Counting matching models…
This is a set of boxes with magnetic lids for the armies in the board game Neuroshima Hex. It should be fully compatible with Neuroshima Hex 3.0 and the 2020 Morloch Edition. There is a box for the standard armies (plus the special HQ…
UPDATE (2026/01/23) - Added an STL model that has been scaled 200% larger named Conversation-Heart-Candy-Romantic-2xScale.stl. This appears to be especially helpful with some printers and the Orca Slicer. This is the first in a possible…
Vase with a 1930s style to it that is designed to be a stage prop using magnets to allow it to be broken and re-assembled. Height : ~405mm or 16 inches Width : ~139mm or 5.5 inches It is designed to to work with 4x4mm round magnets at…
The support tops have been shifted 45 degrees forward to facilitate adding and removing spools when installed inside the dry box. Due to this change, you must print three copies of each enclosed support for six supports (assuming you only…
This model takes Benchy and strands it on top of one of the humps of an oblivious and somewhat derpy Nessie (the Loch Ness Monster). MAKERS: Please post a picture with comments here of any prints/makes you do from this model so that I can…
This is a locking clasp made to hold together magnetic PTFE connectors based on this design: https://www.printables.com/model/32368-join-ptfe-tubes-together-magnetically And remixes like my minor one here:…
I made this model to hold the five Prusa filament rollers that ship with the MMU3. And then mount them inside my (un)Original Dry Box using these dry box mounting adapters . This parametric model should be easy to modify for many other…
A replacement foot base for Rival crock pots / slow cookers. I recommend printing this on its side, as it will make the tabs a bit stronger and less likely to split, by changing the direction of the layer grain. Recommended infill : 25%…
The Underwater expansion for the Outlive board game was only ever released in retail and does not come with components that match what was designed for the Collector's Edition. Due to this a few people have made models of the robot unit…
This is a 3D Benchy remix inspired by the Pixar movie UP! It is designed for 3D printing and can be printed with supports. It is balanced and can be placed on a flat surface or hung up for display. Printing the balloons in multiple colors…
This is a simple remix of a rear-facing PTFE filament guide for the Original PRUSA Enclosure that can be used with the MMU3 and other similar external solutions to handle your filament. NOTE : This model should be loaded into your slicer…
This duct is designed to re-direct the heated air more thoroughly throughout the dry box. I also adjusted some of the wall angles to make it easier to print this with the back wall on the print bed so that the tabs that hold the duct to…
This is a remix that attempts to create a new robot unit for the Outlive Underwater expansion that closely matches the style used in the Outlive Collector's Edition while also having a robot that matches what is on the expansion's cover…
This model is heavily based on the Original Prusa Enclosure RepBox 2.5 Stand by techis, which is, in turn, heavily based on the RepBox stands from Kyle and MakoDaShark. Updates: 2024-04-01: Added two optional posts for the back of the…
This is a replacement for the Frigidaire 318242275 (Electrolux ICON) stovetop knob bases. Although the part you grab is metal, the base is plastic, and the knob post that connects to the stovetop often cracks at some point, and then the…
This is a remix of the PSU mount for the (Un)original Prusa Heated Drybox to make it work better with the 5 PC4-M10 connector location from the A1 & A2 PC4-M10 with Five Exits Drybox remix component.…
This is a case for the Adafruit Macropad paired with a Pimoroni trackball on the right side. Hardware Requirements: Adafruit Macropad - Barebones Slim Rubber Rotary Encoder Knob - 11.5mm x 14.5mm D-Shaft 12 Mechanical Key switches ( e.g.,…
This is a simple filament guide to try and prevent the filament from jumping over the spool edges when it is rolling back onto the spool slower than the speed with which it is being fed back from the MMU. MAKERS: Please post a picture…
This remix of Dakanzla's Catan Harbor Base model replaces the sailing ship with Benchy. You will almost certainly want to print out many of the other Catan components for the set from Dakanzla's complete Catan-style boardgame 2.0…
This simple hanger will conveniently hold your MMU Loading Fork on solid surfaces. Requires some form of adhesive instead of screws to attach to the hanging surface. I used Velcro tape to attach it to the back of my MMU3 buffer, which…
This adapter allows alternative simple filament rollers to be mounted in the (Un)original Dry Box. This model is primarily designed to work with my Prusa MMU3 filament spool roller adapters . MAKERS: Please post a picture with comments…
This is a lightweight handle for the top of the (Un)original Prusa Dry Box. You can attach it by replacing the original M3 screws with two longer M3x12 screws. I made it so I would have something to hook my enclosure's hinged lid hanger…
This hanger can be attached to the handle to hold the Original Prusa Enclosure's hinged lid in an elevated position when you need access but can't raise the lid enough for it to rest on the back hinges. You can attach the hanger in…
This is a very simple (and almost undoubtedly overbuilt) tool for aligning the geared springs included in many filament auto-rewind systems. The measurements and sizing for the tool were explicitly based on this model but are likely to…
A camera arm with a standard 1/4"-20 threaded connector for mounting a camera in the corner of the Prusa enclosure. I strongly recommend printing the version of this model that takes a Standard 1/4"-20 Male to 1/4"-20 Male Threaded Tripod…
These are all currently available results.
