Counting matching models…
Handle to be used with swiffer duster little mop to clean up dust around our workshop and of course around home! I design it cause the original one it's ugly and not really practical and I lost it... anyway if you have one you can then…
While the lockdown gardening shops were closed, but spring was already in! So had to quickly model and print a pocket shovel so solve some gardening time! Print without support and so far very solid! Print instructions PLA 0.2mm height, 3…
Since was almost impossible to find a bleed block for my Shimano brakes I've checked the measurements of the original one and printed it. Works great! Print and check thickness should be between 10 and 10.2mm to get regular bleeding of…
Printed in PLA black to achieve a nice and strong print is printed facing down, textured and smooth beds are giving very differents finishes. Link to the thermohygrometer available on amazon:…
I believe in having little tools out of drawers, just my favorite few ones that I use almost daily. This holder will fit just three pens/markers/small tools. To organize and minimize the "paradox of choice". Fits SKADIS system and…
Replacement Knob for the shift of Peugeot Ranch/partner and Citroen Berlingo cars, fit quite snug, I used PLA, but consider heat resistant plastic in case the car gets very hot on the sun... I managed to fit in the original knob swatch…
Caps to close the center hole of my DEZENT rims, it provides a very snug fit, I'm using them currently for over 15000Km without any issues. I printed my in Transparent PETG and then used a black uniposca marker to paint the external area,…
Phone clamp to mount it on a standard Bike Garmin mount Pixel + Sagen cover, fit a phone with: 76mm wide by 13mm thick printed in Prusament PC blend for added strength, but got great results also in PETG. DISCLAIMER: Be mindful your phone…
Self-standing, self-explanatory, self-made paintbrush holder, works with brushes up to 18mm in diameter and with any pen, pencil, marker. enjoy! Print instructions Category: Tool Holders & Boxes Summary Self-standing, self-explanatory,…
I'm a designer and a tenkara fly fishing angler, I was wondering to design my own spool to store the lines... I tried the one designed here http://www.thingiverse.com/thing:232208 by @ecleticangler and I decided to design my own spool…
I've designed this custom nozzle to clean medium-sized surfaces like desks and drawers without using the large “mop style” rotating brush used for the floor. It works also great to clean car seats and large surfaces. I've printed my in…
Designed to organize and keep safe the blades of a Kenwood multipro, blades diameter is 150mm. It is designed to fit 3 blades, I've printed my in PLA, the overall print is a massive 13H, but doesn't show particular critical points of…
My final filament clip, works on both 3 and 1.75mm filaments, flexible, ABS, PLA, HIPS, PC, NYLON. Tested on multiple filament spools, it has an improved snap on effect and it allows to insert different filaments in the groove. It takes…
Disassembly instructions from ifixit: https://it.ifixit.com/Guida/Bosch+Ergomixx+CNHR26+Heat+Fuse+Replacement/74075
Hook that can fit IKEA IVAR side supports. Available in 12 and 6mm width of the hook tip. The snap-on is pretty satisfying and avoids unintentional detachment of the hook. Printed with 3 perimeters in 0.3mm layers and 20% fill in 18min on…
Designed and printed in less than 1 hour, to help load the coffee into the small Bialetti 1Cup basket, works great! Printed in PLA Galaxy Black If anyone needs 2/3/4/5/6 cups size, just send me the exact internal diameter of the funnel…
Kitchen tools organizer with hooks, It is designed to fit a 90° corner on any furniture, to be completed it requires a 16mm aluminum hollow tube of the length that you prefer, depending on your needs. It is fixed in place with some thin…
this part is designed to replace the exhisting beams supports, the original are made of thin PE-HD plastic and tend to rip off. Designed couple of iterations and seems working fine. Print instructions PETG 0.3mm layers 20% infill Support:…
Printed out of PLA can be a safe solution to stop small parts and hairs to fall into the bath tub drain hole. Fitting drainage hole with diameter between 44 and 60mm roughly, I've designed it for my that is a 45mm. I've designed my during…
USB cables organizer for desk, designed to fit a 26mm desk and fitting a 25mm gap I left between wall and desk for cable routing purposes. I've printed my in PLA and looks pretty good, prints without support, positioned with the larger…
Tiny lightweight box to organize small objects and tools on a desk.
I created this adapter to fit a SA scientific anglers spool together with some Rio spools. Printed in PETG with support 0.10mm layers 20% infill. The original SA "connector" is transparent and very hard to remove, did it by tapping softly…
Cages designed to hold and protect a Mobius camera, it's attached directly to the quadcopter frame from the same screws holding the top-plate. Designed to be lightweight (around 8 grams) and protective for the Mobius lens. Available in…
I designed this small support to hold a couple of 40mm fan, the plate is made to fit aluminum profiles of a mendelmax 1.5! I'm using it as part of the cooling system of the electronics. UPDATE: User @Ubermeisters try it on his Mendel max…
I designed these side walls to protect all the electronics components from the grass and the dirt moved by the propellers, the spacers for the bottom are great to fit the 4 esc and the power distribution board in between the two…
These are all currently available results.
