Counting matching models…
This is a set of Depth gauge for 5-12 mm drills. They have a opening for M3 nuts an cylindrical screws to tight the stop on the drill bit. Printed with PETG @ 0,2mm layer hight with 20% infill.
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
A simple cable duct for my Ikea Platsa cabinet project.
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for one variant
A small box to store resistors from 10Ω to 1MΩ in the standard steps. In the future I will may be design some other boxes for electronics, that fit to this box There are two versions of the Resistorbox, the small one has a hight of 8mm,…
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for PETGSource material: PET
A small holder for Multifix Aa to holde an Indicator for centering the Workpiece. The indicator has a stem diameter of 8 mm for mounting and a max size of the face of 62 mm. To use it, you need two M3 screws an 3 M3 nuts. The print file…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
This small box can hold 3 Jaws and 4 M8 Bolds, so you can store additional Chuck bolds ore the one, of the Chuck with 4 bold. Printed in PLA with a 0,6mm nozzle and 0,25mm layer hight.
Print approx. €2.40–€2.93 excl. taxPreliminary estimate for one variant
I designed the tray for my Multifix holders to store them in the workbench. Printed with PLA @ 0,25mm an 0,6mm nozzle.
Print approx. €3.65–€4.46 excl. taxPreliminary estimate for one variant
Gridfinity Bin for 10 carbide insert boxes with dimensions of 40 x 12,5mm.
Print approx. €4.96–€6.06 excl. taxPreliminary estimate for one variant
I needed a small Box for the Dowel Pin Center, so they are not loos in the toolbox. The gcode for the has a color change at 0,6mm. The multicolor gcode has a color change only for the text. I also have a version for the 6mm Dowel Center.
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
I needed a small Box for the Dowel Pin Center, so they are not loos in the toolbox. The gcode for the has a color change at 0,6mm. The multicolor gcode has a color change only for the text. I also have a version for the 8mm Dowel Center.
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
This small box is to store 100mm chucks ( 3 Jaws, 4 Jawas, and collet chucks) in the Gridfinity drawer. Printed in PLA with a 0,6mm nozzle and 0,25mm layer hight.
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
This small box is to store a MT2 Livecenter and a MT2 Deadcenter in the Gridfinity drawer. Printed in PETG with a 0,6mm nozzle and 0,25mm layer hight, but all other settings should also work.
Print approx. €3.19–€3.90 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity Bin for 4 Lathe Tools SNR0010K11 S10K-SCLCR06 SCLCL1010E06 SSSCR0810D06
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
I created this model to check the diameter clearance of my directly printed threads. The offset is from 0,1mm to 0,3 mm with 0,05mm steps. The offset is radial, so for the diameter it is double. The base thread is a default M5 thread with…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
A Nut to replace the original SodaStream Nut wich is pressing the Tube in the bottle head. The broken “old” nut can stay on the black tube. printed in PLA with a layer hight of 0,2mm
This is a Case for the XL4016 Step-Down Converter. The circuit board size is 65x36,5mm. The holes for the screws have a distance of 58 mm at the longe side and 26mm at the short side. The diameter of the hole is for 3x7,5mm sheet metal…
It is designed to saw on the side without rubber lip with the jigsaw and align the guide rail according to the saw plate. Assembly: I melted M4 threaded inserts into the jigsaw base. I then screwed the guide to the foot with M4x8 screws.…
A modular rack for the CO2 cylinder, to store them more efficient in the shelf. The rack fits perfectly on the IKEA Hejne shelf. The parts are screwed together with M3x16 Screws. The connectors are unthreaded and the Screws are screwed…
A small tool to align Plywood. With the tool you can align boards like in the pictures, but you can also align the corners of for example a box. There are three different models for 9, 12 and 15mm Playwood. Printed with 0,2mm layer hight…
The hex mount is designed hold the rip fence of the small 12V circular saw in the lid of the Sortimo/ L-Boxx. The holder is printed without suport and 15% infill. In the slicer file, the “bridge” has a higher infill (30%)
This is the fan case and mount for my cabinet ventilation project. The housing for the controller can be found her : https://www.printables.com/de/model/162908-housing-for-cabinet-ventilation-control
I used the linkt clamps as inspiration and designed them to fit at the small clamps. The parametric files are available at the following link.…
The holes at the hitch are for M4 threaded inserts. The hole to mont the adapter to the bike are for a M5 screws and M5 nut I also designed an adapter for smaller Seatpost https://www.printables.com/de/model/261154-spacer-for-hitchadapter
Box for the small Duschbrocken solid shampoo. For the box I designed a grid insert, so the shampoo is not laying in the dripped water. The walls are designed for 0,4mm nozzle. Printed with 0,2 mm layer hight and 0,4mm nozzle. I printed it…
I designed this box to watch the timer of my washing machine. I run the example code from the library with the cam server. The batteries in a separate Box .
The hinge is brocken at my fridge so I designed the replacement. I printed it from PETG with 0,1 mm layer hight and a 0,4 mm nozzle.
Box for the Duschbrocken solid shampoo. For the box I designed a grid insert, so the shampoo is not laying in the dripped water. Printed with 0,2 mm layer hight and 0,4mm nozzle. I printed it from PLA, PETG should also work fine
Gridfinity Bin for 10 carbide insert boxes with dimensions of 45 x 10mm.
Control knob for rotary encoder with a flat fase fits for my ventilation Housing
This spacer is to mount my Bicycles Hitchadapter on Seatposts with a smaller diameter. I printed it with 0,2mm layer hight, 0,4 mm nozzle from TPU, but other materials should also work.
This compact Gridfinity holder was designed specifically for the narrow IKEA ALEX drawer . No more loose label tapes rolling around in a drawer — everything has its place! 🗄✨ Available in two versions: 📏 12 mm TZe tapes 📏 18 mm TZe tapes…
As I use a TocuhDRO evaluation unit on my lathe and milling machine, I needed a holder to hold the plugs of the linear scale. Three magnets are integrated in the holder so that it can be attached to the metal parts of the machines. The…
Simple endcap for the Kovalex aluminium profiles for WPC terrace floor. Printed with PETG @ 0,2mm layer hight with 20% infill.
No more searching through a box for the right reamer! 😍🔧 This Gridfinity organizer is designed for reamers from 3 to 12 mm , with each size having its own clearly defined position. 📏🧩 Two versions are included: 🔵 H7 version – with H7…
A compact and practical solution for keeping commonly used ER32 accessories together instead of scattered around the workshop. 🙌 ✨ Features 🔩 ER32 square collet nut holders 🔧 ER32 hexagonal collet nut holders 📦 2 compartments for 25 × 50…
These are all currently available results.
