Counting matching models…
The case comes in 5 parts: Frame for the LCD Middle flatpiece Raspberry Pi cover (snap-fit*) two legs The LCD frame is pretty tight fit so make sure your printer is properly tuned. You need 4x M3x6 screws to mount the flatpiece to the LCD…
Edit 29.09.2022: I added an improved top cover with integrated buttons (no longer losing those tiny parts!), similar to the Prusa mk3s reset button. Also added holes for LED where the LEDs actually are - the old one had a hole for viewing…
A small clicking toy to help you relieve your stress. It has a small window at the top so you can see the rotating gears inside. How to print: Orientate all parts flat on the bed (might need to rotate top cover). Paint supports underneath…
A simple gecko model I made in blender. It prints fast - ~20 minutes on my printer No need for brims, rafts or supports - optimized (flat contact surface on bottom layer) for 3D printing! Print Settings Printer: DIY Rafts: No Supports: No…
The tools that came with my BIQU B1 printer were just laying on the table and made a mess, so I designed this simple box to store it all (beside the rubber duck, duh!). It can store the wire cutter, nozzle wrench, allen keys, 3x UM2…
I made a case for LCD Keypad shield for arduino uno. The case holds on to the shield itself, so the shield can be detached from arduino togather with case. The buttons are integrated in the case itself (similar to reset button on prusa…
I needed some kind of protection for my nucleo board so I won't kill it with ESD. I tested it with the L452RE and L452RE-P (the variants with miniUSB and microUSB), but it should fit most if not all Nucleo-64 formats. You need M3x8 screws…
A simple yet cool case for T-Display-S3 ( link to produc t), without touch. I made it in FreeCAD and used the original step file as reference ( can be found here ). Just print the both parts (orient the top part flat on the bed in…
I needed to bolt some stuff to the aluminium extrusion profile I found in the basement. Found out that 4545 is rather exotic/not as popular as 2020/4040, and other tslot nuts doesn't scale linearly for this extrusion, so had to make my…
Again, I haven't found a suitable case for THIS specific ESP32 variant, so I had to make my own. IT is fairly simple, prints in ~1h (0.3 layer, 3 perimeters, 10% infill), has buttons integrated in top cover and GPIO headers accessible…
A very simple model of a gokart. Just print the gokart_v3 and 4x wheel @0.3mm layer, wheels should snap-fit on the axles easily. Depending on tolerances, wheels might be a bit too tight - just give them a spin, they should start turning…
A remix of the https://www.thingiverse.com/thing:3146398 This is my version of the soda sombrero. The original was intended to be used as a bottle cap, which is something I wouldn't do due to hygienic reasons, but I would very much want…
I haven't found any case available for this particular model so I made one. Big thanks to @DomesticHacks - I used your 3D model as reference to save time…
Work in progress (?) I get heat creeps with this build and constant clogs. Apparently the hot end cooling is not sufficient. This is a simple mount for the E3D V6 hotend for Biqu B1 printer. tl:dr Print both parts, drill the top metal…
I was tired of my Mi Band 4 constantly unlocking and falling down at random - the original strap is just @#$% - so I got a crazy idea - lets put it on a paracord bracelet! It looks more bulky than the regular “sport smartband” on silicon…
Simple minimalistic snap-fit case for arduino nano with USB-C connector (aliexpress clone, since official logo is nowhere to be seen). It has button incorporated into the top lid and small window for viewing LEDs. It can allow for safe…
A remix of the https://www.thingiverse.com/thing:2144527 The original V2 was a bit too big for me, so I edited it in blender. It is oriented flat now, about 95mm high, fit most small-normal sized devices, but bigger DIN-Rail devices like…
Couldn't find any printable case for my new dev board, so I went to design my own. While doing it, I had to model the board itself first. This is a simplified 3D model of the new Black Pill development board with stm32f4xx (I got the…
A simple case for new black pill dev board (version with stm32f411x, should be compatible with stm32f401x, not to be confused with old black pill with stm32f103). No screws needed, top should snap on the bottom. Bottom holes should fit…
Print at .2mm layer height. Use small supports for the bottom part. Use knife to remove them if necessary - otherwise the snap thingy wont work.
