Counting matching models…
I added a loop to my UFO model, so it can be attached to a keychain. The UFO is made out of three parts, every part can be printed in a different color/material. (I used a luminescent filament for the top) The parts fit very tightly…
Star Wars inspired cantina playset for 3.75" action figures, made by me. Featuring a bar, grill, benches and tables. Every piece can be printed with an FDM printer. Glueing the pieces together is required! I printed mine in PLA on my…
Death Star Wall Diorama for 3 ¾ action figures. Assembly instructions: Print the parts (0.2mm) ( no supports needed! ) Cut out a piece of white paper (size: 105mm x 55mm ) Put the paper into the back of the front panel Snap the back panel…
Throne Room Diorama for 3 ¾ action figures. No supports needed. No glue needed, simply slide the wall piece into the floor piece. Created by me in Fusion 360. Printed in Fossil Gray PLA.
I recently bought and restored a Kenner Imperial Shuttle from 1984. The wing mechanism was broken, I looked online for free replacement parts, but I couldn't find any. So I made my own in Fusion 360, enjoy! Print instructions: For a full…
Organizer holds: 4x Tamiya Weathering Masters 2x Bottles of Tamiya Panel Liner 1x Tamiya Paint Thinner 4x Brushes Cotton Swabs Print instructions: Printed with PolyTerra PLA mint color, 0.25mm, 5% infill, no brim, no supports Inspired by…
Stand with imperial logo for the Bandai Death Star 2 / Star Destroyer model kit. Print instructions: Print at 100% infill No supports 0.15mm
Retro Cantina Playset for 3.75" action figures. Everything prints without supports, glueing not required. Paper Backdrop: Two version are available: one with a slot for a backdrop and one without the slot. I printed my backdrop on office…
Printed in PLA No Supports or glue required! You have to apply pressure when putting the box together, the parts fit very snug! How to assemble: Snap the box and belt together Press the buckle into the two holes Size: Width, Length: 80 mm…
Easy to print keychain, can be printed with multiple colors.
Very small tree topper, print with supports Height: 115mm Hole diameter: 15mm
Small Dead Blow Hammer for model building, etc… The TPU faces can easily be put on / switched out. The handle screws on. Handle size: 125mm Hammerhead size with faces put on: 80mm Printing tips: Print the faces in TPU, 100% infill (I used…
Small Birdhouse Key Hanger Hole on the back for wall mounting Supports needed for printing Printed my parts with 0.25mm layer height and 15% infill Parts snap together, no glue required After inserting the key hook, snap in the bird and…
Small UFO model, designed by me in Fusion 360. The UFO is made out of three parts (+ the beam), every part can be printed in a different color/material. (I used a luminescent filament for the top part and the abduction beam) The parts fit…
45 RPM UFO Record Adapter, remix of my own UFO design. Adapter size: Outer Diameter: 1.5" Inner Diameter: 9/32" or 0.286" (RIAA record standard) Print instructions: The only part that requires supports is the middle part of the UFO. Use…
Simple holder for MT106 Mr. Hobby Nippers, protects the blade tip. Print settings: no support, 10% infill, 0.2mm
Simple holder for the GraphGear1000 Pen. Can be mounted to a flat surface using double sided tape. The tip of the pen has to be retracted to fit into the holder. Prints without supports/brim.
Retro christmas ornament, depicting Harry swinging on a vine from the Atari 2600 game Pitfall!
These are all currently available results.
