Counting matching models…
Update 7/9/25- I am uploading a new file for this as the Y coordinates changes when adding the CFS upgrade kit. The new Print Volume is 300x295x300 as per Creality Wiki. I discovered this issue when trying to print my Z offset test and I…
Update 8/9/25- Based on some feedback the starting gcode was not mimicking the original profile from the K1 Max. I changed it and uploaded v8. PLEASE PLEASE PLEASE leave feedback! I want to make sure this is working and not useless to…
I created a material library file from Creality's suggested settings for the 22W Falcon2/ Falcon2 Pro. I have the Pro model but I am guessing the settings are the same among both machines. You can open this file directly in Lightburn.…
This is a full bed, 1 layer, z offset test. You can print this to adjust your z offset to get better first layers. Make sure you print this in 0.2 standard layer thickness for .4 nozzle size. There are some good videos online to show you…
I edited this model to hold my wife's new hair straightener brush. the model for the brush is the TYMO Ring Plus Ionic Hair Straightener Brush . There is a triangle part on the wall mounting portion of this that is from editing the model.…
This is a Remix of iamSteven's Rear Camera Mount from another site. I really liked the design of this, and was using it in my car for a few months without issue. While it was designed for his Land Rover, this works in many different cars,…
For those LEO that carry an ASP Baton with the belt holster. It comes with a spacer to accommodate different belt widths so it doesn't move up and down on your belt. Most people that I know have lost theirs. This fits in the grooves and…
This is a NEW Z offset test for the K1 Max after you install the CFS upgrade. While trying to mess with my machine I noticed my printer kept telling me that It was outside of the Y coordinates. I checked the Creality Wiki to see if…
Update: 6/5/25 If you use this with a riser system, when installing it make sure it clears the riser and everything else. I noticed an issue that it was hitting my rider that has a spot for my light kit and it ruined that part of the…
I have 2 doors that open towards themselves that do not hit the wall in the same spot. Space is a bit tight to use those half ball rubber bumpers and I didn't want to have to buy 2 flat wall bumpers. I made this to accommodate the 2 door…
I bought my Falcon2 Pro laser engraver preowned and it didn't have the tool head guide in the box. While I was waiting for it to be shipped to me, I wound up making a 3d printed version of it. The one that I printed was my first prototype…
Update: 9/28/24: I redesigned this since I had an issue that the opening was still too big and the PTFEtubing was pulled through it. I made the diameter of the opening smaller than the PTFE tubing. I Purchased the Kingroon filament dry…
Remix of the Chevy Bolt Holder.
I made a vent fitting for the TopCube 3D Printer enclosure I use with one of my printers. I primarily use the enclosure to keep dust off my machine and I leave the zipper open for ventilation. I wanted to vent it out my existing…
I tried to use reisschale filament bag spacers but the vacuum pump that I have is from Elegoo and the base of the pump is too large for those spacers. I scaled them up so that they work with this pump.
I bought the chair from Wayfair. It's a pretty decent chair but It was annoying having to constantly readjust the footrest ring from being pushed down. It has a handle to try and lock it in place but it seems to keep moving down,…
This is a remix model to directly fit a single neodymium magnet. I didn't have the size magnet that this was originally designed for. Print with support only for the magnet area. I used manual tree support and pried it out with a thin…
I needed a way to mount a small speed square to my laser engraver (falcon2 pro 22w). I have this old square that I think a relative made probably before I was alive but somehow it's still in my possession. It's perfect for lining up…
My address was looking a little worse for wear being in the sunlight. One of the numbers, the #7 was cracked. I tried to paint the numbers to bring them back to life, and it helps the other numbers, but the crack could still be seen in…
Just place in the proper size magnets, no glue needed.
These are all currently available results.
