Counting matching models…
I've seen multiple supports for young plants, but I want a cheap and quick to print utility. This is my version. The ring have a diameter of 40mm, the slot for the stick 3,5mm. I've printed this support tool with PETG because this is more…
I'll need a funnel for a ‘poor mans’ dust extraction system. Width of the funnel is 160x150mm with an adapter for 36mm exhaust hose (e.g. Festo rubber adapter). This is used with a micro lathe for sanding cork floats. The funnel is an…
This is a thread adapter M10 inside 1/2"-20 outside. I've used it to adapt a quick-release-chuck to a M10 thread of a piston of a turning lathe.
Key for an outdoor gas meter box probably in Germany only. Look at the schematic maybe it will fit to your needs too.
This is a replacement part for a STEMA trailer. A round knob 20mm to fasten a tarpaulin or net cover. No support needed, if you want to have a better surface you have to chose a smaller layer height, but you lose some stability. Diameter…
I like the idea from @ BlueThunder05 of his remix. But my PTC heater was 60^2 instead of 80^2. I wasn't able to change his FreeCAD design. So I exported it into fusion and cut 20mm sections in two dimensions (x&y) and 19mm in z.…
This is a tin for wet toilet wipes. I made it for wipes shown in this example. You can buy them in Germany. The box body (with the inner dimensions 114x104x50mm) is very tight with an clearance of 2/10 mm so your printer must be very…
I'll need a touch protection for the electronic component nearby a load cell. On picture 2 you can see this was made for the pcb with the red frame. But this pcb didn't work for my project. So I used the other one. If you have the same…
I designed a ceiling mount for my bush cutter, but I think you can use it for a bicycle and other long small devices too, if you use a stronger filament type. I use PLA which works fine for my use-case. To start this design project I…
Makita 2012NB dust collector adapter to insert a 44mm connector for a Festool dust extractor. You can still use it with a 50mm diam (DN50) dust collector hose (outer diameter of the adaptor). Be aware Festo have different type of…
A pair of protective jaws for my Quantum maschine 100 vise. They are fixed with 10mm/3mm magnets at the vise. The notches have a depth of 2/4/6mm.
Tool to align the band saw fence to the cut direction of the blade. Sometimes the blade isn't aligned to the fence. This small ruler type tool helps to check and align the fence to the cutting direction. The result is a better surface and…
This is a remix of a nice model. But I the inner diameter of the air connector was to small to get a good throughput without a high pressure. Additionally i want to have an angled connector, because the silicon tubes are so soft that you…
Due to regular usage of my Workmate 2000 the endcaps (rubber feet) gets hollow (see white circle). I want to have new one, but made of standard components. So I designed an endcap with a nut inside for the usage of a standard M8 leveling…
I needed a shelf for my spools of adhesive tapes. Hanging at a french cleat. The wooden rods have a diameter of 16mm and a distance of 80mm. I've added the construction data, so you can modify if you like. Be aware you can use this data…
This is an antenna or pole holder for a bar mesh fence (exactly for the fence post). I use a standard antenna pole (43mm) for a rain gauge. Maybe you have an other use case. I use two of this pole holder. The object not shown in the…
I use UV-Resin additionally to protect fishing floats or use it for coating. For this purpose I made a stand which fit into my curing station Elegoo XS. There are two rods for different heights. You need the piece (Rad=weel) twice.…
A pair of protective jaws for my Leinen 100 vise. They are fixed with 10mm/3mm magnets at the vise. The notches have a depth of 2/4/6mm.
This is a redesign for the runner of the awesome table saw jig of Peter H. I printed this to use the tool for the raw cut of Kumiko stripes. The runner is re-designed for a Festo Basis plus. Like the original you have to embedded a nut…
Wall mount holder to screw on for a Fluke T150.
Change engraved language to German and change/add two buttons in the section light. The mounting hole are designed for the switch type R13-508B
We need a stacking aid for ‘un-stackable’ cans. Most of the cans in Germany are stackable but some not. This is my solution to solve this problem for cans with the dimensions: 55x38mm. The full height is 204mm. I've added my design file…
Holder for two capacitors (51mm diameter) 5mm machine screw with countersink head, see picture. The holes in the ends are for a piece of Filament to align the ends.
Festo 33mm Hose Clip for older Festo Tools. The clips I found in printables are for the the newer one. All my small hoses for my Festo tools have 33mm in the outer diameter. You can print it without brim. The clip is designed with a tight…
I don't like to do anything in plastic. My favorite material is wood but 3d printing is the perfect add-on to that. So I designed one holder for workshop towels and kitchen paper towels (core ~40mm) for wood (if you are interested in the…
For my towel holder https://www.printables.com/de/model/533856-flexible-holder-to-fill-cardboard-tubes-of-differe see last picture, I'll need a better tear-off edge for industrial paper towls. This blade is 265mm long, the teeth have ~5mm
I'll need a storage for wooden sticks and leftovers in my workshop. In the past I used tubes for that, but every time you have to empty the tube completely. Now I want a storage where I can see the content. This ist the result. I used PLA…
This is a cap for an One-Hand operated spice mill. Due to the fact that I've very hot chili inside it isn't a good idea to have crumbs on the tablecloth. You need a 2mm O-shaped sealing ring.
Lid for this model https://www.printables.com/model/50664-case-for-eibotboard-ebb/comments/2281053 You find all necessary information when you follow the upper link.
I've searched for an excenter - but I don't find one - so I made one. The pin at the rotation part have a diameter of 10mm and a 3mm keystone. M5 for the the variable excenter slot. For test purpose I've made two different length, but I…
Since many years we use different apothecary glasses with wide neck for our spices. To safe some space we stack the 250ml glasses, but if you pull at the drawer they fell - that's pretty clear. To prevent this I've designed a stacking aid…
This is a holder for Christmas balls to use with the original Eggbot with the precision Egg Coupler. (https://shop.evilmadscientist.com/productsmenu/208) Used data … Diameter of balls: 56mm Diameter/deeps with the coupler: 23mm/10mm…
This is a beer mat or coaster holder for 100mm beer mats. You can stack 6 x 3mm coaster and you can stack the holder themself with other of the same type. I've used this holder for laser engraved cork coaster.
Illuminated panel for a door lock cylinder with Glow-in-the-Dark filament. My wife want to have a help in the night to find the key hole.
This is a sparepart for an old German Kastenfenster simlar to US storm window with inner sash or Double-casement window. This rubber (including metal spacer) prevent the handle to touch the outer glass. The general construction of…
These are all currently available results.