Modified DIN rail bracket for arduino mega + ramps. Uses M3 nuts. Additionally I made a cover for the electronics to protect them a bit.
Simple box to store up to 12 soldering tips. My tips are compatible with beloved 936 soldering station. They are <7mm in diameter and <45mm in length. Orient it flat on the print bed (rotate the lid so the slanted rail is at the top). It…
A case to hold gameport adapter with pro micro with USB-C port. Check the project here: https://github.com/necroware/gameport-adapter
I recently got new filament for my prusa printer and was having trouble with default profiles. XYZ cube doesn't feature any meaningful tests, and benchy is taking too long to print. I needed something simpler that would let me see if…
A very simple, wall mounted hook. You need 2 of those, and four 4x16 wood screws (or longer). I used them to organize my tools in my shack. Print on the side, no supports needed. 0.3 layer 4 perimeters 3 top/bottom layers 25% infill
Inspired by https://www.printables.com/model/219646-lg-27ea33-storage-trays/files I decided to make similar trays for my monitors. Mirror the right container to have both sides with small compartments, or add your own in blender
A simple case for yet another USBasp dongle. This one has “USBASP v2.0 LC Technology” markings on it.
A DIN-Rail mount for Nucleo-64 boards. Remix of the https://www.thingiverse.com/thing:2610621
This probly isn't very usable on modern PCs, since there are no floppy drive bays anymore, but if you happen to own one of the older computers - chances are you broke some parts of it. This part lets you mount the power/reset buttons and…
A simple adapter for gopro/action cam and industrial jointed magnetic stand (8mm rod). Such stands are commonly used in CNC industry, to set up the machine and workpiece (or tool). They usually hold dial indicators. With this adapter you…
This is a wall mount for the fantastic universal filament spool holder by PurchenZuPoden. I am using it together with 2.6kg big filament spools (PETG by DasFilament) and it holds strong. Gypsum wall isn't as strong as concrete/brick or…
Edit: Added version without keychain addon and my .blend file A simple remix of the cool model by mirabatek. My changes: uses M3 screws instead of M2 chamfered edges instead of rounded (better suited for 3D-printing) open holes for GND…
A simple snap-fit case for cool usb tester from JOY-IT . Buttons are integrated with the case - no small parts, no complicated assembly. Just print the parts, remove the tiny supports (already included in model, dont use supports in…
This is a very simple case to protect the development board from dust and ESD, at least partially. Just orient both parts flat on the print bed and use whatever settings you feel like.
Simple rig to hold your pinetime devkit in charging dock. PineTime is a great hackable smartwatch. The Devkits come with loose back cover, so the programming pins are accessible for developers. Unfortunately, this makes impossible to use…
Simple cover for your cheap monocular. This way you wont risk damaging the lense during transport.
The original was too big for my binoculars, so I edited the snap-on bracket in blender. Then I noticed, that my tronic has round feature at the bottom, so I put a hole in the bottom part of the bracket so it fits. Also, I'm not a huge fan…
There are certain jobs that require you to work with siemens components on your desk - be it developing/testing software/PLC, commisioning a new system or service/repairs. Having MCP just laying flat is very annoying - it wobbles a lot.…
Our hair dryer came with stupid slide buttons, that no one could really use. To slide it, you had to use a lot of force, or break your nails. This upgrade provides you with new buttons, that are very easy to use. Hope someone will find…
I opened old hp inkjet printer/scanner combo and found this neat WiFi module inside. Then found out it can be used as USB WiFi-Adapter. The original design required you to make a tiny adapter PCB with USB-A male plug. Since I haven't got…
A simple case for yet another USBasp dongle. This one has “MSX" markings on it.
Simple case to house 27mm ring magnet, circular IR module and the ESP01S. Two M3 screws required (I used M3x4mm, but 6mm should also work). The module I used: https://www.ebay.de/itm/354359025520 Slightly inspired by the…
These are all currently available results.
