Counting matching models…
Stay consistent with your ball height. I saw these being sold in the Club House at one of my local courses and wanted to make one. In the one i made you can see in photo i made a color change and started white at 3.20mm and changed back…
Tired of using the disposable can you purchase you Nicotine or tobacco products in? Want to use something more permanent and stylish, look no further!! This design has a compartment for fresh Pouches and a small compartment for used ones.…
Gravity Towel Hanger – A clean and minimalist way to hang your towels without having to drill giant holes or using bulky racks. This 3D-printed design uses nothing but gravity and a trapped 15.5 mm ball to securely wedge your towel in…
I designed this to mount on the celling of my garage to hold and keep poles safe and out of the way. I made 3 different designs. Made to replace the old wooden ones, like in the pictures. v1 & v2 - are 214mm wide and 45mm space where pole…
New to the 3D printing world and design. I was inspired by others who designed similar fidgets. So i took on the task to design one and test myself. This is what i ended up with. This print is very large and measures 105mm X 46mm and will…
My children are know for sticking their dirty hands in a community bag of chips. My wife bought 2 of these online and decided to design my own and share. There are 2 different versions. V3 has reinforced end and tougher to squeeze and v4…
10ml Bottle Dust Cap (TPU) Keep your bottle tops clean, sterile, and entirely free from dust and debris! This functional dust cap is specifically designed for most 10ml bottles , though it will likely fit most 5ml bottles as well, given…
After a long time I was able to figure out how to design a spinner for those who are unable to sit still. PIP, or have fun with a multi color. Ohhh, and its friend the CONE spinner. Tighter tolerance then most. NOTE: I have not attempted…
Made this for my in-laws and they loved them. I made from Matterhackers PC Carbon Fiber and i haven't made with other filaments yet but sure they'll work. This design is with a 22mm opening and flexes to around 30mm. Other sizes to come.…
This design might not be for everyone and if it offends you…oh well. But 85% of the US is loving him. With 9.5mm holes for magnets designed for the refrigerator or anything magnetic. Three color, with the ability to print without an MMU.…
A friend was having wired surveillance installed and didn't want to staple the wires and wanted the ability move if needed or add more wires. I saw others that didnt have screw hole so drew these up for him and worked great. Enjoy and…
This was something my children wanted to to print for them to play with and they loved. Being new to the 3d and design world, I try to challenge myself. I was enthused on how it was designed. So i decided to draw one out and here it is.…
Like i said before i was looking for a durable phone stand that could collapse into a small bag without breaking. I was browsing Printables and found a perfect design from @JanStech . I took pix and rev engineered on OnShape. I added and…
I got tired of reaching into the junk drawer and having to wind the tape back. This makes it a sinch to wind and keep organized. I used PLA and printed at .20 height. I added modifiers to strengthen the pegs that connect the 2 parts. I…
🏹 The BOW DADDY: The Ultimate Vehicle Bow Hanger Keep your archery equipment safe, secure, and out of the way during transport! The BOW DADDY is a custom 3D-printed hanger designed to mount effortlessly to the back of a car seat,…
Although I'm new to design and 3D printing, my buddy broke this piece and asked if I could duplicate. I was able to duplicate and he was able to replace the broken latch with the new 3D printed item and replaced perfectly. ((Please, give…
Made window cutouts for LED's because i literally do not have any translucent filament and wanted to see the LED's. Its a shame to cover this kickass board, but it does help protect it. It also has the name ( FluxCapacitor ) on the top…
My wife put some of these in the cupboard to use on our open bags of chips and crackers and after going to purchase more, i thought id design to print. They work great and work on small bags all the way up to a jumbo bag. I made 2…
My wife needed something to store her purse while driving and asked if i could fab something that could attach to the backseat. I saw something similar they were selling at WalMart and made my own version. It was used on both, Tacoma and…
I needed a box that had 59mm X 59mm inner dim and wanted to test myself with PIP model and this is what i came up with. There are 2 different options; one with PAUSE to place magnets and supports and one without supports or a pause for…
I found this design and printed for my children. One thing I found is I couldn't fit all pieces in the board and fold. I wanted to test myself and attempt to design/draw a PIP design after the model I downloaded. This project was inspired…
Wanted a handle and toss the strap the speaker came with. Found the handle on Thigiverse and made several changes to avoid having to use glue. Only need the hardware mentioned above. HAVE FUN & HAPPY PRINTING!!!!!!!!!!!!!!!
Description A friend of mine uses Hot Shot's EDT at every fill-up and needed a secure, accessible way to store the bottle in his truck. I designed this magnetic holder so it can be mounted directly to the inside of a truck bed for quick…
With all the drives i use with drawings, i needed some organization. With 16 slots and a small scrap bowl for oddities Enjoy and HAPPY PRINTING!!!!!!!!!!!
I was tired of accidental press of the Netflix button and saw a model that was a 2 piece that had to be taped, but wanted one piece that didn't require tape. I designed this with a little clip at the top to hold the controller. With a…
I wanted to use the HULA feet for the Prusa Enclosure and not just the printer itself. So i used the outline of the original foot for the Prusa Enclosure. From there I designed the foot to connect to the HULA foot and enclosure. Hope…
This was inspired from making my own dry box. I made holes in the base and lid to melt in EZ Lock brass thread. The hydrometer mount was designed from another designer and unfortunately cant find the name. Will update when confirmed. I've…
This is a Basic Coffee Filter “organizer/Holder” for the #4 size filter. It holds a box of qty. 100 nicely. I placed 5mm counter sink holes for wall mount and a cut out on one side to easily grab a single filter.
I just purchased the Dr.B0rk NRF24 v2 – Generic Devboard and found a design to print out. I printed it and was all wrong. The reason was the one I printed were for v1 and the board I have is RabbitLabs v2. So, I had to design one for me…
My buddy needed a case for his JBL Charge 5 to Velcro to golf cart frame, quad, motorcycle, etc. I found this on printables and made as few tweaks to the original… A BIG tnx to Seb.B I only removed the lanyard attachments and added…
Needed something to keep my razor in place. Usually sits on the rack and gets knocked off. It was designed to connect to a 5mm bar, which is a common size for most shower racks. I use it for “Harry's” razor, but will fit most. Update:…
A threaded container for ( qty 4 ) 20700 Batteries. Needed it for travel and safety to avoid batteries touching each other. ((Please, give model a LIKE 👍 when you download)) Enjoy and HAPPY PRINTING!!!
I made a mount when I first started learning CAD. I wanted something more simple. Came across something on thingiverse and is what inspired me. After doing a little research I found the original designer was Squirtle . He/She was the…
My Wife buys and uses a roll of gift tags. It usually unwinds and becomes a mess and tagsm end up getting ruined because it just rolls around storage box. this device also helps dispense the stickers. ENJOY & HAPPY PRINTING!!!!!!!!!!!!!
Description If you are looking for a perfectly fitted storage organizer for your Niimbot D11 , this is the one! I noticed a lot of existing organizers on here were either way too bulky or were mislabeled as working for the D11 when they…
These are all currently available results.
![Stash Box (Print In Place) PIP [59mm x 59mm]](https://media.printables.com/media/prints/1161576/images/8755095_4a40b742-6149-42e5-ae9f-9251b5e2e749_2b131e23-488d-4cc5-ba89-ec72756e09de/screenshot_20250123_171517_chrome.jpg)
