 5 3/8" Features - tablet basket storage in the bottom eliminates top opening, dramatically reducing float size. - tablet is stored out of sight. - basket has a twist…
Use this tool to bend and strain relieve the tubing. Squeeze the tubing and press into the channel for a secure fit. Intended for 6.0 mm o.d. flexible tubing. Radius of curvature: 50.8 mm. Includes various angles. I use these for bicycle…
Print on it's side, with supports. If it works for you, please Like and post a Make for others to see.
Medium V block for round stock. V Block dimensions: 5.0" long x 2.25" wide x 1.5" tall. Insert into dog holes. Optionally secure with 5/8"-18 nuts. See related items at https://www.printables.com/@HighDesertHacker/collections/2713891…
This mount inserts into any table with 5/8" dog holes, 2" hole spacing, e.g. BuildPro welding tables. Accessories attach using two M4 mounting screws. Requires M4 heat set threaded inserts. See related items at…
Glue photo to frame using ModgePodge. Apply ModgePodge to face of photo also to protect it. Can attach an adhesive backed magnet to the back. If it works for you, please Like and post a Make with photo for others to see.
Hanging bin for Skadis panels. Compatible with Akro bin rails. Dimensions: 120 mm wide x 80 mm deep x 10 mm tall. For Skadis panels, use the Skadis to Akro rail adaptor…
I use these to cover rebar ground stakes used as property boundary markers. Mild threading on the interior to prevent cap from slipping off. For 3/8" / 10 mm rebar such as e.g. Amazon ASIN B086SC2XTW Note that actual rebar diameter can…
Print Recommendations - PETG. As this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. Print on side. See other slatwall items at…
Hanging bin for Skadis panels. Compatible with Akro bin rails. Dimensions: 120 mm wide x 80 mm deep x 20 mm tall. For Skadis panels, use the Skadis to Akro rail adaptor…
Hanging bin. Can be mounted on Skadis panels and any compatible Akro Bin rail. Stackable - these can be stacked on top of each other, on or off the rail. A hanging bin is a good choice when you need to remove it from the rail frequently,…
