Counting matching models…
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen and auto scaling to accept up to 1920x1080 input resolution. Waveshare 7inch HDMI LCD (H) Mount…
(Update 3/27/2024) Added Pi5B Bottom/Lid. (Update 11/14/2019) Added Pi4B Lid. (Update 4/12/2019) Uploaded IGES model files for easier remix. (UPDATE 3.28.2019) Pi3B Case: improved structural strength by slightly thicker walls. Desktop…
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen. Waveshare 7inch HDMI LCD (C) ) Mount options: My desktop mounts (45-degree / 60-degree) with Pi…
UPDATE 1/24/2024: Fixed a bug introduced by the previous update. (Thank you @DapperPlanMan_385324 for the feedback!) UPDATE 1/12/2024: Added a variant with smaller holes. (Thank you @FirstLayerPrints for the feedback!) This is a duct…
(Update 11/25/2019) Added the latest version STL files (that matches with IGES ones). (Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen. Elecrow 5inch…
This is a case for Raspberry Pi 5 supporting official fan as well as unofficial fan. Supported cooling configurations This case supports following variations in terms of cooling. No fan Official fan Unofficial fan (40x10), eg. Noctua…
(Update 2/7/2023) Added a fan version for Pi3B Lid. (Update 11/23/2022) Added a fan version for Pi4B Lid. (Update 11/14/2019) Added Pi4B Lid. (the bottom part is same as 3B, so please use "Pi 3B Bottom".) (Update 4/12/2019) Uploaded IGES…
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen and auto scaling to accept up to 1920x1080 input resolution. EYEWINK 7inch HDMI Display-C Mount…
(Update 1/26/2020) Added Amp and Speaker cases. Added a cover for LCD panel's bottom part. (Update 1/11/2020) Thickened walls slightly. This improves rigidness and also the modified back wall makes assembly easier. Summary This is a case…
A garden hose cap for surviving winter:) This conforms to US Garden Hose Thread standard. This is not a water tight design, so please seal it if needed. ガーデンホース用のキャップです。カジュアルに冬を越すためのものです。 ネジ山の形状は北米ガーデンホーススレッド仕様に準拠しています。…
UPDATE: A new version for this LCD case is here. Waveshare 7inch HDMI LCD(C) Case A case for 7-inch Touch HDMI LCD (C) ) that is sold by Amazon and Aliexpress etc. 4 small wood screws #2x1/4 or so are recommended to assemble (of course…
This is VESA 75mm mount mainly designed for attaching my LCD cases (listed below) with the great articulating arm. Thank you very much for @doctriam for the great arm design and also @Tertiary for sharing the mounting plate. Also I…
(Update 3/8/2019) A new version is posted here (Update 1/21/2019) Added a desktop foot. A case for 7-inch HDMI/VGA LCD module that can take up to 1920x1080 resolution (with auto scaling - the native resolution is 1280x800). This case…
This is a tiny Bluetooth speaker system designed as a "kitchen speaker". Assembly requires following parts and a bit of soldering. 1 x Bluetooth Receiver: TinySine Bluetooth Receiver Board @Amazon. 1 x Amplifier: Adafruit Stereo 3.7W…
An enclosure for PAM8403-based tiny audio amplifier board that can be purchased from online stores like [Sainsmart] . There are two versions with or without vents. This STL model has been optimized for Hatchbox Wood PLA. For different…
A case for 7" / 10" LCD panel with HDMI input. Angle is adjustable (thanks to the articulating arm thing) Both of horizontal / vertical mount is supported. Supported LCD Panel / Driver Board 7" panel Chimei Inolux N70ICG-L21 10" panel AUO…
(UPDATE) Added a picam quick mount! A Raspberry Pi 3B/2B case with integrated mount for Prusa i3 MK3, mainly intended for Octoprint/Octopi scenario. Also a quick mount for Raspberry official camera. Necessary parts: 4x M2 6mm (or shorter)…
Caps for EDEN garden hose quick connects . This is not a water tight deign. Please seal if needed. Related Garden Hose Cap by ywabiko | Download free STL model | Printables.com Quick Connect Cap by ywabiko | Download free STL model |…
(Update 4/12/2019) Uploaded IGES model files for easier remix. This is an updated enclosure for TinySine Bluetooth receiver board series. Improvements: Support for a push button implemented on some boards (to receive calls etc). Quick…
This is a face shield (PPE) that implements following design considerations. Front plastic sheet attaches inside . Top cover sheet attaches outside, making "eaves". This design prevents droplets coming from the top to enter the inside…
(UPDATE 1/31/2019) Fixed a bug in mount#2 (front side one) that regressed since the last update a few days ago. Also added mirrored (right side) versions for both. A mount for attaching 2x Raspberry Pi on Prusa MK3 (and 2x Pi camera)…
