Counting matching models…
Thanks to @bpopp for the original design and to @MarMed for the Skadis version! I printed the Skadis version, but found that it did not match my needs. Maybe the german paper towels have a different size than in other countries? I suggest…
I needed to offset some hinges in a cabinet to evenly distribute the gaps between the doors. Although there is already a Blum Hinge Spacer on Thingiverse (Thing 112480 by Tinkerer) I felt I have to do a parametric hinge spacer. Use…
These templates let you drill additional holes for your shelf easily. Use them either to add in-between holes to existing holes or add new holes with the same distance. Settings in the STLs provided: Hole Distance: 32mm Hole diameter: 5mm…
When fermentation goes wild This thing is about fermenting beer (or other stuff). Usually an airlock will be sufficient for your fermentation, but sometimes – if the head space in the fermenter is tight or the yeast is too aggressive –…
I decided to create this thing to measure my home brewing hoses easily. It's a good starting point to download and print things with certain diameters like hose barb tails. It's created in OpenSCAD so you're able to customize everything…
This is a rather simple design. The purpose of the clips is to hold down a radiator grille. You may have to adjust values in the OpenSCAD file to make it fit your situation. I've included an symmetrical and an asymmetrical clip as STL to…
I like the board game Furnace, but it tends to be quite chaotic on the table. Because I haven't found any game inserts, I built some that match the existing box compartments. Please note that the inserts are not suitable for vertical…
Slotted Drawer Boxes To get rid of my drawer cabinets I designed this thing to put all kinds of screws and stuff in a single drawer of a workshop bench. I wanted to use existing separators in the drawer, so I designed the boxes with slots…
This is a simple modification of the great Kabelkanalabdeckung 30x15mm to match my Cable Duct.
My Joe Blow Sports floor pump leaked air at the Schrader side of the pump head. The Topeak Rebuild Kit did not fix this issue. I created this simple plug that seals the Schrader side, which works just fine. Don't use, if you need to use…
This is a Skadis holder for Echo 1st generation. At first I've had fears it could break because of the heavy weight of the Echo, but it works just fine. Print in PETG or ABS with three contours and about 50% infill for best stability.…
After adding a BTT SKR 1.4 Turbo board to my Sovol SV01, the lid did not close because of the large heat sinks of the stepper drivers. This extension adds 4mm to the body – scale to your needs. Print two sovol_extension_frame.stl or use a…
I needed a funnel adapter for my MattMill Student malt mill so I constructed this one in openSCAD. Tweak the parameters to use it for other purposes. Print Settings Printer: Fabtotum Rafts: Doesn't Matter Supports: No Resolution: 0.3 mm…
Those soundproofing inserts were destroyed by repeatedly attaching and detaching the radiator from the quick mounting brackets, so I designed replacements ones. -- Durch wiederholtes Montieren und Demontieren der Heizung von den Cosmo…
These are all currently available results.
