Counting matching models…
Remix of T-MAN's Prusameter! made smaller as an extruder visualiser. Uses a 6mm x 2mm magnet. Saw this great little model of Prusameter by T-MAN (https://www.printables.com/model/158503-prusameters) and thought it would be a good…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Linear Rail wipe. Equivalent part number SBG20NUU Use some 8mm engineering felt and a small spring to keep the tension. Used PETG for some strength.
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
Just two simple floats to measure the rainwater levels in a barrel. Tie some paracord through the centre and use a pully to the outside of the barrel. Put the smaller float on the outside of the barrel. Print out of PLA or PETG, 5%…
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Simple V groove pulley with a press fit 608 bearing. Print in PLA or PETG, no supports needed. Doesn't really matter the layer height. Simple and quick.
Gridfinity storage trays for router bits with half inch shanks. Two heights Print in PLA+ with 10% infill and a large layer height >.20mm as there is not much detail. I use a .6mm nozzle to make it quicker. 1 x 1 x 6, 1 x 1 x 3 1 x 2 x 6,…
Clip for drying CPAP hose for AirSense11 hose. Designed to clip over a 10mm glass screen. Print without supports in PETG or PLA, .6mm Nozzle and .35 layer height. Version 1.1 Updated model with a support at the back to strengthen the clip.
See https://www.printables.com/model/507270-harvestright-camera-mount for @dgardner_169337 excellent solution. I need a new bracket to fit the camera that I had. It needs 4 x M3 x 12mm bolts. Printed in PLA+ with 15% infill, can use other…
Replacement knob for end of Unimig 150 earthing clamp. Added hex for easy removal of cable off machine. 20% infill, .3mm layer height. PLA + or PETG
Two models for Gridfinity trays for Deckel Pantograph Spindle collets. These suit Deckel Models KF12 KF2 and KF3 which have two different sized collets. The large holds 4 collets in a 1 x 4 x 4 and the small 9 collets in a 2 x 2 x 3.…
The original part got lost. Used to plug the top of an oil reservoir on a 25kg Anyang Power Hammer. Its taped to have a friction fit and has a small breather hole so it isn't blown out from the back pressure. Printed in PETG, 2…
Made this to replace a bearing boot for an old motor, when the rubber boot disintegrated. Firs a 608 size bearing. Press fit for the bearing and the housing. Print with 3 perimeters in PETG or PLA+ (TPU if you can), layer height .3m is…
I melted the handle of my coffee jug, so designed a replacement one. It fits the coffee jug for the Little Guy Espresso machine, an awesome little unit. Just don't put it on the gas stove as it melts the handle! Handle printed in PETG…
This is a simple indicator float for concrete water tanks. A 25mm hole is cut in the lid, in this case a PVC access port. The sleeve is siliconed in. The float is put on the end of some 20mm PVC pipe and the indicator on the other end.…
These are all currently available results.
