Counting matching models…
Jack, Sally, Oogie Boogie are characters from the Nightmare Before Christmas movies & books, made into rubber duck style models, closely replicating the Tubbz brand toys. These are sized to match the other sets I've created, so that your…
This design was created to partially replicate the ‘sea sponge’ that is often used to provide shelter to small invertebrates and fish fry . Measurements: 3.1" in diameter (L) 2.0" (H) Holes range in size from 2mm - 0.5" in diameter If you…
This is a Dome cave hideaway primarily for Shrimp pet owners. It is currently scaled to fit Neocardinia Shrimp, but can be rescaled as needed. This hideaway cave can also be used to prevent your fish from feeding on their fry. Update:…
This Grim Reaper Decoration is super adorable; perfect for shelves, desks, practically any edged surface. This design was inspired by a decor item from Amazon that one of my clients asked me to replicate, and it turned out really well. I…
My adjusted Labubu version of the mask was tested and printed on a Flashforge AD5X using black PLA filament by Sunlu! Sidenote: Out of all the tests and print positions, this mini-mask comes out super clean if you print it laying down…
This is a cavern designed to fit aquatic invertebrates (shrimp, crayfish, etc) but can easy house fish-fry to keep them safe from larger predators long enough to allow them to grow big enough to defend themselves. The small beam in the…
This is a hideaway decor that can be printed and used in terrariums or fish tanks to protect small/young creatures and provide them a shelter from larger creatures. If you are using in aquatics or wet terrariums, I would recommend using a…
Mickey & Minnie made into rubber duck style models, closely replicating the Tubbz brand toys. These are sized to match the other sets I've created, so that your whole collection will fit together perfectly. They are tested and printed on…
This design was made to be able to maintain any aquatic floating plants for aquariums. It is light enough to float at the surface, and heavy enough to prevent being knocked over by waterfalls or filter pumps and air stones. PETG is by far…
This Shrimp Tunnel stack is a safe haven for small invertebrates such as Neocaridina Shrimp or Dwarf Crayfish ! This decor item can even protect your baby fish from larger predators, giving them a better chance at survival and giving them…
This is a Beta Tunnel designed for fish tank & terrarium owners . This tunnel is perfect for Shrimp, Fish, Snails, Pleco, and a large variety of aquatic animals. PETG and ABS are the safest filaments to use for aquatic objects. PETG is…
This is a mock-rubber ducky but with a twist! Muscular traits and a Cowboy heart, you won't find another one like this! You're welcome to customize it as needed, if you want a Cowgirl style, you can do that too!! Will be testing this on…
This a cute semi-realistic monkey, perfect for sculptures or mini environment models! This was test printed on Flashforge ASA white filament and I highly recommend using ASA for minature prints! This filament is phenomenal and i literally…
Tested and printed using PETG Pro (which is safe for aquatic use and prevents leeching) Large circle, about 8 inches in diameter Printed using flashforge 5M Pro, white petg pro filament Added the updated version (V2) for better…
This remix I've created is specifically designed to hold together 2 pieces of paneling for creating the perfect fish tank lid! (plexiglass, acrylic, polycarbonate etc) If printing for a fish tank lid, please note that the hinge will…
This is a low poly design of an alligator. Was designed to be printed small for nature models or crafts! Test printed on Flasforge 5M Pro using ASA white filament. ASA in my opinion is one of the best filament types for miniature prints…
This model was test printed on a Flashforge 5M pro, using PETG white flashforge filament which does not leech into your tank waters and is pet safe. It floats perfectly and keeps your floating plants maintained without worrying about the…
This organizer was designed to hold API Freshwater Test Kit materials, but can be used for any type of organization basket you might need! The holes in the basket do require supports, trees recommended. This model was tested and printed…
This was designed and tested as a miniature version for decorative purposes , and has not been tested to hold real fruit or anything. The handless version is 'print in place' and the handled version requires supports . Tested and printed…
This perch is designed for the Nativity Dove (scaled to 190%) for a nice shelf decoration! The original dove is a miniature, but scaled to 190% will be perfect for the Perch Stand I designed. Tested and printed on my Flashforge AD5X using…
Retired these sets from my shop, offering these designs free! These are fun little trinkets, perfect for shelf decor or having some cool backpack keychains! Printed and test in PLA & in PETG, perfect prints every time!
This design is to prevent other aquatic species from eating all the bottom-feeder food. If you have a community tank with multiple species, this feeder cage is a must have. It helps your smaller species obtain the necessary nutrients they…
This tool set is created to allow aquatic hobbyists to be able to gently scoop up floating plants. Makes routine tank cleaning and/or tank redecorating much easier! This was tested and printed on a flashforge 5m pro, using natural white…
For this model, it can be printed upright (for less filament waste and minimal supports) but make sure you add tree supports to the underside of the handles . Some machines might be able to print in place without supports but I'm…
You can print in one go (for single color printers or hand painters) or you can print in parts (for multicolored prints.) Tested and printed on flashforge AD5X multicolor printer, and assembled after print.