This mount meets following needs. Camera setup/takedown can be done under umbrella. Clean appearance. No bulky clamp. PLA+ filament is recommended. Tested with Overture PLA+. Requirements Umbrella having a detachable handle with M14-1.0…
(UPDATE) Added a model with speaker stand as per a comment . An enclosure for 1" speaker [Dayton Audio CE32A] that can be purchased at online stores like [Parts Express] Depending on your printer and/or filament types, the speaker driver…
This is a quick snap-on style 60-degree case for 7-inch HDMI/VGA LCD module that can take up to 1920x1080 resolution (with auto scaling - the native resolution is 1280x800). You can attach a compatible Pi case on the back side as shown in…
This is a Raspberry Pi Camera V3 mount for Prusa XL. Camera angle is optimized horizontally to cover the entire bed. Parts 1x Raspberry Pi 3B/4B 1x Raspberry Pi Camera V3 ( Wide angle version recommended) 1x Pi3B/4B case (+Fan) by ywabiko…
Update 8/24/2017: Added a version with SD card access hole as per the feedback (PhatDacSD.stl). This is an enclosure that just fits Pimoroni Phat Dac available at @Adafruit attached on a Raspberry Pi Zero W with the included GPIO header.…
This case meets following needs of mine. Carry on contacts on airflights Store a backup in the fridge … while hydrogen peroxide solution is still making bubbles. You want to avoid airtight containers, but also leaking solutions. (Well,…
A small thing to keep your (cheap) cooler open:) Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.15 Filament: Hatchbox PLA Category: Outdoor & Garden
This is tested with FV-0511VFC1 and FV-0511VF1. You can change infill density and pattern by changing slicing parameters. Example PrusaSlicer configuration to reproduce mine: Print Settings Layers and perimeters Horizontal shells Solid…
This is a mount to attach AC Infinity 120x38mm fan on a standard 4" duct hose (and for venting to the outside through a window). Tested with followings. AC Infinity Fan AXIAL HS1238A AC Infinity 4" duct hose. AC Infinity Fan Speed…
(UPDATE) Added a model with speaker stand as per a comment . An enclosure for 1" speaker [Dayton Audio CE32A] that can be purchased at online stores like [Parts Express] This is single piece type of enclosure that you can just insert the…
This is an extruder part of FLSUN QQ delta printer that may break like mine. I'm publishing this on behalf of FLSUN who kindly sent me the STL file upon my request. Mine broke after 2 months of use unfortunately. I printed this STL model…
An enclosure for Adafruit Stereo 3.7W Class D Audio Amplifier MAX98306 . Currently this enclosure is for direct soldering scenario only, i.e. you cannot use the enclosed screw terminals and the jumper. Cable holes are designed for raw 22…
This is a cute little case for a GM/GS-compatible USB MIDI module DreamBlaster X2GS : GS WAVEBLASTER CARD https://www.serdashop.com/X2GS That's it!
Update 12/22/2018: Fixed a bug reported by fleinze . Thank you! This is an enclosure for Adafruit USB Micro-B Breakout Board Enclosure . Currently this enclosure is for direct soldering scenario only, i.e. you cannot use the enclosed…
This is a case for ESP32 Wrover DevKit V4.1 . Usage scenario: - Wifi NTP Clock (I just want an accurate clock. Nothing else! haha) - A simple case for your tinkering:) This consists of 3 models. - Case - Lid (optional) - Stand (optional)…
A replacement parts for FLSUN QQ. This is the support part that holds an axis motor (at the bottom of the printer inside.) Mine broke after 5 months of use. I'm posting this model thanks to very friendly FLSUN QQ support staff. Posted STL…
An enclosure for 1" speaker [TangBand W1-1070SH] that can be purchased at online stores like [Parts Express] 1インチスピーカードライバー [TangBand W1-1070SH] 用のケースです。 アメリカでは [Parts Express] 等から、日本では コイズミ無線 等から入手できます。 Print Settings Printer: QIDI…
(Update 4/12/2019) Uploaded IGES model files for easier remix. (Update 3/28/2019) Pi3B Case: Improved structural strength by slightly thicker walls. (Update 1/21/2019) Added small notches to better hold the lid and Pi case together. A…
An owl stand (woodpecker repellant) to put an Owl in your backyard. He protects my house from woodpeckers very nicely:) ふくろう君 を庭の地面に設置するためのスタンドです。きつつき除けです。うちでは効果絶大です。 Print Settings Printer: QIDI Tech-1 Rafts: No Supports: No Resolution:…
Summary This is a remix from the great "Swedish" face shield 3D-PRINTED PROTECTIVE VISOR by 3DVERKSTAN . Two main benefits: Bulk print friendly (x3, x4 at a time) Small printer friendly (eg. Makerbot/Flashforge) This remix splits the…
A mount for your 400W light to be secured on pier fences, for fishing squids etc. This is designed for this specific light and 2" x 2" steel fences. 400W LED Work Light When printing, I would recommend to increase perimeter thickness to 4…
These are all currently available results.
