Counting matching models…
This breakout is meant to put my X12Vteam Parkside batteries to work in other projects like inverters, solar charging, outdoor, lighting, motor, and remote cars… please remember that the battery is only secured with friction so don't hang…
reverse slanted pistol grip for dog dryer. print with supports, a decent amount of infill, and perimeters can get warm, so I would use PETG or pla+ of some find. I printed the original but my mom wanted a different grip shape so I changed…
box to put this breakout board into for mounting. capacitor might be too tall, WIP still working on the lid machine screw kit: https://s.click.aliexpress.com/e/_oBtXEOO PCA board: https://s.click.aliexpress.com/e/_okMyQRY (affeliat links)
6.4" bolts "shoes" for pistol crossbow compatible with miniadder. print with any though and impact resistant filament and probably make you extrusion width smaller than 0.4mm. bring your own 5mm steel rod of roughly 11cm including point,…
leaf blower mount for PPWSFA 20-LI B3, quite powerful.
This extends the lower body of the 4Ah X12Vteam so you can spotweld more 18650 cells in parallel to create a 6Ah battery. this gives more performance than the 5Ah battery with 21700 cells. You are going to need longer screws to re-attach…
take the body of v3&4 and inlet make it one big part except the outlet, if you printer is big enough like the core one you can have your cyclone separator with less assembly effort. please downloet the outlet part from the original post
To be added 10mm mounting holes Layer height: Up to you Walls: I would say at least 3 Infill: 15 - 30 % should be fine (more cant make it worse) I use ender 3 V2 with CR-touch and octoprint with GST3D filament
with just a hub motor and a cheap controller and electronics you can make an electrically locomoted bicycle! Right now it works with rubber-on-rubber contact, however I am currently working on attaching gears and using a chain! Its…
Make your own air purifier with a 120mm PC fan. this is specifically designed to clip to my own filament rack storage system. However you can use it separately and not print the clip parts. You can use electrical tape to make up for any…
Silvercrest portable vacuum to hose, so that you can connect to other items like sanders, and dust collectors… the hose hole is 41.5mm you might need to make your own adaptor for it to fit your hose. should just be friction fir, you could…
A remix of a drill guide modified the drill holding sled so that there is no need for lineare bearings. just slides over the 8mm rods. You might need to lubricate or slightly enlarge the holes with a drill bit for a nice fit. Also the…
My take on a filament storage shelf is because I need a specific design so I can still close my door. You will need a long screwdriver shaft to tighten the top screw.
I used heat set inserts to put M3 screws to secure the buck converter. these converters are mass-produced so if yours looks like this one good chance it will fit. link to buck converter: https://s.click.aliexpress.com/e/_oEuSkmQ link to…
modified existing model so my particular rectangular magnets fit. (11mm x 25mm x 3mm)
Would be more efficient with duct but works aight without. It should cool the motor by about 10 degree Celsius. (with very rudimentary testing) You need the ether reuse the stock screws or get a longer one. I think they should be standard…
fits up to 17 Heiniger blade compatible, I recommend glueing foam the inside of the lid so that they stay better and don't damage anything. you will need 40mm m3 bolts or m3 rods cut to length.
I made this to store my BLDC controller and a couple of power tool batteries. Maybe you also have a use for this. Made for bike seat with 25.3mm seat post. I printed in PETG on a ender 3, literally just fits on the build plate no room for…
Simple small part that that connects my vacuum hose to the popular dust collector also seen in the picture 35mm to fit inside the dust collector and 32.5mm on the other end so you can “screw” your 32mm vacuum hose on the other end. You…
simple yet useful storage for your groom-X Zeppelin nozzles, it fits snug around the stand bar with hole for tighten screw. Rounded corners, place for 3 nozzles, compact, easy print. enjoy
from 75x9mm sliders to support 60x9mm sliders not my model, remix check link for all files Mixer Pc volumes - Deej by Fed2828 - Thingiverse GitHub - omriharel/deej: Set app volumes with real sliders! deej is an Arduino & Go project to let…
These are all currently available results.