This was created primarily for smaller items , so the walls are on the thicker side to protect valuables (jewelry, crystals and stones, charms, small trinkets etc) and has not been tested in Large yet. The knobbed handle was added for…
This design is to prevent your Java Moss (or any moss) from breaking loose in your fish/shrimp tank, serves as a standing basket or a safety pillar for fish/shrimp fry to escape predators in your tank. This model was tested and printed on…
This utensil organizer was designed to hold your everyday kitchen utensils, but can be used for an array of other organizing needs! I was going for a nice backsplash look for the outer design, a mix between brickwork and tile to match…
Needed some cute decor for my corner shelf, so I came up with a couple designs resembling our pets! 2 dogs (left Siberian Husky & right Papillon), you can print as a bust or as a statuette, and the plate can be printed by itself as well.…
This Aquatic Feeding Den aims to allow slender bottom-feeding fish, such as Kuhli or Neon Loaches, during feeding time or to give them a place to hide without being disturbed by larger aquatic species. This Den also will allow any small…
Needed some cute decor for my corner shelf, so I came up with a couple designs resembling our pets! 2 fat black cats, you can print as a bust or as a statuette, and the plate can be printed by itself as well. The left cat with wide eyes,…
This is a staff building kit, easier to print and assemble. Also reduces filament waste and print time! You can adjust the colors depending on what staff you want to print. Black/Purple = Amaranthine Staff Silver/Blue = Fog Staff Or play…
This fluffy cat was inspired by 'The Last Unicorn' character "the pirate cat".
This fat cat was made to resemble the Fat Cat mount from Final Fantasy XIV Online.
Supports are needed as there are some "floating regions", but they aren't difficult to remove. Tested and printed on flashforge ad5x using white basic PLA filament.
These sticker dispensers are re-sized to fit my: Big Roll 5" diameter (up to 1" wide) sticker roll Wide Roll 3" diameter (up to 2" wide) sticker roll Tested and printed on my Flashforge AD5X & Flashforge 5M Pro using PLA filaments.
The Floating Barricade Kit will help aquatic hobbyists maintain their aquatic plants while doing water changes. As the water level decreases, the floating device will float with your water level (within bracket limitations) and keep your…
Retired these from my shop, sharing the designs here for free! Perfect shelf decor, and even cooler mini's! Tested and printed in PLA & PETG! Supports needed!
Version 1 is a figurine model, doesn't sit up on it's own but is super cute to hold! Version 2 is a keychain model, perfect size! Created to be printed in multiple color parts, assemble after print. Tested and printed on flashforge AD5X…
This den was designed to allow smaller aquatic creatures to hide or eat in peace, without being disturbed by other tank mates. This can also be used as a “baby safehouse” for smaller creatures to escape potential predators. If you need to…
The parts can be resized however you need! If they are too large for your print bed, I recommend using "split" and add "connectors" for a super clean cut and assembly! Tested and printed on Flashforge AD5X, Creator 5 Pro, 5M Pro machines…
This pendant is roughly 5.5" x 4.5" and can be used for cosplay/costume purposes. Tested and Printed on Flashforge 5M Pro using PLA white filament.
These can-sleeves should be printed in TPU filament for best fit and flexibility, but you can print in PLA or other hard filaments and adjust as needed. You ever have a drink can with the bottom bulging outward? This can-sleeve accounts…
Here are some tips to help you decide on your size need: - XL stands 70" tall, just shy of 6 feet (5 staff segments) - L stands 62" tall, a little over 5 feet tall (4 staff segments) - M stands 54" tall, about 4.5 feet tall (3 segments) -…
We had a new ceiling exhaust fan installed in our bathroom which left a hole in the ceiling and no wiring panel was included, so I came up with a simple-fitting electrical cover that is the perfect weight and thickness to protect your…
The tin's lid can be attached post-print in any angle you want. There is a indent on the back of the tin where the lid will sit, adjust as needed and adhere it in place. May need a small flathead to clean the tiny supports around the…
The parts can be resized however you need! If they are too large for your print bed, I recommend using "split" and add "connectors" for a super clean cut and assembly! Tested and printed on Flashforge AD5X, Creator 5 Pro, 5M Pro machines…
This is a character I've designed from Final Fantasy XIV. The hat is the 'King Tomato Head' glamour helm, and the robe is the 'Rogue Armor' glamour robe. Tested and printed using my Flashforge 5M Pro, eSun white pla filament
These are all currently available results.
