Counting matching models…
8" f/4 Reflecting Telescope - Inspired by the Iconic 114 Hadley Embark on a journey to the stars with this custom-designed 8" f/4 reflecting telescope, a project deeply inspired by the legendary 114 Hadley . Building on the principles of…
A focuser mount for the hadley and a cheap aliexpress crawford focuser. This is the focuser that I had purchased off of aliexpress, cheap $15 focuser.…
ningThis is a macro pad with a 4x4 key matrix and 2 rotary encoders that I designed and configured. I configured mine with QMK . Note, the links included are amazon affiliate links - so if you end up buying any of them - you're supporting…
This is a remix of one file from the Daveley mount, the tripod base file. The heatset inserts that I used with the original had like 3mm sitting outside of the plastic. I believe that was causing some wobble in the mount itself. This is…
Please check the original model for all information. This model is essentially the same. The only physical difference is that I used these 48x0.75 extension tubes instead of the 42x0.75 extension tubes. The only difference in practice is…
A fan shroud to sit on top of an AV Receiver that's 26x40cm. Uses two 80mm fans mounted inside the shroud to pull air off of the receiver. The fans pictured are these from amazon . (affiliate link)
This is an ergonomic, 38-key, VIAL compatible keyboard based off of the corne/crkbd but with a larger column stagger. I designed the board to be hotswap and use cheap SMD components. You can find the repository for this board on my github…
A 66mm bahtinov mask for the 135mm Oshiro f2.8 prime lens.
A simple printed box to get a USB-C port from a max 14s Ebike battery. This will allow you to hook up to an ebike battery with a maximum 60v and get a 65W USB-C port. Here are the things you need to buy all supplies can be found on…
A bracket to hold up the bottom of a dresser drawer. Uses 2 screws to attach to the side boards on the dresser and then has a nice stable shelf to hold up the weight of the drawer contents.
These are feet for those of you using 13x11 carbon fiber tubes as your rods for a Hadley telescope These are the rods that I use in my Hadley:…
These are all currently available results.
